USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY
MLS Canada Logo Members Of Spanner Site Search Help USED WOODWORKING MACHINERY
Sign Up USED WOODWORKING MACHINERY
MLS Machinery United States USED WOODWORKING MACHINERY
Contact Us USED WOODWORKING MACHINERY
Login USED WOODWORKING MACHINERY USED WOODWORKING MACHINERY
   

Online Catalog - Finishing Equipment - Spray Application 

Site Languages:  Français Deutsch Español Italiano Chinese Russian Vietnamese
Credit Cards Accepted: MasterCard Visa
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY
USED WOODWORKING MACHINERY
FEATURED PRODUCTS
SHENG FENG [SUPERSPRAY 350] - 14
SHENG FENG [SUPERSPRAY 350] - 14" WIDE AUTOMATIC MOULDING SPRAYER...
MAKOR [Q-ONE] - RECIPROCATING 53
MAKOR [Q-ONE] - RECIPROCATING 53" SPRAY MACHINE WITH PAPER BELT...


Page 1 of 1  << First Page | < Prev. Page | Next Page > | Last Page >> 
HI-TECH [CD 321509] - 32' X 15' X 9' SPRAY BOOTH  Inventory #13977
MLS MACHINE DATA
  • Capacity (1) cross draft spray booth.
  • Comes with supply and exhaust plenums.
  • Outside dimensions 31'6" wide x 14'6" deep x 8'8" high.
  • Inside dimensions 24'6" x 13'8" x 8' high.
  • Including: all 18 ga. satin coat panels.
  • Supports.
  • (10) 2 x 4 - 4 lamp fluorescent (less tubes - utility 120 V).
  • (10) 2 x 4 cast wired glass.
  • 1 set bi-fold doors - 9' wide x 8' high with windows.
  • (1) side access door with window.
  • (1) supply plenum (end wall).
  • (1) set SSP supply filters.
  • (1) exhaust plenum.
  • (1) set HE Andreas exhaust filters.
  • Extras: Air Line Interlock $210.00 US.
  • Manometer $95.00 US.
  • 24" diameter x 12' stack kit including 24" diameter x 36" duct with access door.
  • 3 @ 24" diameter x 36" plain ducts.
  • Tall cone flashing.
  • Weather collar.
  • Velocity discharge head $800.
  • Balance Control air make up air flow to booth exhaust $1,500.
  • Air make-up unit 8,000 CFM.
  • 60F - 80 F discharge.
  • Natural gas.
  • 1000 MBTU/H modulating burner.
  • 5 HP // 460 Volt // 3 Phase.
  • Insulated burner chamber.
  • Unfused disconnect switch on electrical enclosure.
  • Inlet hood with bird scree.
  • 2 position motorized inlet damper with seals.
  • V bank filter section.
  • Control panel ON/OFF.
  • Summer/Winter.
  • Temp. control $8,900 US.
  • Optional digital control ON/Off.
  • Summer/winter.
  • Temp control.
  • Digital readout $650.00 US.
  • Roof curb $550.00 US.
  • Duct 6' duct.
  • 4-way discharge.
  • 1-90*elbow $760.00 US...
Learn about Machines of Interest to Me >
DERDA [FLEX] - PNEUMATICALLY FIRED SPRAYER WITH EXHAUST  Inventory #14374
MLS MACHINE DATA
  • Capacity pneumatically fired sprayer with exhaust.
  • Totally enclosed spray booth comes with rollout recovery cabinets for easy changeover.
  • The single station unit integrates easily into any line whether as a primary unit or as an intermediate step including UV.
  • Include three guns and one pump and two conveyors.
  • (1) exhaust fan motor @ 1.5 HP.
  • Fan diameter 300 mm.
  • Fan delivery 4000 mc/h.
  • Workable height 900 mm.
  • Piece length 1000 mm min.
  • Piece width 10-180 mm.
  • Piece thickness 5-80 mm.
  • Teflon coated tanks is an extra $1,100 U.S...
Learn about Machines of Interest to Me >
HI-TECH [OF 100712] - 10'X7'X12' OPEN FACE SPRAY BOOTH  Inventory #18975
MLS MACHINE DATA
  • Capacity 9' 8" Wide x 3-1/2' deep x 12' high.
