Online Catalog - Moulders - Through Feed

Site Languages:

Credit Cards Accepted:

FEATURED PRODUCTS

IIDA [MD 221 F] - 9.5" X 6" (5) HEAD MOULDER (B,R,L,T,B)...

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

[MEASURING STAND] - MLS MEASURING STAND

Inventory #19491

Capacity used to measure radius of cutterheads.
Allows for quick tool changes on moulder.
12" long x 6-1/2" base.
1-1/2" diameter arbor will handle up to 9-1/4" long tool body.
Digital rides up and down for accurate readings.
Specify arbor size...

View Specifications >

		Learn about Machines of Interest to Me >

GABBIANI [GABBIANI/GMC GRS-170NS/9] - MOULDER 10-HEAD 7" X 4" (B,R,R,T,T,T,L,L,U,B)

Inventory #19347

Capacity max. width 170 mm.
10 cutting heads.
Belt feed.
7.5 kW variable speed.
Total draw 95 Amp.
73 kW.
65 kva frequency changer.
Head configuration as follows: bottom.
2 right sides.
3 top heads.
2 left sides.
1 universal.
1 bottom.
Ideal machine for window manufacturing.
This machine was sent back to the original manufacturer in Italy for a total rebuild in 2002 at a cost of $100,000 Canadian...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [U 22AL] - 5-HEAD MOULDER 8"X4" (BRLTB)

Inventory #20767

Capacity 8" x 4".
Spindles bottom 15 HP.
Right 10 HP.
Left 10 HP.
Top 20 HP.
Bottom 15 HP.
All spindles 1 13/16" diameter @ 6,000 RPM.
Jointers on spindles 2-5 manual jointers on left and top spindles.
Hydraulic jointers on left and last bottom...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [AM46] - THROUGH FEED MOULDER 4-HEAD 6" X 4" (B,R,L,T)

Inventory #20555

Capacity 4-Head Profile or "S4S" Moulder (B,R,L,T), 150 mm X 100 mm (6" x 4") height/width, head sequence bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 10 HP, mono-block cast iron bed, all heads have radial and axial adjustments with mechanical digital readouts on important spindle adjustments, all spindles 40 mm diameter at 7,000 RPM, variable feed speed of 20 to 78 FPM, 3 HP feed drive motor, (1) 5-1/2" diameter top, (1) 4" diameter & (1) 3-3/4" diameter bottom powered feed rollers, 4' infeed straightening table with adjustable fence line, chromed bed plates and fence line, control panel, pressure rollers and pressure plate, chipbreaker & full sound enclosure, centralized lubrication system...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [AM58] - MOULDER 5-HEAD 7" X 4" (B, R, L, T, B)

Inventory #20556

Capacity through feed 5-Head (B-R-L-T-B), 7" x 4" width/thickness, head sequence bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, bottom 10 HP, mono-block cast iron bed, all spindles have radial & axial adjustments with mechanical digital readouts, all spindles 40 mm diameter at 7,000 RPM, variable feed speed of 20 - 78 FPM, 4 HP feed drive motor, (1) 5-1/2" diameter top.
(1) 4" diameter & (1) 3-3/4" diameter bottom powered feed rollers, 2 meter (78") infeed straightening table with adjustable fence line, chromed bed plates and fence line, C/W control panel, chipbreaker, central lubrication system and full sound enclosure.
This machine comes C/W manual...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [AM69] - MOULDER 6-HEAD 9" X 6" (B,R,L,T,T,B)

Inventory #20557

Capacity 6-Head (B,R,L,T,T,B), 9" x 6" width/thickness.
Head sequence bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP, bottom 15 HP, mono-block cast iron bed, all heads have radial and axial adjustments with mechanical digital readouts on important spindle adjustments.
All spindles 40 mm diameter at 7,000 RPM.
Variable feed speed of 18 to 75 FPM.
5 HP feed drive motor.
5-1/2" diameter top and three sets of 4" diameter and 3-3/4" diameter bottom powered feed rollers for upgraded feeding performance.
2 HP feed beam elevation motor.
2 meter (6-1/2') infeed straightening table with adjustable fence line, chromed bed plates and fence line.
Centralized control panel & lubrication.
Pressure rollers and pressure plate.
Chipbreakers & full sound enclosure.
This machine comes C/W manual and tools...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT 26 SUPER] - 5 HEAD THROUGH FEED MOULDER

Inventory #21638

Capacity 260 mm (10") x 120 mm (5").
2000 mm infeed table.
4 kW feed motor.
Feed speed 5-24 m/min.
Head arrangment: 5.5 kW bottom.
11 kW right side head.
Left side head.
7.5 kW top.
7.5 kW bottom.
5.5 kW universal head. 40 mm spindle diameter.
6000 RPM spindles.
Digiset...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT P22N] - 5 HEAD MOULDER

Inventory #22410

Capacity 4 3/4" x 8 5/8".
6,000 RPM spindles.
Complete set of cutterheads.
Feed speeds are variable from 16 to 72 FPM.
Digital readouts on each spindle.
Sound enclosure included.
Feed motor 3 HP.
Bottom spindle 10 HP.
Left side head 10 HP.
Right side head 10 HP.
Top spindle 15 HP.
2nd bottom spindle 10 HP...

View Specifications >

		Learn about Machines of Interest to Me >

HER-SAF [DMM-1003] - DENTIL MOULDING MACHINE

Inventory #22596

Capacity material height: 1/2" minimum, 2" maximum.
Material thickness: 3/8" minimum, 7/8" maximum.
Spacing: no minimum, 3" maximum.
Width of cut: (determined by tooling), no minimum, 3/4" maximum.
Depth of horizontal cut: (bottom blade) 3/8" maximum with back blade in place, 1 1/2" maximum when back blade is removed.
Depth of vertical cut: (back blade) 1/2" maximum single cut, 3/8" maximum dual cut.
Average speed: 3 feet/min.
Tooling included: dado set (1/4" to 3/4").
Floor area: 46" x 33".
4" dust outlet.
Requires compressed air supply of 80 lbs minimum...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [U 17 A] - 6 HEAD THROUGH FEED MOULDER (B,R,L,R,T,B)

Inventory #23216

Capacity 6-1/2" x 5".
(6) head through feed moulder.
Cardan drive.
40 mm diameter spindles.
6,000 RPM.
Feed variable 23-63 F.P.M. head sequence: bottom 5.5 kW (7.5 HP), right side 5.5 kW (7.5 HP), left side 7.5 kW (10 HP),,second right side 5.5 kW (7.5 HP).
Top 11 kW (15 HP), second bottom 7.5 kW (10 HP.
Feed motor 5.5 HP.
Has smooth bed plates also has grooved bed plates.
With 31 cutterheads and Weinig feeder...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [AM79F] - MOULDER 7-HEAD 9" X 6" (B,R,L,R,T,T,B) C/W EXTENSIVE PACKAGE OF RECOMMENDED SPARE PARTS

