Roll

Site Languages:

Credit Cards Accepted:

FEATURED PRODUCTS

FLETCHER TOLBERT [FM200D] - DOUBLE SIDED EDGE FOILER...

VOORWOOD [L-73] - CONTOUR FOILER...

BARBERAN [PL-32] - 300 MM PROFILE LAMINATOR FOR VENEER STRIPS...

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

PISTORIUS [FL4] - 4 HEAD FOIL HOT TRANSFER MACHINE

Inventory #14800

Capacity 4 head.
Variable feed speed 0 - 100 feet/min.
Accomodates material from 1/8" to 3" thick and from 1/8" to 4" wide.
Can be used with a steel embossing roller for light embossing.
Specially designed swing open frame to allow for quick change of top and bottom rollers.
Rugged cast iron and steel contruction.
Fully adjustable infeed and outfeed work platforms.
Heating element 8 Amp each.
1/2 HP drive motor.
Front mounted control panel with independent controls for each head...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L-73] - CONTOUR FOILER

Inventory #17511

Capacity applies transfer finishing foil to a non-linear pre-shaped and sanded edge of MDF parts.
15 Amp.
Single Phase.
Thickness of board 1/2" - 1" max.
Foiling supply roll maximum diameter 13".
Maximum width 1-1/2" and core diameter 3".
Applicator station 5" diameter foil wheel & vertical adjustment 1-1/2".
Variable speed stepper motor 4 to 18'/min.
1,125 hours on it...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM-200-D] - SCORE, TRIM, 2 SHAPE, 4 SAND DOUBLE SIDED EDGEFOILER

Inventory #19900

Capacity double sided machine for shaping.
Sanding & foiling.
Min. 4-3/4" and max. 80" opening.
2 HP traverse drive w/digital readouts.
Long extended infeed with hand wheel adjustable fence on left side.
Holddowns with powered.
Caterpillar type rubber belts for working small parts.
Front end thickness opening via hand wheel.
Tenoner type 5-1/4" wide feed chain with w/replaceable serrated urethane pads.
Dogs 20" on center.
Feed speed from 1 - 70 FPM.
Automatic chain lubrication.
7.5 HP feed drive.
Workstations each side - 1st Station: top score. 2nd Station: top or bottom 7.5 HP tilting trim saw.
3rd & 4th stations: high speed 7.5 HP - 7,200 RPM shaper.
1-1/4" diameter x 5" spindle.
W/vertical & horizontal adjustment & 90° tilt.
5-6 Stations: abrasive sanding belts.
7-8 stations: 5 HP adjustable disc sanding wheel.
Sanding units tilting and w/vertical & horizontal adjustment.
Open machine frame space for additional workstations.
Foiling stations: (4) single thermostatically controlled foiling heads w/dispensing & take-up reel.
180° tilt adjustment.
Automatic setup and separate controls for heat.
Pressure wheels up-or-down.
Rewind up-or-down and tensioning.
Last station: edge cleaning brush w/full adjustment.
Free-standing operator control panel at infeed and (2) individual foiling head control panels next to foiling stations...

View Specifications >

		Learn about Machines of Interest to Me >

AMERICAN UV [600] - 5-7/8" PROFILE FOILER

Inventory #20772

Capacity material width 3/8" to 5-7/8" max.
3-1/8" max. thickness.
2-1/4" max. foil stamping width.
Variable feed speed.
Powered steel rollers with spring loaded profile side guides convey material.
Eye-level height operator control panel at infeed.
Each station with: Profiled silicone rubber wheel foiling head and its own foil unwinding & rewinding unit w/tension control, foiling units are mounted on adjustable assemblies, which allows for precise vertical, horizontal and tilting movements.
7-3/4" diameter foil applicator heads with indirect Infra Red (IR) heating elements, with controlled timed "jump" activation and temperature control 0°s - 350°s C.
Approx 1.6 kW power consumption for each head.
Capable of foiling 20 FPM.
Feed through Foil Roll on machine for "hot stamping" of linear profiles.
Picture frames, moulding, furniture parts, etc., a vast variety of profiles can be decorated easily by hot stamping with this 3-station machine...

View Specifications >

		Learn about Machines of Interest to Me >

MAKOR [S/80] - WHEEL GRINDER FOR FOILER

Inventory #20782

Grinds the wheels with the counter pattern for use with the hot stamping operation...