  • Open face industrial Spray Booth.
  • A slanted rear plenum creates an inside depth of 3-1/2' at the ceiling and increasing to 7' at the floor.
  • Walls & ceiling are 18-gauge galvanized pre-fabricated steel panels.
  • Filter bank consists 60 sq. ft. of ANDREAE filters.
  • 24" diameter exhaust fan with non-sparking blades.
  • Belts & drive pulleys.
  • 3 HP fan motor for 12,000 CFM free air.
  • (2) fluorescent light fixtures.
  • 48" x 24".
  • Uses (4) 110 V tubes per fixture (tubes not included).
  • 1/4" thick translucent wire glass diffuser.
  • Air interlock add $210.
  • Manometer add.$95.
  • 30" Exhaust kit add.$895.
  • Exterior dims: 10' wide x 7' deep x 15' high (with hydro shield)...
Learn about Machines of Interest to Me >
HI-TECH [EXHAUST24] - 24" EXHAUST KIT  Inventory #19409
MLS MACHINE DATA
  • Capacity full exhaust kit for 24" spray booth fan.
  • (4) 3' sections of 24" diameter duct.
  • One section with access hatch.
  • Weather collar.
  • Discharge hood with backdraft dampers and tall cone flat roof flashing...
Learn about Machines of Interest to Me >
HI-TECH [EXHAUST36] - 36" EXHAUST KIT  Inventory #19497
MLS MACHINE DATA
  • Capacity full exhaust kit for 36" spray booth fan.
  • (4) 3' sections of 36" diameter duct.
  • One section with access hatch.
  • Weather collar.
  • Discharge hood with backdraft dampers and tall cone flat roof flashing...
Learn about Machines of Interest to Me >
HI-TECH [OF 241409] - 24'X 14'X 9' OPEN FACE SPRAY BOOTH  Inventory #19519
MLS MACHINE DATA
  • Capacity 24' 2" wide x 10' 6" deep x 9' high.
  • Open face industrial Spray Booth.
  • A slanted rear plenum creates an inside depth of 10'6" at the ceiling and increasing to 14' at the floor.
  • Walls & ceiling are 18-gauge galvanized pre-fabricated steel panels.
  • Filter bank consists of ANDREAE filters.
  • (2) 24" diameter exhaust fan with non-sparking blades.
  • Belts & drive pulleys.
  • (2) 3 HP TEFC fan motor for 21,600 CFM free air.
  • (5) Fluorescent light fixtures.
  • 48" x 24".
  • Uses (4) 110 V tubes per fixture (tubes not included).
  • 1/4" thick translucent wire glass diffuser.
  • Air interlock add $210.
  • Manometer add.$95.
  • 24" Exhaust kit add.$895 each (2 required).
  • Exterior dims: 24' 6" wide x 14' deep x 12' high (with hydro shield.
  • Removable for lower ceilings)...
Learn about Machines of Interest to Me >
ACTIVA [AFEST] - 1300 MM (51") AUTOMATIC RECIPROCATING SPRAY TUNNEL  Inventory #21162
MLS MACHINE DATA
">
  • Capacity 1300 mm wide by unlimited length.
  • Max. thickness 125 mm.
  • Feeding speed is variable from 0.5m/min. - 15m/min.
  • Spray guns travel to a maximum of 80m/min.
  • 8 spray guns (not included) but can be quoted separately.
  • Air pressure 0.05 - 0.08 Mpa.
  • Machine automatically measures the size of the board and only spray's for the length and width of the board.
  • Also includes a belt cleaner with a recycling tray for re-using paint.
  • All electrical components are CSA and UL approved.
  • Optional Kremlin airless spray guns,as we recognize that customers might have their preference when it comes to selecting spray guns...
Learn about Machines of Interest to Me >
ACTIVA [AFEMS] - 205 MM MOULDING SPRAY SYSTEM  Inventory #21966
MLS MACHINE DATA
  • Capacity processing width 10-205 mm.
  • Processing thickness 10-205 mm.
  • Min. length 450 mm.
  • Feeding speed 0-50 m/min.
  • Working spraying guns max. 6.
  • Working pressure 0.5-0.8 Mpa.
  • Total power 2.25 kW.
  • The automatic profile spraying machine is a special machine for spraying mouldings or narrow long pieces on all sides.