Inventory #23652

Capacity 7-Head (B,R,L,R,T,T,B), 9" x 6" width/thickness.
Head sequence bottom 10 HP, right 10 HP, left 10 HP, right 10 HP, top 15 HP, top 15 HP, bottom 15 HP, mono-block cast iron bed, all heads have radial and axial adjustments with mechanical digital readouts on important spindle adjustments.
All spindles 40 mm diameter at 7,000 RPM.
Variable feed speed of 18 to 75 FPM.
5 HP feed drive motor.
5-1/2" diameter top and three sets of 4" diameter and 3-3/4" diameter bottom powered feed rollers for upgraded feeding performance.
2 HP feed beam elevation motor.
2 meter (6-1/2') infeed straightening table with adjustable fence line, chromed bed plates and fence line.
Centralized control panel & lubrication.
Pressure rollers and pressure plate.
Chipbreakers & full sound enclosure.
This machine comes C/W manual, tools and an extensive package of recommended spare parts...

View Specifications >

		Learn about Machines of Interest to Me >

SILVER [SF 5020 AH] - 200 MM 5 HEADS THROUGHFEED MOULDER B,R,L,T,B

Inventory #24223

Capacity with five heads with the following configuration: Bottom with 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, bottom 10 HP.
Side heads are 40 mm bore x 125 x 125.
Other heads are 200 mm x 125 x 40 mm bore.
The heads to go with machine and there are two extra 150 x 125 x 40 mm they are all straight insert knives 15 mm x 15 mm.
All 6000 RPM.
Cardan drive 20-78 FPM.
Powered feed rolls.
Chrome bed plates with 78" infeed straightening table with adjustable fence.
Centralized control panel and full sound enclosure.
C/W cutterheads.
This machine has less then 200 hours of production...

View Specifications >

		Learn about Machines of Interest to Me >

SCM [TOPSET 23] - 7 HEAD THROUGH FEED MOULDER (B,R,L,T,T,B,U)

Inventory #24281

Capacity 7-Head.
9" x 6-1/4" cap.
LED digital readouts of working width and height.
5/8" min. part width.
22" min. part length. - Head sequence: Bottom 12 HP with reference engraver.
Right 12 HP.
Left 12 HP.
Top 18 HP.
Top 12 HP.
Bottom 12 HP.
Universal 12 HP motor.
All spindles 1-13/16" diameter @ 6,000 RPM with automatic brakes.
Mechanical digital readouts on all spindle adjustments except the 1st bottom spindle.
"SET-UP" Rapid setting system of top and left spindles for different tool diameter .
Motorized feed beam with simultaneous or independent adjustment of top spindles.
Feed System: Carden (chainless) gear drive feed.
(15) air loaded holddown/feed wheels with (9) pressure zones.
Variable feed speed 19 - 117 FPM.
7.5 HP feed motor with static inverter and brake.
(4) Air loaded infeed holddown wheels with on/off switch.
Air loaded receding chip breakers and rear pressure shoes on top heads.
Automatic bed lubrication.
78" infeed straightening table with adjustable fence and side pressure roll; hand held remote for setup.
Sound proof safety enclosure with lights and interlock.
Comes with a UTMA grinder for making the custom profile knives for cutterheads.
This description may be cited from documentation at the time the equipment was new and my not reflect the actual equipment, inspection is recommended...

View Specifications >

		Learn about Machines of Interest to Me >

WADKIN [FDR] - 7 HEAD THROUGH FEED MOULDER (B,T,R,L,T,T,B)

Inventory #24882

Capacity belt drive 1st bottom & first top heads 15 HP.
Side heads direct drive 16 HP motors top & bottom heads 20 HP direct drive Head Sequence: bottom, top, fence side, near side, 2nd top, 3rd top, 2nd bottom.
Pneumatic top pressures to all rolls.
Yellow fiberglass sound enclosure.
Machine is C/W Ziwo model CL-11 random length hopper, in 2008 a new control was built for the machine at a cost of $25,000 to control the speed on each spindle individually by inverters (see picture).
Machine is ideal for MDF mouldings and C/W a set of Hydro Lock Tooling.
Feed speed from 20 to 125 feet/min.
All spindles are 30 mm diameter.
135 mm x 85 mm material...

View Specifications >

		Learn about Machines of Interest to Me >

SCMI [SUPERSET 23] - 5 HEAD MOULDER (B, R, L, T, B)

Inventory #25066

Capacity 9" x 5".
(5) head, bottom 12 HP, right/left 18 HP, top 12 HP, bottom 12 HP.
1 13/16" diameter spindles.
Variabale feed drive system.
Pneumatic chip breakers.
Digital readouts...

View Specifications >

		Learn about Machines of Interest to Me >

IIDA [MD 221 F] - 9.5" X 6" (5) HEAD MOULDER (B,R,L,T,B)

Inventory #25071

Capacity 9.5" x 6".
1st bottom 10 HP, 2nd right 10 HP, 3rd left 10 HP, 4th top 15 HP, 5th bottom 10 HP.
Spindle diameter 1 13/16".
Mechanical digital readouts.
Variable speed drive 15-72 FPM.
Cutter head speed 6000 RPM.
Feed, 7 individual direct drive motors, 3 bed rollers.
Power raise and lower beam.
Approximately 1750 hours.
Price includes loading...

View Specifications >

		Learn about Machines of Interest to Me >

EXTREMA [XM-695] - 6 HEAD MOULDER (B,R,L,T,T,B)

Inventory #25637

Capacity 9" wide, 5" tall.
6 Heads - 1st Bottom 7 1/2 HP.
2nd Right 7 1/2 HP.
3rd Left 10 HP.
4th Top 10 HP.
5th Top 10 HP.
6th Bottom 10 HP.
40 mm spindle.
5 HP variable feed speed.
240 mm infeed table.
40 mm spindles...

