Online Catalog - Packaging Equipment

Site Languages:

Credit Cards Accepted:

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

WRAP-O-MATIC [T-26] - SHRINK WRAP LINE C/W L-SEALER AND SHRINK TUNNEL

Inventory #6551

Capacity Shrink Tunnel Model T26.
230 Volt // 3 Phase // 60 Hz // 50 Amp.
26" x 13".
Conveyor speed 0-100 FPM.
Temperature gauge on tunnel 150-750°s.
Metal heavy duty chain rubber coated.
Curtains in good condition.
Tunnel width has opening of 27" but chain width is about 26".
Wrap-O-Matic Model 30 x 32 L-Sealer LEC.
220 Volt // 1 Phase // 60 Hz // 13 Amp.
S/N 81339.
Roll-off for shrink wrap w/the steel plastic separator.
C/W conveyor.
Controls include: pilot light.
Burn off switch.
Conveyor speed.
Temperature.
Sealing time.
Fuse.
On/off switch.
Seal is approx. 31"W x 33"L...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [C3] - SEMI-AUTOMATIC LOW PROFILE TURNTABLE PALLET WRAPPER

Inventory #12589

Capacity large formed heavy duty steel tower.
Rigid unibody base frame construction (formed lift tubes full length welded to base 5/16" steel plate).
5/16" flat steel base plate (thickest gauge in industry for this machine model) 56" diameter 3/8" steel plate with full base frame 60" surround.
20 Table support bearings requiring no lubrication (600lbs dynamic each wheel) heavy duty #50 chain and sprocket drive system.
3-1/8" from floor to top of turntable.
Maximum load size: 55" x 55" (78" diagonal x 90" high).
Weight capacity 4,000 lbs dynamic (20,000 lbs static).
PLC with back lit LCD screen and E-prom memory.
LCD screen providing detailed functions and control viewing.
Flush mount control panel (electronics built into tower).
Panel face screen printed (details button functions & operation).
Power on / off switch and indicator light.
Large Emergency push button power On / Off switch with indicator light.
Start cycle push button.
Standard wrap up / down program.
Separate top and bottom wrap selectors (1-10).
Separate film height over load selector (1"-10").
Reinforce wrap function (2 wraps).
Cycle counter (keeps track of each load wrapped).
Electronic film force to load control on panel.
Variable turntable rotation speed control (0-14 RPM).
Variable speed carriage up / down control.
Manual carriage raise and lower push buttons.
Turntable jog control with auto alignment feature.
PLC with LCD SCREEN built in current overload.
Protection and permanent E-Prom memory.
24 Volt control systems (for operator safety).
Circuit breakers on the panel face for main power and DC drive boards.
Nonproprietary.
User-friendly push button and switches.
FILM DELIVERY: FOX "Linear" 20 inch powered prestretch film delivery system.
Easy thread film carriage.
No hinges.
Latches or idler rollers to wear and cause inconsistent film stretching electronic film force control on panel.
Adjustable mechanical force to load.
Linear analog proximity sensor film feed speed control.
1/2 HP DC SCR variable speed film drive.
Heavy duty ANSI chain & sprocket gearing.
Prestretch 50-300% upon request (200% standard settings).
Triple beam auto height eye capable of recognizing all colours including black.
CARRIAGE LIFT: heavy duty ANSI #50 chain carriage lift.
1/2 HP DC SCR variable speed drive.
V-groove bearing wheels support providing effortless movement (Qty 4).
STRUCTURAL FEATURES: fork lift portable front or rear.
Formed steel tower.
Rigid unibody base frame construction.
TURNTABLE DRIVE: 0 - 14 RPM turntable speed.
1/2 HP DCR SCR variable speed drive.
Adjustable electronic soft start / stop.
Additional $500(Can) for ramp...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [FOX 4] - SEMI-AUTOMATIC PALLET WRAPPER