  • Suitable for UV, PU, PE, NV.
  • Equipped with a UV lacquer reclaiming device to reduce waste.
  • The spraying machine can be used alone or it can be supplied with an inline drier in order for the pieces to be fully dried after spraying.
  • The machine is equipped with a PVC infeed and outfeed conveyor.
  • Under the spray guns are 2 removable drip trays for re-claiming excess paint.
  • The machine does not include the spray guns however it is recommended to use 6 guns...
Learn about Machines of Interest to Me >
CEFLA [ECO ROC 2/8] - RECIPROCATING SPRAY MACHINE (WET)  Inventory #22458
MLS MACHINE DATA
  • Automatic spray system with backspray-technology is specially designed for high quality base and top coats as well as stains on the surface and edge with no overspray on the bottom of the workpiece.
  • The overspray is collected and reused.
  • Workpiece recognition system with photocell bridge with 60 cells which controls the activation of the spray guns.
  • Infeed conveyor can be tilted and it is 1,650 mm long.
  • Entire belt is 6,152 mm long with variable feed speed.
  • Access door for spray guns.
  • Total air intake 10,000 cfm/h.
  • 2 x 8 ATX Kremlin guns can be mounted on two belt driven opposing sleds.
  • C/W TCM 221/1 Boellhoff pump.
  • Control cabinet with electronic controls...
Learn about Machines of Interest to Me >
CEFLA [ECO ROC 2/8] - RECIPROCATING SPRAY MACHINE (WET)  Inventory #22804
MLS MACHINE DATA
  • Automatic spray system with backspray-technology is specially designed for high quality base and top coats as well as stains on the surface and edge with no overspray on the bottom of the workpiece.
  • The overspray is collected and reused.
  • Workpiece recognition system with photocell bridge with 60 cells which controls the activation of the spray guns.
  • Infeed conveyor can be tilted and it is 1,650 mm long.
  • Entire belt is 6,152 mm long with variable feed speed.
  • Access door for spray guns.
  • Total air intake 10,000 cfm/h.
  • 2 x 8 ATX Kremlin guns can be mounted on two belt driven opposing sleds.
  • C/W TCM 221/1 Boellhoff pump.
  • Control cabinet with electronic controls...
Learn about Machines of Interest to Me >
ACTIVA [AFEMSW] - MOULDING 300MM SPRAY SYSTEM  Inventory #23198
MLS MACHINE DATA
  • Capacity processing width 10-300 mm.
  • Processing thickness 10-205 mm.
  • Min. length 200 mm.
  • Feeding speed 0-50 m/min.
  • Working spraying guns max. 6.
  • Working pressure 0.5-0.8 Mpa.
  • Total power 2.25 kW.
  • The automatic profile spraying machine is a special machine for spraying mouldings or narrow long and short pieces on all sides.
  • Suitable for UV, PU, PE, NV.
  • Equipped with a UV lacquer reclaiming device to reduce waste.
  • The spraying machine can be used alone or it can be supplied with an inline drier in order for the pieces to be fully dried after spraying.
  • The machine is equipped with a PVC infeed and outfeed conveyor.
  • Under the spray guns are 2 removable drip trays for re-claiming excess paint.
  • The machine does not include the spray guns however it is recommended to use 6 guns...
Learn about Machines of Interest to Me >
CATTINAIR [SMP 630] - MOULDING SPRAYER  Inventory #24216
MLS MACHINE DATA
  • Capacity developed to spray stains, polyurethane or waterbased paints on mouldings or similar.
  • Electronic adjustment of the conveying speed.
  • Large pull-out tanks for overspray recovery.
  • Dry air filtering system, display for speed, processed pieces and auto diagnostics, pneumatic control board. spray guns up to quantity of 6 but NOT included.
  • Min. size of piece 39" x 1/2" x 1/2 " (1000 x 15 x 15 mm).
  • Max. cross section of piece 9" x 3" (250 x 80 mm).
  • Conveyor speed variable 30-300'/min. (10-100 m/min.).
  • Exhaust fan motor and conveyor belt motor 3/4 HP each (0.55 kW).
  • New never used...