View Specifications >

		Learn about Machines of Interest to Me >

WADKIN [K23] - 6 HEAD, 9" - 40 MM SPINDLE THROUGH FEED MOULDER (B,R,L,T,T,B)

Inventory #25819

Capacity maximum infeed 9 1/2" x 5.5" (240 mm x 140 mm).
Maximum outfeed capacity 9" x 4-3/4" (230 mm x 120 mm), with 125 mm diameter cutting circles.
Minimum finished section 1/2" x 1/4"(15 mm x 6 mm).
Vertical spindle adjustment to side heads 2 1/2" (60 mm).
Axial spindle adjustment to horizontal 1-1/2" (40 mm).
Feed speed 18-72 f/min. (6-22 m/min.).
Head sequence 1st Bottom head 10 HP (7.5 kw).
Fence Side head 20 HP (15 kw).
Near side head, side heads shared, 1st Top head 15 HP (11 kw) , 2nd Top head 15 HP (11 kw), 2nd Bottom head 15 HP (11 kw).
Cutting circles, 1st Bottom head 5" (125 mm) diameter .
Fence Side head 7-7/8" (200 mm) diameter .
Near Side head 7-7/8" (200 mm) diameter .
Top heads 8-1/4" (210 mm) diameter .
Second bottom head 7-7/8" (200 mm) diameter .
Splitting capacity on second bottom head 2" (50 mm) diameter (with 8" diameter saws).
Also including misc. chip breaker shoes in addition to those on the machine.
Misc. spindle spacers.
Misc. feed rolls with spacers...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT P22N] - 220MM (8.66") - 5 HEAD (B-L-R-T-B) THROUGH FEED MOULDER

Inventory #25816

Capacity max. width 8.66" (222 mm).
Thickness 4.7" (120 mm).
Spindle diameter 40 mm.
Spindle RPM 6,000.
Head configuration, 1st bottom 10 HP, sides (R and N) 10 HP, top 10 HP, 2nd bottom 10 HP.
Feed motor 3 HP.
460 Volt transformer add an additional $925.00...

View Specifications >

		Learn about Machines of Interest to Me >

SCM [SUPERSET XL CABINET WIZZARD] - 9" 5 HEAD AUTOMATIC THROUGHFEED MOULDER (B,R,L,T,B)

Inventory #25809

Capacity 5 Head Automatic throughfeed moulder with control 20.
Position 1- planer spindle 12 HP.
Position 2 -right vertical spindle 9 HP.
Position 3-Left vertical spindle 9 HP.
Position 4- top horizontal spindle 18 HP.
Position 5- bottom horizontal spindle 12 HP.
Feed 6 HP, Feed speed 6 to 36 M/min.
6000 RPM Spindles.
Spindle diameter 1-13/16".
Stacked tooling possible on vertical spindles with 3.125" axial adjustment.
9" (230 mm) Width...

View Specifications >

		Learn about Machines of Interest to Me >

WADKIN [XJ220] - 8 HEAD - 1 13/16" SPINDLE - THROUGH FEED MOULDER (B-R-L-R-T-T-B-U)

Inventory #25903

Capacity 8 heads.
Bottom 10 HP.
Right 7.5 HP.
Left 15 HP.
Right 10 HP.
Top 15 HP.
Top 15 HP.
Bottom 15 HP.
Universal 10 HP.
Sawing head 3/4 HP.
7500 RPM spindle speed.
1 13/16" spindle diameter.
Through feed with heavy duty feed works with 7 1/4" diameter infeed rolls.
Hydro-lock outboard bearings on all horizontal spindles.
Digital Siko counters.
Variable speed 15-120 FPM.
10 HP feed motor.
Power raise / lower on feed beam.
Reconditioned in 2005 and not put in service since.
On skids and ready to ship...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [HYDROMAT H22BL] - 220 X. 120 MM 8 SPINDLE THOUGH FEED MOULDER (B,R,L,R,T,B,T,B)

Inventory #26079

Capacity 220 mm x 120 mm.
8 spindles (bottom, right, left, right, top, bottom, top, bottom).
Cardan drive.
Pneumatic pressure.
Variable speed.
7th and 8th spindles with counter supports and jointers.
Total power 85 kW...

View Specifications >

		Learn about Machines of Interest to Me >

SCM [LOGIC23] - 230 X. 120 MM 5 SPINDLE THOUGH FEED MOULDER (B,R,L,T,U)

Inventory #26082

Capacity 230 mm x 120 mm.
5 spindles (bottom, right, left, top, universal).
Cardan drive.
Pneumatic pressure.
Variable speed.
Top roller before 1st spindle.
Electronic programmer of 2 axis (width, height)...

View Specifications >

		Learn about Machines of Interest to Me >

SCMI [SUPER SET 23] - 9" X 4-3/4" 5 HEAD THROUGH FEED MOULDER (B,R,L,T,B)

Inventory #26150

Capacity Hopper feed approx 9 x 4-3/4.
Bottom head 12 HP.
Right side & left side heads 12 HP.
Top head approx 12 HP.
Bottom head 12 HP.
3 HP Feed motor.
Variable 0 to 100 FPM.
Digital scale Carden drive feed work.
Digital read-out on all head movements except for first bottom head.
Pneumatic chip breaker.
Electronic control cabinet.
All spindles are 1-13/16" diameter.
Sound enclosure.
Model B oiler.
Replaced bearings, Cam, Limit switch, Position indicator, potentiometer, Connecting rod and head, Cable timer, Roller case, seals, Gaskets, Belt, Pressure switch , Gear, Pushbuttom, Pressure wheel and spacers, Plate, Cam, Toothed ring, Includes two new 6" long heads & two new 2" heads.
Currently wired for 440...

View Specifications >

		Learn about Machines of Interest to Me >

LINARES [CONCEPT DL3006] - 9" X 5" HEAVY DUTY 5- HEAD MOULDER (B,R,L,T,B)

Inventory #26149

Capacity 9" x 5".
Adjustable infeed table & fence 78".
1-13/16" Diameter spindles.
Head configuration: bottom 10 HP, Right 10 HP, Left 10 HP, Top 20 HP, Bottom 15 HP.
Spindle speed is 7200 RPM.
Feed motor 5.5 HP.
Feed speeds infinitely variable 16 to 115 FPM.
Chromed bed plates & fences.
Automatic lubrication on feed table for smooth feeding of stock.
Hand crank adjustment with digital readouts...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT 23E] - FIVE HEAD MOULDER,(B,R,L,T,B)

Inventory #26260

Capacity 9" x 5".
Adjustable infeed table & fence 78".
1-1/2" Diameter spindles.
Head configuration: bottom 10 HP, Right/left: 15 HP, Top 15 HP, Bottom: 10 HP.
Spindle speed is 6000 RPM.
Feed motor 3 HP.
Feed speeds infinitely variable 18-72 FPM.
Includes dust manifold.
New in 1996...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [H22BL] - 9" X 5" 8-HEAD HIGH SPEED MOULDER (B,R,L,R,L,T,T,B)

Inventory #26264

Capacity 9" x 5".
Bottom head: 15 HP, Right head 15 HP, Left head 15 HP, Right head 15 HP, Left head 15 HP, Top head 20 HP, Top head 20 HP, Bottom head 15 HP.
Feed motor 25 HP.
Hydraulic unit.
Feed speeds 20 to 200 FPM.
Outboard bearings horizontal spindles Straight knife jointers on head numbers 2, 3, 6, 8.
Profile jointer on head numbers 4, 5, 7. digital readouts.
Groved bed.
Short infeed table.
1-13/16" Diameter spindles.
Spindle speed 6,000...

