Online Catalog - Boring Machines - Vertical/Misc.

FEATURED PRODUCTS

AUTOVATION - PROGRAMMABLE VERTICAL BORER...

CASTLE [TSM 35] - POCKET BORER FOR FACE FRAME ASSEMBLY...

MAGGI [4632] - 46 SPINDLE LINE BORING MACHINE...

SICOTTE [J-3H-10] - 12 SPINDLE VERTICAL BORING MACHINE...

Page 1 of 3

<< First Page | < Prev. Page | Next Page > | Last Page >>

AUTOMAC [HOLECUT] - BAFFLE BORER

Inventory #3118

Capacity 36" maximum width.

4 boring heads.

2 for large holes.

2 for smaller holes such as woofers.

2 for tweeters.

2 5 HP motors.

2 3 HP motors belt driven.

Set-up...

View Specifications >

		Learn about Machines of Interest to Me >

AUTOMAC [LHBM-4] - MULTIPLE SPINDLE LARGE HOLE BORING MACHINE

Inventory #3560

Capacity this machine is used for the boring of baffles for speakers.

The machine is hopper fed with up to 4 holes being made at the same time.

The machine comes equipped with a scrap...

View Specifications >

		Learn about Machines of Interest to Me >

AUTOVATION - PROGRAMMABLE VERTICAL BORER

Inventory #17740

Capacity programmable vertical borer.

Slide on guides.

Infeed and outfeed roller table.

Foot pedal activation.

Good for drilling holes for backs on case units.

Single spindle...

View Specifications >

		Learn about Machines of Interest to Me >

AYEN [32-23] - 23 SPINDLE 32MM VERTICAL LINE DRILL

Inventory #22567

Capacity 23 spindles.

Single row with complete set of tooling.

Vertical line...

View Specifications >

		Learn about Machines of Interest to Me >

AYEN [ED08/4] - KNOT HOLE BORER

Inventory #20969

Capacity 0.6 kW (0.9 HP) motor.

4 boring spindles.

Max. working thickness 300 mm...

View Specifications >

		Learn about Machines of Interest to Me >

AYEN [OSB 23] - 23 SPINDLE UNIPOINT CONSTRUCTION DRILL

Inventory #22568

Capacity 23 spindle.

Drilling width 27 3/4".

Maximum panel pass through machine 33 7/8".

Drills vertically from the top and horizontally from the rear.

Features set stops at 45...

View Specifications >

		Learn about Machines of Interest to Me >

AYEN [SKB 50] - 50 SPINDLE HORIZONTAL AND VERTICAL BORING MACHINE

Inventory #22569

Capacity 50 spindles total in (2) swivel heads with (25) spindles each.

Drills vertically from top and horizontally from rear.

Drills at any angle between 0 - 90°s with a positive...

View Specifications >

		Learn about Machines of Interest to Me >

CASTLE [TSM 35] - POCKET BORER FOR FACE FRAME ASSEMBLY

Inventory #22572

Capacity single hole routing system for use with material from 1/2" to 1 3/4" thickness.

Castle's "A Frame" motor carriage is engineered to first route a pocket and then drill a pilot hole...

View Specifications >

		Learn about Machines of Interest to Me >

GRUM-SCHWENSEN [BMP 82] - MULTIPLE SPINDLE VERTICAL BORING MACHINE

Inventory #3548

Capacity (2) 1.5 HP motors.

2 separate control panels.

Foot pedal.

Table stays stationary while drill head assembly moves up and down.

8 heads drill minimum of 2" apart.

View Specifications >

		Learn about Machines of Interest to Me >

J P [2-HAD] - DRILLING MACHINE FOR DOOR HANDLES

Inventory #9959

Capacity minimum distance 1-1/2" and max. 4" centre to centre.

Drills adjust pneumatically.

2 adjustable spindles.

6 different adjustable settings.

Fits all drill bits with 10 mm...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 3

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.