Inventory #13999

Capacity PLC with back lit LCD screen and E-prom memory.
LCD screen providing detailed functions and control viewing.
Flush mounted control panel (electronics built into tower).
With detailed operations printed on panel face.
Panel face screen printed (details button function & operation).
Power on/off switch and indicator light.
Large emergency push button power on/off switch with indicator light.
Start cycle push button.
Standard wrap up/down program.
Separate top and bottom wrap selectors (1-10).
Separate film height over load selector (1"-10").
Variable turntable rotation speed control (0-14 RPM).
Variable speed carriage up/down control.
Reiforce wrap function (2 wraps).
Top sheet cover pause button.
Cycle counter (keeps track of each load wrapped).
Electronic film force to load control on panel.
Manual carriage raise and lower push buttons.
Turntable jog control with auto alignment feature.
PLC with LCD screen built in current overload protection and permanaent E-prom memory.
Diagnostic screen for easy trouble shooting.
24 Volt control systems (for operator safety).
Circuit breakers on the panel face for main power and DC drive boards.
Nonproprietary user-friendly push button and switches.
Film Delivery: FOX "Linear" 20 inch powered pre-stretch film delivery system.
Easy thread film carriage.
No hinges latches or idler roller to wear and cause inconsistent film stretching.
Electronic film force control on panel.
Adjustable mechanical force to load.
Linear analog proximity sensor film feed speed control.
1/2 HP DC SCR variable speed film drive.
Pre-stretch 50 - 300% upon request (200% standard setting).
Triple beam auto height eye capable of recognizing all colours including black.
Turntable Drive: 0 - 14 RPM turntable speed.
3/4 HP DCR SCR variable speed drive.
Adjustable electronic soft start/stop.
FOX 4 High Profile: HHS base frame construction 52" octagonal turntable C/W 4" skirt.
4 swivel caster support system (2000 lbs capacity each).
No face lubrication required.
Heavy duty #60 chain & sprocket drive system.
Lubrication points on caster roller bearings and swivels.
10-7/8" from floor to top of turntable.
Weight capacity 4,000 lbs dynamic (10,000 lbs static).
Will accommodate large load size 48" x 96".
Technical Information" PLC with LCD display (displays function control).
Complete manual with electrical schematic.
All switches.
Relays SCR controls etc. are available locally throughout North America.
115 VAC @ 15 Amp.
60 Hz.
Machine modified with 52" diameter t/table & extended base.
Use with tow motor loading...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [R360] - AUTOMATIC RING WRAPPER

Inventory #16234

Capacity automatic wrapper to accomodate product max. width 45" x max. height 36".
Max. length 36" and up.
Controls: main panel Nema 12 (36" x 36" cabinet on each unit).
Mitsubishi PLC.
Touch screen operation selection (Nais).
Main 575 Volt // 3 Phase // 60 Hz // 20 Amp disconnect switch.
Main fuses 20a.
Auto/manual selector switch.
Main control power push illuminated button.
Safety lockout switch on door (shuts off control power).
Open/close film clamp.
Jog ring push button.
Jog in feed conveyor.
Jog exit conveyor.
All controls 24 Volt DC.
Ring drive motor 3 HP AC frequency drive.
A/C tech 5 HP controller.
Photo-eye sensor for carriage home positioning and end band counter.
Full detailed electrical schematic.
Electrical controls name brand.
Obtainable from local suppliers.
Ring: 60" ID ring bearing - timing belt drive.
Ring speed variable from 0 to 45 RPM.
Pass through height of product at 40".
Ring support frame 1/2" steel plate reinforced with 3" x 3" x 3/16" HSS tube.
Mechanics: pneumatic film cut with hot wire impulse cutter.
Heavy duty 3" x 3" x 3/16" HSS tubing frame consturction.
Fully guarded for operator protection.
Standard name brand parts which can be obtained from local supplier.
In-Feed and Exit Belt: 8' belt conveyor with 48 wide rough top belt in-feed and 8' long belt conveyor with 48 wide rough top belt at exit.
6" head roller & 4" tail roller.
Speed 0 - 15 feet/min.
1 HP DC variable speed motor and controls.
Soft start/stop control.
Auto indexing of loads by photo eyes.
Film Carriage: 10" Fox LINEAR pre-stretch film carriage.
Supports film rolls 10" long x 10" diameter.
Easy fill tensioning adjustment on carriage control.
1/2 HP DC 90 Volt motor film delivery drive.
Power provided to film carriage by slip rings.
Film prestretch set at 200% by factory.
Delivery 10 to 11 weeks from date of purchase order and deposit.
Warranty: 2 years on parts.
Customers misuse or lack of maintenance will void parts warranty.
Labor not included.
These machines can not be operated out doors...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [7] - ROTARY ARM PALLET WRAPPER