View Specifications >

		Learn about Machines of Interest to Me >

HMA ADHESIVE SUPPLY [IN43-230] - HOT MELT APPLICATOR

Inventory #21521

Capacity 200lbs/hr.
High preformance Hot Melt adhesive applicator.
'No Char' melt-on-demand system.
Positive displacement gear pumping.
Electronic variable speed motor drive.
Digital temperature readout (all zones).
Electronic dial-adjustable temperature control...

View Specifications >

		Learn about Machines of Interest to Me >

DELLE VEDOVE [DEK/4] - 400 MM PROFILE WRAPPING MACHINE

Inventory #23357

Capacity profile width 25 - 400 mm.
Height 10 - 100 mm.
Length min. 700 mm.
Transport feed 5 - 80m/min.
Air pressure 7 Bar.
Working height 900 mm.
Roller width 40 - 400 mm.
Coating width 40 - 400 mm.
Color cream-white RAL 9001.
Consisting of: (1) substructure 4,800 mm long.
(1) main drive frequency controlled.
(23) work-piece transport units.
(1) surface Brush top.
(1) edge brush right & left side.
(1) IR-heater 1,5 kW.
(1) single unwinding station.
(1) clamping collar 152 mm (pneumatic).
(1) inverted pre-melting unit VSK with separate switch cabinet (incl. air-dryer).
(1) adjustable slot coater 0 - 400 mm wide.
(1) glue dosage control for slot coater.
(1) edge control for slot coater.
(3) pressure roller sets 800.
(1) pressure roller sets 200.
(1) pressure and guide roller 400 mm.
(1) control cabinet with p-touch screen...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L110] - SHAPE, SAND AND EDGE FOIL

Inventory #23855

Capacity 5 HP shaping spindle ( 1 1/4" diameter) for 6" max. diameter tooling.
1,500 RPM Turbosand rotary sanding head with 1 1/4" diameter spindle.
Feed through, single sided with 1 shaping, 1 sanding, 1 foiling station, all units are 0-45° tilting.
Minimum part size 5" x 2 3/4", thickness 1/8" to 1 1/2" max., 1 3/4" maximum profile face.
Foiling section has supply roll for 2" max. width, shaped applicator wheel with automatic heat control, adjustments 2" in and out, 1 1/2" laterally across and -10 to +50° angle from horizontal, film take up carrier rewinds with automatic tension control, stripper rollers for precision trimming on miters and edges.
18 FPM fixed feed speed, 1 HP feed drive.
Overhead hold down with 2 rows of tightly spaced non-marking rollers and feed chain with non-marking rubber pads.
Feeds from right to left.
Includes outrigger panel support roller...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM-85] - TABLE TOP FOILER

Inventory #24230

Capacity 41" x 77" fabricated steel table top.
Variable speed drive chain driven with air operated pressure roller.
Shaped silicone wheel externally heated, driven by a 1/50 HP gear motor.
Heat sensor will automatically cut heat on and off to maintain steady wheel temperature, sensor checks the heat directly from the roll.
Foil unwind spool with tension and up and down adjusting hand knobs.
Adjustable foil idler rolls.
Foil rewind spool has slot for easy foil tie and removal, driven by a variable speed torque motor.
Adjustable air operated holddown with pivot idler wheel.
Conveniently located up and down, in and out.
And tilting adjustment screws for fine adjustment.
Front mounted control box with temperature control, foil rewind, vari-speed tension dial, drive vari-speed dial, air gauge and regulators.
Safety guards cover heating unit and all drive gear pulleys and...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM-55S] - EDGE SHAPE AND FOILER

Inventory #25305

Capacity single sided shaper and foiler with following working units:2 foilers.
2 sanders.
1 jump groover.
1 shaper.
1 trim saw.
1 air brush...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L-73] - CONTOUR FOILER

Inventory #25759

Capacity edge panels from 1/2" to 1" thick with dry foil.
Foil roll support table for coils to 12 1/2" maximum diameter.
Friction brake for tensioning.
5" diameter heated applicator roller for application with 1 1/2" of vertical adjustment.
4 to 18 FPM feed speed.
Shapes, sands and foils.
Less than 40 hours on its clock.
Single phase power supplied with 5KVA transformer for 208 Volt...

