|
|
|
|
|
 |
| Capacity used to measure radius of cutterheads. Allows for quick tool changes on moulder. 12" long x 6-1/2" base. 1-1/2" diameter arbor will handle up to 9-1/4" long tool body. |
|
|
|
|
|
 |
Capacity automatic outfeed transfer system for mouldings. 10' long. 12" wide max. width of stock. 4' - 16' length. Consists of (4) arms 3-1/4" wide non marring top chain running...
|
|
|
|
|
|
 |
Capacity 4-Head Profile or "S4S" Moulder (B,R,L,T), 150 mm X 100 mm (6" x 4") height/width, head sequence bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 10 HP, mono-block cast iron bed, all heads...
|
|
|
|
|
|
 |
Capacity through feed 5-Head (B-R-L-T-B), 200 x 100 mm (8" x 4") width/thickness, head sequence bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, bottom 10 HP, mono-block cast iron bed, all...
|
|
|
|
|
|
 |
Capacity 6-Head (B,R,L,T,T,B), 9" x 6" width/thickness. Head sequence bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP, bottom 15 HP, mono-block cast iron bed, all heads have...
|
|
|
|
|
|
 |
Capacity 6-head (B,R,L,R,T,B). With 8-5/8" x 4-1/2" cap. Head sequence: bottom 25 HP. Right 15 HP. Left 15 HP. Right 15 HP. Top 25 HP. Bottom 20 HP motor. Spindle...
|
|
|
|
|
|
 |
Capacity 240 mm (9.4") x 120 mm (4.7"). 2000 mm infeed table. 3 kW feed motor. Feed speed 8-16 m/min. Head arrangment: 5.5 kW bottom, 5.5 kW right side head, left side head, 5.5...
|
|
|
|
|
|
 |
Capacity max. width 170 mm. 10 cutting heads. Belt feed. 7.5 kW variable speed. Total draw 95 Amp. 73 kW. 65 kva frequency changer. Head configuration as follows...
|
|
|
|
|
|
 |
Capacity 6" x 5". Feed speed 18 - 45 FPM. 40 mm spindles. Head arrangement and power: bottom 5.5 kW. Fence side 4 kW. Near side 5.5 kW. Fence side 5.5 kW. Top 7.5 kW...
|
|
|
|
|
|
 |
Capacity material height: 1/2" minimum, 2" maximum. Material thickness: 3/8" minimum, 7/8" maximum. Spacing: no minimum, 3" maximum. Width of cut: (determined by tooling), no minimum...
|
|
|
|
* Price may vary with exchange rate.
|
|
![ACTIVA [AM69] - MOULDER 6-HEAD 9](/onlinecatalog/catalogimages/20557_thumb.jpg)
![WEINIG [UNIMAT1000] - 9](/onlinecatalog/catalogimages/22111_thumb.jpg)
![FUTURA [KRONO SS240/5] - THROUGH FEED MOULDER](/onlinecatalog/catalogimages/21686_thumb.jpg)
![HER-SAF [DMM-1003] - DENTIL MOULDING MACHINE](/onlinecatalog/catalogimages/22596_thumb.jpg)