View Specifications >

		Learn about Machines of Interest to Me >

SCM [SINTEX] - 4 HEAD MOULDER (B,R,L,T)

Inventory #26277

Capacity 12 HP Top & bottom horizontal spindle motor.
9 HP Right and left vertical spindle motor.
Simultaneous adjustment of feeding system & top horizontal spindle for quick & accurate set-up.
Numerical readout indicators.
Left vertical spindle with front presser & outfeed fence.
Full guard enclosure with safety microswitch.
Front feeding group (before surfacer) with two serrated feed rollers.
4 Hardened steel serrated feed rollers before top horizontal.
Rubber coated feed rollers after top horizontal.
Mechanical pressure on feed groups.
2 Speed feed system, Forward feed selecter switch & jogging button.
Emergency shut down push button.
Padlock main switch.
Auxiliary low Voltage circut.
Min./max. finished workpiece: 7/8" x 1/4"/ 7" x 4.12".
Min. length of stock 11-7/8".
Min. length of stock butt feed 10".
Reference engraver 120 mm.
Feed motor 1.2 / 1.8 HP.
Feed rate 19 & 38 FPM.
Infeed table length 66.9...

View Specifications >

		Learn about Machines of Interest to Me >

LOBO [MB4023X6] - 6 HEAD - 9" (B-R-L-T-T-B) THROUGH FEED MOULDER

Inventory #26364

Capacity 6 head.
9" working width.
Spindle diameter is 1 1/2".
Bottom 7 HP, Right 7 HP, Left 7 HP, Top 10 HP, Top 10 HP, Bottom 10 HP.
Needs knobs replaced and new set of rubber feed rollers...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [H23C] - 9"X 5" 6 HEAD HIGH SPEED MOULDER (B,R,L,T,T,B)

Inventory #26465

Capacity 9" x 5".
Head sequence: bottom 15 HP, Right 20 HP, Left 15 HP, Top 25 HP, Top 25 HP, Bottom 25 HP.
4' Infeed table.
2-1/8" Diameter spindles at 6000 RPM.
Variable feed speeds of 10 to 200 FPM.
"Digi-set" for left & both top spindles.
Outboard bearings for spindles 4, 5, 6.
Free standing control pedestal...

View Specifications >

		Learn about Machines of Interest to Me >

IIDA [MC 251-6] - 9" X 4" 6 HEAD FEED THROUGH MOULDER (B,R,L,T,T,B)

Inventory #26619

Capacity Feed speed range 16-80 FPM.
Max.
Planing Capacity 9-21/32" W x 4- 15/16' H.
Min.
Planing Capacity 13/16" W x 7/16" H.
Spindle Rotation 6000 RPM.
Spindle Diameter 1-13/16".
Max.
Between Feed Rollers 20-1/4".
Axial adjustment 3/4".
Head configuration: #1 jointer bottom head 10 HP, #2 right vertical 10 HP, #3 left vertical 15 HP, #4 top horizontal head 15 HP, #5 top horizontal 20 HP, #6 bottom horizontal 10 HP.
Feed rollers 7- 1/2 HP, Bottom Feed Roller 1/4 HP.
Hold Down Beam R/L 1/2 HP...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 23E] - 6 HEAD (B,R,L,T,T,B) THROUGH FEED MOULDER

Inventory #26675

Capacity 1-1/2" Spindles.
Central lubrication.
Head sequence: Bottom 10 HP, Right 15 HP, Left 15 HP, Top 15 HP, Top 15 HP, Bottom 10 HP...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 500] - 5 HEAD (B,R,L,T,B) THROUGH FEED MOULDER

Inventory #26714

Capacity Feed speeds 20 - 100 FPM.
1-1/2" Spindle diameter.
Head sequence bottom 10 HP.
Right & Left 10 HP, Top 15 HP.
Bottom 10 HP.
Electronic digiset on left & top spindles.
Didital readouts.
Motorized servo positioning.
Manual waxlit.
Receding chip breaker on top spindle.
Full set of tooling.
Manuals.
Measuring tool stand & Nordfab quick-fit dust.
Collection manifold and piping...

View Specifications >

		Learn about Machines of Interest to Me >

WADKIN [XE 220/6U] - 7 HEAD THROUGH FEED MOULDER (B,F,N,T,T,B,U)

Inventory #26846

Capacity 9" x 5".
Head sequence bottom 15 HP, fence 15 HP, near side 15 HP, top 20 HP, top 30 HP, bottomm 25 HP, universal 10 HP.
Spindle speed to first bottom, first top and universal 6000 RPM.
Spindle speeds to second top, second bottom, fence and near side 4500/9000 RPM.
Mechanical digital readouts.
Profile cartridge straight and profile built-in jointer with micrometer adjustment to fence side head, near side head,,1st top head, 2nd top head, 2nd bottom head.
Top heads have electrically operated hydro-pneumatic locks to vertical movement.
Hydrogrip outboard bearings steady to 1st bottom head, all other horizontal heads have hydrogrip outboard bearings allowing axial adjustment while pressurized.
Four position universal head for working in top or bottom horizontal positions or intermediate, including fence side or near side positions (tilts to +/- 15°s in fence side position).
40 mm spindles.
2 meter long infeed straighting table and fence,feed speed infinitely variable to 200 fpm from 15 HP motor...

View Specifications >

		Learn about Machines of Interest to Me >

MATTISON [226] - 5 HEAD (R,L,T,T,B) FEED THROUGH MOULDER

Inventory #26855

Capacity 12" Wide capacity.
Side Heads: 25 HP, 36.4/18.2 Amps.
1st Top: 15 HP, 58.29 Amp, 2nd Top: 25 HP, 58/29 Amp, Bottom: 25 HP, 58/29 Amp.
Feed Motor: 15 HP, 49.3/24.6 Amp.
Variable speed gear box 18-155'/min.
Includes box of cutter heads, Tools, And frequency inverter.
1-13/16" Spindles...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [AM69] - MOLDURADORA 6 CABEZALES 9"X 6" (230 X 150MM)