View Specifications >

		Learn about Machines of Interest to Me >

BARBERAN [PL-32] - 300 MM PROFILE LAMINATOR FOR VENEER STRIPS

Inventory #25958

Capacity max. width 300 mm.
Cardan shaft drive up to 90'/min.
Bedframe composed of 23 transport wheels of 30 mm width and 23 wheels of 15 mm.
Driven by helicoidal gear transmission at 90°s.
Driven by speed variation from 6 to 36 m/min.
20 supports for fixing laminating tools.
Access guides of fast mechanical adjustment.
Application head of hot melt glue with guides for veneer access.
Adjustable mechanically and independent.
Speed variator to synchronize veneer with profile.
Premelting tank and second tank for melting of the hot melt glue.
Counterpressure roller of pneumatic control.
First molding roller.
Adjustable in height.
Cleaning brush for workpiece.
Glue injector EXTRUDER SYSTEM.
Spool station for veneer and paper foils in spools with glue discs and braking devise for the gluing with hot melt glue.
2 electronic heaters for hot melt glue reactivation.
2 cutters for cutting of material veneer surplus with 2 high frequency motors.
Adjustable in height and laterally orientable from 0 to 90°s.
Special roller for application of hot melt on paper foils.
Mechanical system of width adjustment in transport wheels.
Transformer for 2 heaters...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM-200D] - DOUBLE SIDED FOILER

Inventory #26234

Capacity 6' Opening x 4' loading space.
7.5 HP Universal motor.
2 Wheel sanders.
3 Foil application stations.
Brush.
Padded chain.
Caterpillar hold down track.
New in 1991...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM55S] - SINGLE SIDED FOILER

Inventory #26481

Capacity Stations: 7.5 HP trim saw, Jump cope 10 HP, Cope 10 HP.
Groover 2 HP, 2 Wheel sanders 1.5 HP each, 3 Foil application stations, Top & bottom brush units.
Hydraulic feed.
Rubber padded chain.
Hopper feed.
New in 1987...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [73] - CONTOUR FOILER

Inventory #26244

Capacity edge panels from 1/2" to 1" thick with dry foil.
Foil roll support table for coils to 12 1/2" maximum diameter.
Friction brake for tensioning.
5" diameter heated applicator roller for application with 1 1/2" of vertical adjustment.
4 to 18 FPM feed speed.
Shapes, sands and foils...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L73C] - CONTOUR FOILER

Inventory #26245

SOLD	Capacity laminates shaped and sanded edge panels from 1/2" to 1" thick with dry foil - Foil roll support table for coils to 12 1/2" maximum diameter - Friction brake for tensioning - 5" diameter heated applicator roller for application with 1 1/2" of vertical adjustment - 4 to 18FPM feed speed...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM-45] - SINGLE SIDED EDGE FOILER

Inventory #26664

Capacity Single sided.
Shaping head.
Belt sanding.
Around 80's.
2 Foiling heads...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM-55] - SINGLE SIDED EDGE FOILER

Inventory #26665

Capacity 1 Column 10 HP Shaper head.
(2) 146" Parallel sanding belts, 3 HP each.
Shape, Sand, Edge foil in one pass.
(2) 2 Head foiler units, 1994.
Outboard stock support.
Clean-off brush...

View Specifications >

		Learn about Machines of Interest to Me >

MAKOR [DRM4/1] - SINGLE HEAD HOT TAPE FOILER

Inventory #27282

Capacity 3/8" to 6" maximum width.
3-1/8" maximum thickness.
Wheel diameter 7-7/8".
6 kW output resistance.
Wheel temperature 550°s F.
Extra blank wheels and manual.
Less than 20 hours use...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM200D] - DOUBLE SIDED EDGE FOILER

Inventory #27553

Capacity 75" max. width.
Double sided.
Following stations each side has, tiltable saw, tiltable shaper head, tiltable belt sander, (2) tiltable foiler units...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L177B] - SINGLE SIDED FOILER

Inventory #27565

Capacitystations trimming with scoring.
Cutterhead.
(2) sanding heads.
Foiler with (2) pressure rollers...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L100] - EDGE FOILER

Inventory #28065

Capacity 5" Width x 3/8" to 1-1/2".
4 Heads.
0 to 70 Feed speeds.
Head sequence shape, Sand, Sand, Foil.
3 CFM.
100 PSI.
Under power...