Learn about Machines of Interest to Me >
AMERICAN MACHINE CO. [VARIOUS] - LINEAR SPRAY LINE  Inventory #26537
MLS MACHINE DATA
  • Capacity 12" Width.
  • 4 Graco spray guns.
  • Graco President air powered pump.
  • Max.
  • PSI 180.
  • 3/4 HP Feed motor.
  • 3 Feed rolls 12" long x 2-1/4" diameter.
  • Fan motor: 1/2 HP 115/230 Volt // 1 Phase.
  • Fan diameter 18".
  • Table size 94" long x 24" wide.
  • Equipped with fire supression system...
Learn about Machines of Interest to Me >
GLOBAL [PEC-127] - SPRAY BOOTH  Inventory #26536
MLS MACHINE DATA
  • Capacity 2 HP.
  • 34" Fan.
  • 7' High x 12' wide x 3' deep...
Learn about Machines of Interest to Me >
N/A - OVERHEAD FINISHING SYSTEM  Inventory #27304
MLS MACHINE DATA
  • Capacity Overhead hook type finishing line.
  • Two (2) spray booths, One 7' x 7' and one 7' x 3'.
  • Approximately 120' of conveyor with one drive.
  • Homemade oven area using steam lines for heat...
Learn about Machines of Interest to Me >
DELLE VEDOVE [SPC/2] - MOULDING SPLITTER  Inventory #27347
MLS MACHINE DATA
  • Capacity 20" min. length.
  • 0.2 min. to 7" max. width.
  • 0.3" min. to 4" max. thickness.
  • (1) 6.6 HP - 7,200 RPM coping motor with 40 mm diameter shaft.
  • 200 mm max. tool diameter .
  • 13 to 23 mm cutting width.
  • 40 mm max. cutting depth.
  • Adjustable both vertically & horizontally by precision lead screws with digital readouts.
  • (1) 0.8 HP - 18,000 RPM grooving unit with 20 mm diameter shaft.
  • 50 mm tool diameter .
  • 4 mm max. cutting depth.
  • Variable feed speed 30 to 200 FPM.
  • Attached control cabinet...
Learn about Machines of Interest to Me >
SUPERFICI [TWIN SPRAY] - TWIN SPRAY FINISHING MACHINE  Inventory #28340
MLS MACHINE DATA
  • Capacity Twin Spray.
  • PC Based computer control system.
  • 53" max. working width.
  • 6-30 FPM.
  • Double reclaim trolley cleaning system.
  • Capable to switch color circuits on the fly.
  • (4) Kremlin air assisted guns and pump.
  • 4 Conventional guns and pump.
  • Can be seen.
  • Setup supervision & training / limited warranty...
Learn about Machines of Interest to Me >
HI-TECH [CD 251409] - 25' X 14' X 9' SPRAY BOOTH  Inventory #28352
MLS MACHINE DATA
  • Capacity (1) cross draft spray booth.
  • Comes with supply and exhaust plenums.
  • Outside dimensions 25" wide x 14' deep x 8'8" high.
  • Inside dimensions 24'6" x 13'8" x 8' high.
  • Including: all 18 ga. satin coat panels.
  • Supports.
  • (10) 2 x 4 - 4 lamp fluorescent (less tubes - utility 120 V).
  • (10) 2 x 4 cast wired glass.
  • 1 set bi-fold doors - 9' wide x 8' high with windows.
  • (1) side access door with window.
  • (1) supply plenum (end wall).
  • (1) set SSP supply filters.
  • (1) exhaust plenum.
  • (1) set HE Andreas exhaust filters.
  • Extras: Air Line Interlock, Manometer, 24" diameter x 12' stack kit including 24" diameter x 36" duct with access door.
  • 3 @ 24" diameter x 36" plain ducts.
  • Tall cone flashing.
  • Weather collar.
  • (Not included velocity discharge head, Balance Control air make up air flow to booth exhaust, Air make-up unit 60F - 80 F discharge, natural gas, 1000 MBTU/H modulating burner)
Learn about Machines of Interest to Me >
HI-TECH [OF 100712] - 10' X 7' X 12' OPEN FACE SPRAY BOOTH  Inventory #28345
MLS MACHINE DATA
  • Capacity 9' 8" Wide x 3-1/2' deep x 12' high.
  • Open face industrial Spray Booth.