Inventory #27298

Capacidad 6 Cabezales, 9" x 6" anchura/grosor.
Sequencia de cabezales, abajo 10 HP, derecha 10 HP, izquerda 10 HP, arriba 10 HP, arriba 15 HP abajo 15 HP, cama mono bloque en fierro fundido, todos los cabezales poseen un ajuste radial y axial con lectura digital mecánica en importantes ejes de ajuste,Todos los ejes de 40 mm de diametro a 7000 RPM.
Alimentación de velocidad variable de 18 a 75 pies por minuto.
Motor de alimentación 5 HP.
5-1/2 diametro superior y tres series de 4"diametro y 3-3/4 diametro rodillos inferiores para un rendimiento de alimentación mejorada.
Viga alimentadora de preción superior, de elevación del motor 2 HP.
2 metros ( 6-1/2') meza de entrada enderezadora con linea guia ajustable, placa de cama y guia de ajuste cromadas.
Panel de control & lubricación centralizado.
Rodillos y placas de preción.
Protector de astillas y aserrín hacia los motores, y caja de sonido completo.
Esta maquina viene con manuales y herramientas...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG - 5 HEAD 6 3/4" B-R-L-T-B THROUGH FEED MOULDER

Inventory #27609

Capacity 5 head.
6 3/4" x 4/34" max. capacity.
Bottom 7.5 HP, Right 7.5 HP, Left 7.5 HP, Top 15 HP.
Bottom 10 HP.
1 1/2" spindle diameter .
Cutterhead speed 8,000 RPM.
Air loaded feed rollers, motorized feed beam, Cardan (chainless) feed drive.
Receding chip breaker on the top head, 1 non-powered bed roll.
And a reverse feed...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [POWERMAT 1000] - 260 X 130 MM THROUGH FEED MOULDER 8 HEAD (B,R,L,R,T,T,B,U)

Inventory #27623

Capacity Feed speed 6 - 36 m/min.
Feed 4 kW electronically frequency-regularly.
Pneumatic pressure before straightening spindle.
Pneumatic high low adjustment for feed.
1st spindle bottom, motor 5.5 kW, Spindle number of revolutions 12000 RPM.
2nd spindle right, motor 7.5 kW, Spindle number of revolutions 12000 RPM.
3rd spindle left, motor 7.5 kW, Spindle number of revolutions 12000 RPM.
4th spindle right, motor 7.5 kW, Spindle number of revolutions 12000 RPM.
5th spindle top, motor 7.5 kW, Spindle number of revolutions 12000 RPM.
6th spindle top, motor 7.5 kW, Spindle number of revolutions 12000 RPM.
7th spindle bottom, motor 7.5 kW, Spindle number of revolutions 12000 RPM.
8th spindle universal, motor 7.5 kW, Spindle number of revolutions 8000 RPM.
Surface table, adding ruler with 2,0 m.
Driven. table roller before the 1st spindle top.
Driven. table roller between 1st and 2nd stands.
Machine table.
Chromium plating thinly.
Waxilit pump...

View Specifications >

		Learn about Machines of Interest to Me >

IIDA [MH221 CII] - CNC 9" X 4-3/4" 8 HEAD SIDE MATCHER/ MOULDER

Inventory #26871

Capacity 9" x 4-3/4".
Configuration: bottom, Top, Right/left (opposed), Top, Bottom.
Outboard bearings on horizontal spindles.
2-1/8" Diameter spindles.
6000 RPM Spindle speeds.
Two (2) 11 kW Feed Motors.
32" Long Infeed table with two (2) Feed driven bed rollers.
CNC Motorized head positioning.
1 HP Motor for vertical adjustment of Upper beam.
First bottom: 15 kW.
First top: 22 kW.
Second bottom: 18.5 kW.
First left: 11 kW.
First right: 11 kW.
Second top: 18.5 kW.
Second right: 11 kW...

View Specifications >

		Learn about Machines of Interest to Me >

HIGH POINT [HPS-423] - 9" 4-HEAD FEED THROUGH MOULDER (B,R,L,T)

Inventory #27877

Capacity 4-head (B-R-L-T) 9" x 4" moulder.
Profiling depth at 1/8".
Head sequence: Bottom spindle 7.5 HP,,right & left shared 10 HP motor and top spindle 7.5 HP.
Spindle diameter 40 mm with cutter head speed of 6000 RPM.
Spindles equipped with mechanical digital readouts.
3 HP feed motor with variable feed speed.
Cardan shaft drive to feed works.
6' Infeed table with lateral side pressure roller mounted at table infeed.
(1) top and (1) bottom insert planning head.
Operator and spare parts manuals.
Electrical panel meets UL/CSA requirements...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [POWERMAT 1000] - 6 HEAD THROUGH FEED MOULDER

Inventory #27879

6 head.
With powerlock .
1st head 1-13/16" spindle 8000 RPM.
2-6 are powerlock 12000 RPM.
1st head bottom 15 HP.
2nd right 15 HP.
3rd left 15 HP.
4th top 30 HP.
5th top 40 HP.
6th bottom 30 HP.
Motorized spindle positioning.
20-120 fpm.
Powercom touch screen control.
Operator powercom pendent is stand alone and swing arm floor mounted.
Special factory option.
Approx 1600 hrs on the machine...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT22N] - 4 SIDED MOULDER, (B,R,L,T)

Inventory #27691

Capacity 8-5/8" x 4-3/4".
1-1/2" Spindle diameter, 6000 RPM.
3 HP Feed speed, 18 tp 78 FPM.
Head sequence 10 HP Motor botom, Left, Right, 15 HP Top.
In working condition.
Weinig ATS Program for positioning of left and top...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 23E] - 7 HEAD THROUGH FEED MOULDER (B,R,L,T,T,B,U)

Inventory #28017

Capacity max. working width 230 mm, max. working height 120 mm.
SIKO visual device to easely regulate the shafts.
7 heads.
Head sequences 4 kW Bottom horizontal spindle, 4 kW Right vertical spindle, 5.5 kW Left vertical spindle, 5.5 kW Top horizontal spindle, 5.5 kW Top horizontal spindle, 4 kW Bottom horizontal spindle, 7.5 kW Universal spindle.
Feeding system through cardan joints - motor power 5,5 kW.
Bottom motorized rollers inserted on the work table.
Top pression made by: - top motorized grooved wheels - top motorized rubbered wheels.
Top pression unit with adjustable height.
Adjusting in continuos speed with regulation by motovariator 6/36 m/min.
Extension length of the work table in entry - length 2.000 mm.
Input panel guide in entry.
Automatic system to load the piece installed on the table WEINIG EM.
Command board installed on an incorporated electrical cabinet to control the machine.
Security norme CE mark.
Safety and sound-proof enclosure cabinet of the working units.
Exhaust system on the top part of the safety enclosure cabinet.
Total installed power 41.5 kW...

View Specifications >

		Learn about Machines of Interest to Me >

SCMI [COMPACT 23] - 4 HEAD (B,R,L,T) FEED THROUGH MOULDER

Inventory #28075

Capacity 4 Head.
Head sequence: bottom 5.5 HP, Right/left 7.5 HP, Top 5.5 HP.
Spindle diameter 40 mm.
Good amount of tooling.
Digital set up gauge.
6,000 RPM Spindle speed.
1.8 HP Variable speed feed 13 to 72 FPM...