View Specifications >

		Learn about Machines of Interest to Me >

HOMAG [NFL 26/8/25] - DOUBLE SIDED EDGE FOILER

Inventory #28599

Capacity work piece width minimum 150 mm, maximum 2500 mm.
Thickness minimum 8 mm, maximum 120 mm.
Workpiece over hang minimum 10 mm, maximum 110 mm.
Feed 8-25 m/min.
Width adjustment speed 2.5 m/min.
Dog spacing 1000 mm.
Machine stations are profile shaping and sizing,,profile sanding,,foiler applicator section with two application wheels per side.
And buffing.
Optional Extra for additional $19,000.00 infeed system...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L177] - STRAIGHT FOILER

Inventory #28604

Capacity part size minimum 2-3/4" x 2-3/4".
Thickness 1/8" to 1-1/2".
Top and bottom scoring 0.75 HP, shaper, 0 to 55°s tilt, 1-1/4" spindle, 5 HP.
(1) sanding stations each withadjustable counter-rotating Turbosand disc sander, tiltable -5 to +45°s, 1 HP motor.
2" wide double foiling applicator.
2 HP feed motor, variable speed to 35 fpm.
Control panel.
6" and 3" diameter dust outlets...

View Specifications >

		Learn about Machines of Interest to Me >

ZMD [859DS] - DOUBLE SHUTTLE 3D LAMINATOR / THERMOFOILER

Inventory #28900

Capacity pressing 50" x 101" (1270 x 2565 mm).
2 shuttle tables each 57" x 108" (1448 x 2743 mm).
The shuttle tables travel between heating and cooling stations are fully automated and servo driven for high production and long life.
3 HP oil filled deep vacuum pump.
Creates 29.7 hg and provides over 1 ton of pressure per sq. ft.
2 PVC roll holders each with a static bar.
Fully integrated PC Front End, Pentium PC, 400 MHz, 4000+MB Hard Drive and VGA monitor interfaces between the operator and the programmable controller (PLC) of the machine.
Heater bank sectioned into 31 independent heat zones.
Footprint 32' length x 10' width x 5'6" height...

View Specifications >

		Learn about Machines of Interest to Me >

VOORWOOD [L115CP-EXT] - SINGLE SIDED EDGE FOILER

Inventory #26108

Capacity 5 HP Shaping (6000 RPM) motor.
1 HP Feed drive.
TURBOSANDER.
2" Heat activated silicon coated foiling head.
18 FPM.
Work station sequence: shapes, Sands, Foils.
Tension control stripper roller.
Feeds from left to right.
This foiler shapes, Sands, And then applies transfer finishing foil to a single edge of your MDF or wood part in one pass.
Pads on grip chain hold the stock securely while passing the workstations.
Easy set-up.
Includes 1 box foil & 1 box of parts, Belts, Gripers, etc...

View Specifications >

		Learn about Machines of Interest to Me >

MAKOR [DRM4/1] - SINGLE HEAD HOT TAPE FOILER

Inventory #29517

Capacity forward speed 26 to 131 FPM.
Working width 3/8" to 6".
Max. working thickness 3-1/8".
Wheel diameter 7-7/8".
Max. outer diameter of spool 6-5/16".
Max. inner spool diameter 15/16".
Resistance output 8 HP.
Max. wheel temperature 550°s F.
This unit has less than 20 hours use...

View Specifications >

		Learn about Machines of Interest to Me >

HOMAG [OPTIMAT FPL 526/10/25] - PANEL SIZING DOUBLE SIDED FOILER

Inventory #29650

NC21 controller.
Extended in-feed fence for placing parts in front of stop cams.
Tiltable in-feed device with 4 inclined driven rollers.
Top pressure: power driven double V-belt.
Continuous variable feed = 5-25 m/min.
Minimum working width = 150 mm.
Max. working width = 2500 mm.
Stop Cams (dog) spacing = 200 mm.
Max. projection height = 25 mm.
2) 2.2 kW 6,000 RPM scoring motors (1 top.
1 bottom) bottom is tiltable up to 90 deg.,. 1) standard profile trimming unit 4.5 kW.
6000 RPM.
Tiltable 90 deg.
Pole-changing switch for rotation direction. max. tool diameter = 200 mm.
1) controlled jump cutting profile trimming unit 4.5 kW.
6000 RPM.
Tiltable 90 deg.
Pole-changing switch for rotation direction. max. tool diameter = 200 mm.
1) profile sanding PS10 unit.
Swiveling - 45° to + 30 deg.
Sanding belt speed 5.5/11m/sec.
Felt sanding pad with quick change device.
1) panel edge blow off cleaning device with suction.
1) preheat station with 2 I.R. lamps for preheating panel edge.
1) hot stamping unit with 2 stamping rollers.
Works with Friz applicators or Voorwood applicator rollers. max. foiling speed 15m/min.
1) foil unwind and rewind station with foil cool down device and end of foil or foil breakage indicator.
1) 400 mm long out-feed transport device.Both side of the machine are equipped the same...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.