  • A slanted rear plenum creates an inside depth of 3-1/2' at the ceiling and increasing to 7' at the floor.
  • Walls & ceiling are 18-gauge galvanized pre-fabricated steel panels.
  • Filter bank consists 60 sq. ft. of ANDREAE filters.
  • 24" diameter exhaust fan with non-sparking blades.
  • Belts & drive pulleys.
  • 2 HP fan motor for 10,000 CFM free air.
  • (2) fluorescent light fixtures.
  • 48" x 24".
  • Uses (4) 110 V tubes per fixture (tubes not included).
  • 1/4" thick translucent wire glass diffuser.
  • Includes air interlock, Manometer and 15' of stack tubing flashing for roof exhaust.
  • Exterior 10' wide x 7' deep x 15' high (with hydro shield)...
Learn about Machines of Interest to Me >
MAKOR [Q-ONE] - RECIPROCATING 53" SPRAY MACHINE WITH PAPER BELT  Inventory #28545
MLS MACHINE DATA
  • Capacity 53" max. working width.
  • 4 spray guns in a pressurized spray area.
  • With disposable paper belt system.
  • Quick interchangeable coating system within 4 available circuits.
  • Automation with versatility for small batches...
Learn about Machines of Interest to Me >
COLMET [OPEN FRONT] - SPRAY BOOTH AND FIRE SUPPRESSION SYSTEM  Inventory #28542
MLS MACHINE DATA
  • Capacity 1-1/2 HP.
  • 7,000 CFM.
  • 24" Round exhaust, With 12' piping with roof caps.
  • Open front.
  • Use solvent or H2O base materials.
  • Man-o-meter.
  • 1 Light fixture...
Learn about Machines of Interest to Me >
IST [EC0122-ECO202-ECO400] - SOLVENT RECLAIMER  Inventory #28590
MLS MACHINE DATA
  • Capacity 140 liters.
  • The reclaiming equipment consists of two separate units.
  • The main one is the tank where evaporation takes place, which is connected to the secondary unit, where the diathermic oil is heated and and the solvent vapour is condensed.
  • The working cycle is driven by a Microprocessor equipped with digital TOUCH SCREEN display carrying out diagnostic/alarm function and advising when any operation and/or ordinary upkeep is needed.
  • The solvent to be reclaimed is poured into the Stainless steel tank Aisi 304 and brought to a boil.
  • The vapours (volatile share), separated from the polluting substances, like ink, paint, grease, pigments, resin (non-volatile share), pass through the cooling battery, where they are condensed.
  • Finally they flow down into the collecting tank.
  • The residuals inside the tank can be removed using the valve placed on the bottom of tank (it depends on the type of residue) or through the manual pivoting system...
Learn about Machines of Interest to Me >
CEFLA [TRAFILA 200] - VACUUM COATER FOR PROFILES  Inventory #28649
MLS MACHINE DATA
  • Capacity max. profile width 200 mm,max profile thickness 100 mm.
  • Max. air pump capacity (10 bar) 75 l/min.
  • Operating speed 10 - 60 m/min.
  • Worktable height 880-950 mm.
  • Air required (6 bar) 23 l/min.
  • Pneumatic pump feed pressure 2-10 bar.
  • Air outlet 100 mm diameter,amount of solvent-laden air discharged 1000 m3/h.
  • Tank capacity approx 30 l...
Learn about Machines of Interest to Me >
SHENG FENG [SUPERSPRAY 350] - 14" WIDE AUTOMATIC MOULDING SPRAYER  Inventory #29142
MLS MACHINE DATA
  • Capacity for automatic spraying of moulding with maximum width of 14".
  • Minimum length 24".
  • Variable speed feed from 92' to 300'/min.
  • 6 (Italian) individually controlled Larius spray guns.
  • 2 circuits.
  • 2 double diaphragm Larius pumps.
  • Programmable automatic gun triggering with PLC computer controlled touch screen.
  • Air pressure adjustment up to 100 psi.
  • Dry spray or water wash filtering.
  • Reclaim stainless steel carriage catches overspray and drains into bucket...
Learn about Machines of Interest to Me >
Page 1 of 1  << First Page | < Prev. Page | Next Page > | Last Page >> 
* Price may vary with exchange rate.
USED WOODWORKING MACHINERY