View Specifications >

		Learn about Machines of Interest to Me >

EXTREMA [BL5-23 BLAZER] - 5 HEAD, 9" THROUGH FEED MOULDER (B,R,L,T,B)

Inventory #28149

Capacity 9" x 5".
(5) heads, Bottom 10 HP, left 7.5 HP, right 7.5 HP, top 15 HP, 2nd bottom 10 HP.
5H P feed motor, 2 HP elevation motor.
1 13/15" spindle size.
7200 RPM.
Carden shaft drive system, digital readouts at each spindle, replaceable chrome bed plates.
Short stock hold down, powered rear bed roller, adjustable pneumatic hold downs...

View Specifications >

		Learn about Machines of Interest to Me >

EXTREMA [PI6-23 PIONEER] - 6 HEAD - 9" THROUGH FEED MOULDER

Inventory #28150

Capacity 9" x 5".
(6) head, bottom 10 HP, left 10 HP, right 7.5 HP, top 15 HP, 2nd top 15 HP, 2nd bottom 10 HP.
7.5 HP feed motor, 1 HP elevaction motor.
1 13/16" spindle size.
Carden shaft drive system, digital readouts at each spindle, replaceable chrome bed plates.
Short stock hold down, powered rear bed roller, adjustable pneumatic hold downs...

View Specifications >

		Learn about Machines of Interest to Me >

EXTREMA [SP4-23] - 4 HEAD 9" THROUGH FEED MOULDER

Inventory #28147

Capacity 9" x 5".
(4) head - bottom 7.5 HP, left/right shared 15 HP, top 10 HP motor.
3 HP feed motor, 1/2 HP elevation motor.
Spindle size 1 13/15".
Carden shaft drive system, digital readouts at each spindle, replaceable chrome bed plates.
Powered rear bed roller, short stock hold down...

View Specifications >

		Learn about Machines of Interest to Me >

EXTREMA [SP5-23 SPRINTER] - 5 HEAD - 9" THROUGH FEED MOULDER (B,L,R,T,B)

Inventory #28148

Capacity 9" x 5".
(5) heads, botom 7.5 HP, left and right heads shared 15 HP, top 10 HP, 2nd bottom head 10 HP.
Variable 20-75 fpm feed speed.
5 HP feed motor, 2 HP elevation motor.
1 13/16" spindle size.
Carden shaft drive system, digital readouts at each spindle, replaceable chrome bed plates.
Powered rear bed roller, short stock hold down.
Heat treated cast iron base, adjustable pneumatic hold downs...

View Specifications >

		Learn about Machines of Interest to Me >

LEADERMAC [LMC-623H] - 9" 6-HEAD HIGH SPEED THROUGH FEED MOULDER (B,F,N,T,T,B)

Inventory #28180

Capacity 9" x 6".
High Speed Moulder.
1 piece cast iron frame.
8" min. length.
3.2" axial adjustment on side heads.
1.6" axial adjustment on Top/bottom heads.
6 heads (Bottom 15 HP, Fence Side 15 HP, Near Side 15 HP, top 25 HP.
Top 20 HP, bottom 20 H.P).
Outboard bearing on 2 top and last bottom Horizontal heads.
50 mm spindles.
1st bottom head is 6,000 RPM, all other heads are 7200 RPM.
Feed Speeds of 20-150 FPM.
Heavy Duty Infeed Rolls with feed motor of 10 HP.
Pneumatic Profile Jointers on 2 side heads and 2nd top.
Straight Jointers of 1st top and 2nd Bottom.
Totally Electronic DC Brakes (U.S.
Make).
31.5" short infeed table.
12 top driven rollers.
5 bottom driven rollers.
1 plain midfeed idle bed roller.
Automatic bed lubrication.
Centralized Lubrication.
Motorized tops and near side head with REC-705B Quik-TrueSet Electronic set systems.
Mobile Control console.
Swing on 1st bottom head 4.9" - 7.1", Swing on side heads 4.4" to 10", Swing on 2 tops and 2nd Bottom 3.9"-10...

View Specifications >

		Learn about Machines of Interest to Me >

SCM [COMPACT 23] - 5 HEAD THROUGH FEED MOULDER 9" CAP.

Inventory #28192

Capacity 9-1/16" x 4-15/16" opening.
Head sequence, bottom 7.5 HP, right and left share 15 HP, top 10 HP, bottom 10 HP.
40 mm spindles.
Mechanical digital readouts.
Feed speed 13-72 fpm.
Will require some mechanical work before putting into production...

View Specifications >

		Learn about Machines of Interest to Me >

LEADERMAC [LMC-623C] - SIX HEAD MOULDER (B,R,L,T,T,B)

Inventory #28199

Capacity 0.6" to 9" W x 0.4" to 6" thickness.
0.6" to 9" Width x 0.4" to 6" thickness.
Bottom 10 HP, Right side 10 HP, Left side 15 HP, Top 20 HP, Top 15 HP, Bottom 20 HP.
Spindle diameter 1-13/16", Spindle speed 6000 RPM.
Mechanical digital position readouts on spindles 2, 3, 4, 5 and 6 for vertical positioning.
Tables, Bedplates, Chipbreakers.
And Fences are Hard Chromed.
Short stock feeding roll at right side head.
Sectional chipbreakers before top heads with mechanical digital Readouts.
Pad pressure (Pressure Plates) after top heads heads with vertical screw adjustment and mechanical digital position readouts standard digital counters on top head chipbreaker and pressure plate automatic bed lubrication.
Central lubrication greasing of all critical points from central location.
Moulder heads with machine one 9" spiral insert for 1st bottom, Three 9" four knife, Two 6" four knife, One 4" insert.
Two 3" insert.
One 1" insert...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT 26 SUPER] - 10" 5-HEAD THROUGH FEED MOULDER (B,R,L,T,B)

Inventory #28209

Capacity 260 mm (10") x 120 mm (5").
2000 mm infeed table.
4 kW feed motor.
Feed speed 5-24 m/min.
Head arrangment: 5.5 kW bottom, 11 kW right side head and left side head, 7.5 kW top, 7.5 kW bottom.
40 mm spindle diameter.
6000 RPM spindles.
Digiset.
Very few hours of use in small shop...

View Specifications >

		Learn about Machines of Interest to Me >

LOBO [SM-236C] - 9" 6-HEAD THROUGH FEED MOULDER (B,R,L,T,T,B)

Inventory #28210

Capacity max. working width 9", min. working width 3/4".
Max. working thickness 4-3/4", min. working thickness 5/16".
Head sequence bottom 10 HP, right side 10 HP, left side 10 HP, top 15 HP, top 15 HP, bottom 15 HP.
Feed motor 7-1/2 HP.
Elevation motor 1-1/2 HP.
Spindle diameter 40 mm.
Cutter speed 6500 RPM.
Variable feed speeds 16 to 82 fpm.
Pneumatic air 90 PSI 5 CFM.
Dust outlets 5 x 5".
Each spindle has mechanical digital readouts...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [H23] - 6-HEAD THROUGH FEED MOULDER, (B,R,L,T,T,B)

Inventory #28276

Capacity feed speed 0-60 meters/min.
1st bottom head 11 kW, straight knife jointer.
2nd fence side head 11 kW, knife and profile jointer.
3rd near side head 11 kW, straight knife and profile jointer.
1st top head 15 kW, straight knife jointer.
2nd top head 15 kW, profile jointer.
2nd Bottom head 15 kW available for splitting.
It has handling equipment with it : cross transfer and loader...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [H23] - 6-HEAD THROUGH FEED MOULDER, (B,R,L,T,T,B)

Inventory #28275

Capacity 230 x 125 mm.
Head configuration and HP: Bottom 10 HP, Fence side vertical 10 HP, Offside vertical 10 HP, Top Horizontal 15 HP, Second top Horizontal 15 HP,Second bottom head 15 HP,Feed motor power 10 HP.
Spindle speeds 8000 RPM.
Feed speed 6-36 m/min.
Mechanical digital readouts on all spindles.
(short) infeed table with two driven rollers above the table.
Two serrated driven bed rollers in the table before the first bottom head.
Three driven bed rollers in the machine table.
Pneumatic side pressure roller before the infeed rolls.
Full safety and sound enclosure around complete machine.
Electric lock- out to stop machine when doors are opened.
Full Cardan/chainless drive system.
Pneumatic pressure to all top feed rollers.
10 HP variable speed feed works.
Interior lighting Comes with set 4 planer cutter blocks...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [PROFIMAT 22N] - 5 HEAD (B-R-L-T-B) MOULDER WITH PLC AND JOINTING INFEED TABLE

Inventory #28556

Capacity 8-5/8" x 4-3/4".
5 Head (B-R-L-T-B), Bottom 10 HP, Right and left 10 HP, Top 15 HP, 10 HP Bottom.
Spindle diameter 1-1/2", Spindle speed 6000 RPM.
PLC Which automatically positions top and side heads "ATS".
3 HP Feed motor with speeds of 18 - 78 RPM.
Includes manuals, Set-up tools, 18 Moulder heads and 620 sets of knives.
Not been used for continuous heavy production...

View Specifications >

		Learn about Machines of Interest to Me >

SCMI [COMPACT XL] - 5 HEAD (B,R,L,T,B) FEED THROUGH MOULDER

Inventory #28686

Capacity 5 Head (B,R,L,T,B) 9-1/16" X 4-3/4".
Head sequence bottom 9 HP.
Right/left shared 12 HP.
Top 18 HP and bottom 9 HP motors, All motors have mechanical brakes.
40 mm Spindle diameters.
6,000 RPM cutter head speed, Spindles equipped with mechanical digital readouts for height and width adjustments.
Digital readout for chipbreader and pressure element top spindle 2 HP Variable feed drive motor.
13 -78 FPM feed speeds.
6' - 6" Infeed straightening table.
Includes central lube.
Manual waxlit pump.
Manual and wrenches...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [AL 22 HYDROMAT] - 5 HEAD B,R,L,T,B FEED THROUGH WOOD MOULDER

Inventory #28578

Capacity 5 Head.
BRLTB.
Bottom 15 HP, Right 15 HP, Left 15 HP, 15 HP Top, 20 HP Bottom.
15 HP Carden feed drive.
10 HP Manual Waxlift pump.
Pneumatically pressureized feed rolls.
Idle rollers in machine bed.
Capabilities 8-5/8"W x 4-3/4"H.
18' to 120" FPM Feed speeds.
115V Air requirements.
Great machine.
All spindles 2-1/8" diameter.
Centralized motorized adjustment of top spindle.
6,000 RPM Cutterhead speed.
Machanical digital readouts on all spindles.
Manual jointers on left and top heads, Hydraulic jointers on right and bottom heads.
1600 Hrs on meter...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [U17A] - 7"X 4" 7 HEAD (BRLRTBU) THROUGH FEED MOULDER

Inventory #28796

Capacity 7" x 4".
All heads 20 HP.
7 Head, Bottom, Right, Left.
Right, Top, Bottom, Universal.
Includes 13 Cutterheads...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [Q23P] - 4 HEAD (B,R,L,T) 9" X 4" MOULDER

Inventory #29098

Capacity 9-1/16" x 4-3/4".
4 Head.
Head sequence bottom 7.5 HP, Right and left 10 HP, Top 15 HP.
1-1/2" Diameter spindles with cutterhead speed od 6000 RPM.
26 FPM Feed speed, 1 HP Direct drive.
2 m (6'6") Infeed table with adjustable fence.
Includes tools, Manuals, Holddowns.
Under power...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT GOLD] - 9" X 5-3/4" 5 HEAD BRLTB MOULDER

Inventory #29230

Capacity 9"W x 5-3/4"H.
40 mm Spindle.
6-30 m/min.
Feed speed.
5 Head sequence, Bottom 15 HP, Right 10 HP, 10 HP Left, 15 HP Top, Bottom 15 HP.
30 PSI.
Under power.
Includes tool box, Cutter scale.
Head scale.
3 Tubes of grease with gun, Dust collection manifold, (2) 2" Cutter heads, (2) 4" Cutter heads, (2) 6" Cutter heads, (2) 9" Cutter heads, (1) 6" Spiral cutter head, (1) 9" Cutter head, 4 Sets of 2" straight cutters, 4 Sets of 4" straight cutters, (4) Sets of 6" straight cutters, 4 Sets of 9" straight cutters, Various spindle spacers, Work power feed rollers, (2) 2", (2) 1", (2) 3/4...

View Specifications >

		Learn about Machines of Interest to Me >

LEADERMAC [623 LMC PLATINUM 6-HEAD] - 6 HEAD BRLTTB THROUGH FEED MOULDER WITH DUST COLLECTOR

Inventory #29288

Capacity 9-1/16" x 6".
6 Head Moulder, BRLTTB.
Head sequence 1 st Head 15 HP Bottom, 10 HP Right, 15 HP Left, 20 HP Top, 15 HP Top, 20 HP Bottom.
1-13/16" Spindle diameter with cutterhead speed of 7200 RPM.
Mechanical readouts for pressure elements and chipbreakers.
Inverter driven 7.5 HP feed system with feed speeds of 20 to 100 FPM.
Package includes Moulder, Out-feed conveyor, 20 Assorted heads, Miscellaneous moulder accessories, Many Knives and storage bins (many WM profiles), MAC Dust Collection, Duct work, Dust collection conveyor, Return air ducts and silencer.
Dust collector bags have all been cleaned and it is ready for use.
A-frame racking for moulding storage...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 30 EL] - 300 MM (12") 5 SPINDLE THROUGH FEED MOULDER (B,R,L,T,B)

Inventory #29297

Capacity 300 mm working width.
5 spindles B R L T B.
Horizontal spindles are 2-1/8" diameter, Vertical spindles are 1-13/16" diameter, Outboard bearings for horizontal spindles.
Wax lit pump automatic Pneumatic receding chipbreaker in front of top spindle. 3/60/440 Volts, 1.2 meter infeed table. 6 -36 meters/min. feed speed (20-118 Feet/min.). 10 HP Infeed motor variable.
Spindle 1 first bottom 20 HP, Spindle 2 right 10 HP, Spindle 3 left 10 HP, Spindle 4 Top 30 HP, Spindle 5 bottom 20 HP Mechanical spindle brakes, 2 powered table rollers,,Central lubrication.
Side pressure before infeed, Hardened table insert after 1st bottom, Radial adjustment of top spindle.
Manual adjustment, Side pressure after left spindle NOT linked to left spindle, 1 Interior light.
Electrics included for connection to material handling.
Separate operating pedestal...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [Q23] - 4 HEAD MOULDER

Inventory #29338

Capacity 4 heads.
Head configuration and HP as follows: bottom left right top.
Working width 1/2" - 9-1/16".
Working height 1/4" - 4-3/4".
5.5 HP bottom spindle.
7.5 HP vertical spindles.
11 HP top spindle.
Feed motor 2 HP.
6,000 RPM spindle speed.
Feed speed 20 - 40'/min.
6'7" straightening table.
Pneumatic pressure for feed rollers.
Infeed roller in front of 1st bottom spindle.
Pressure rollers from above and left side at machine infeed.
Axial spindle adjustment up to 1-1/8...

View Specifications >

		Learn about Machines of Interest to Me >

LEADERMAC [523SX] - 9" 5 HEAD FEED THROUGH MOULDER (B, R, L, T, B)

Inventory #29363

Capacity 5 head.
Bottom 10 HP.
Right / Left shared 15 HP.
Top 10 HP.
Bottom 10 HP.
Standard 5 head configuration with 4 HP feed motor.
1 13/16" spindle diameter, 6,800 RPM.
Currently used for S4S and flooring with 171 hours total...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [U23] - 5 HEAD THROUGH FEED MOULDER, (B, R, L, T, B)

Inventory #29458

Capacity 5 head, 230 mm wide.
4 1/2" x 9 1/16" capacity.
Spindle configuration, 10 HP Bottom, 10 HP right, 10 HP left, 10 HP top and 10 HP bottom.
Spindles are 40 mm diameter.
7 1/2 HP variable speed 20 to 118 FPM.
72" infeed straightening table.
Mechanical digital readouts.
Motorized feed beam adjustment.
Electric brakes on spindles.
White Unimat cover is off in...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [H23C] - 9"X 5" 6 HEAD HIGH SPEED MOULDER (B,R,L,T,T,B)

Inventory #29541

Capacity 9" x 5".
Head sequence: bottom 15 HP, Right 10 HP, Left 10 HP, Top 20 HP, Top 20 HP, Bottom 15 HP.
4' Infeed table.
1 13/16" Diameter spindles at 6000 RPM.
10 HP feed of 20 to 120 FPM.
"Digi-set" for left & both top spindles.
Outboard bearings for spindles 4, 5, 6.
Free standing control pedestal...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 1000] - 6 HEAD THROUGH FEED MOULDER (B,R,L,T,T,B)

Inventory #29555

Capacity 9" x 5".
6 heads with 8,000 RPM spindle speeds to all heads, 1-13/16" diameter spindles.
Head sequence, First bottom head 10 HP, Right side head 15 HP, Left side head 15 HP, First top head 25 HP, Second top head 20 HP, Second bottom head 20 HP.
Machine includes OPTI-CONTROL Measuring system (electronic measuring and LED display) for contactless measuring of tool radius and height and display on electronic digital read-outs (formally known as ATS system).
Automatic Waxalit bed lubrication system.
Full safety and sound enclosure with interior lighting units.
Cardan (chainless) drive system.
Pneumatic pressures to all top feed rollers.
Complete set of cutter heads with HSS corrugated back knives.
ALL books.
Manuals and maintenance records from original owner.
7.5 HP variable speed feed works with feed speeds of 0 to 120'/min.
Wired currently for 460/3/60- 154 total Amp.
6,000 CFM exhaust...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 1000] - 6 HEAD THROUGH FEED MOULDER (B,R,L,T,T,B)

Inventory #29556

Capacity 9" x 5".
6 heads with 8,000 RPM spindle speeds to all heads, 1-13/16" diameter spindles.
Head sequence, First bottom head 10 HP, Right side head 15 HP, Left side head 15 HP, First top head 25 HP, Second top head 20 HP, Second bottom head 20 HP.
Machine includes OPTI-CONTROL Measuring system (electronic measuring and LED display) for contactless measuring of tool radius and height and display on electronic digital read-outs (formally known as ATS system).
Automatic Waxalit bed lubrication system.
Full safety and sound enclosure with interior lighting units.
Cardan (chainless) drive system.
Pneumatic pressures to all top feed rollers.
Complete set of cutter heads with HSS corrugated back knives.
ALL books.
Manuals and maintenance records from original owner.
7.5 HP variable speed feed works with feed speeds of 0 to 120'/min.
Wired currently for 460/3/60- 154 total Amp.
6,000 CFM exhaust...

View Specifications >

		Learn about Machines of Interest to Me >

WEINIG [UNIMAT 500] - 5 HEAD MOULDER WITH PROFILE GRINDER

Inventory #29582

Capacity working width 3/4''-9 1/16''.
Working hieght 5/16''-4 3/4''.
Number of spindles 5.
Spindle diameter 40 mm.
1st bottom spindle 10 hp.
Vertical spindles left and right 15 hp.
2nd bottom spindle 10 hp.
Top spindle 10 hp.
Feed motor 4 hp.
Feed speed ft./min. 16 100.
Spindle speed 6000 RPM.
Length strighting table 6 1/2'.
Memory system.
Set up stand.
Rebate cutter.
Full safety enclosure.
Dust collection spider.
Included 40 mm assorted knife heads 28. with Weinig RONDOMAT 950 profile grinder...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.