Inventory #18353

Capacity control features PLC with back lit LCD screen built in current overload protection and permanent E-Prom memory.
LCD display screen providing detailed function control viewing with detailed operations printed on panel face for easy operator reference.
Large Emergency push button power On/Off switch with indicator light.
CSA & UL approved NEMA 4 control panel box.
Start cycle push button.
Wrap up / down program / Wrap up only selector on PLC screen.
Separate top and bottom wrap selectors (1-10).
Separate film height over load selector (1"-10").
Variable arm rotation speed control (0-12 RPM).
Variable speed carriage up / down control.
Reinforce wrap function.
Top cover pause.
Cycle counter (keeps track of each load wrapped).
Electronic film force to load control on panel.
Manual carriage raise and lower push buttons.
Arm jog control with auto alignment feature.
24 Volt control systems (for operator safety).
Circuit breakers on the panel face for main power and DC drive boards.
Soft start / stop DC drives.
Non proprietary.
User-friendly push button and switches.
Technical information all switches.
Relays.
SCR controls are available locally throughout North America.
Power Requirements: 115 VAC @ 15 Amps.
60 Hz.
Complete manual with electrical schematic provided with machine.
Film delivery FOX "Linear" 20 inch powered pre-stretch film delivery system.
Easy thread film carriage.
No hinges.
Latches or idler rollers to wear and cause inconsistent film stretching.
Electronic film force control on panel.
Adjustable mechanical force to load.
Linear analog proximity sensor film feed speed control.
1/2 HP DC SCR variable speed film drive.
Pre-stretch 50-300% upon request (200% standard settings).
Triple beam auto height eye capable of recognizing all colors including black.
3 leg grantry style.
Carriage lift V Groove wheel supports providing effortless movement and maximum stability (Qty4).
Heavy duty ANSI #50 chain carriage lift.
1/2 HP DC SCR variable speed drive.
Fox 7 rotary arm pallet wrapper.
15 Precision Ring Gear - 25,000lb load supporting capacity.
Pinion drive gear.
Heavy duty structural steel tube construction.
Suggested Maximum Load Size 50" L x 50" W.
(72" Diagonal) x 80" High.
Weight capacity unlimited.
Arm drive 0 - 12 RPM Arm Speed.
1/2 HP SCR variable speed.
Adjustable electronic soft start / stop.
Positive home position alignment.
Safety beam proceding rotating tower provides.
Emergency stop in the event of obstruction.
(stop distance 8").
Structural full length back frame for floor support.
Designed for easy installation against support beam or supporting wall.
Free standing models available.
Heavy duty structural steel tube construction.
OPTIONS rotary arm main frame increase.
(to increase size of package to 48" X 108" mast needs increase by 46" - $1,950 Canadian).
Height increase.
(to increase height of package from 80" - 96" $800 Canadian).
Free standing style.
Gantry stand with 3 or 4 legs.
(3 legs $1,400 Canadian).
Automatic end of cycle film cut off...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [C1] - SEMI-AUTOMATIC PALLET WRAPPER

Inventory #19879

Capacity 5000 lb. weight bearing.
Variable speed film carriage and turntable 0 to 15 RPM with 1/2 HP SCR variable drive.
Separate top & bottom wrap selector1 - 9.
Separate film height selector 1-9".
Photo-eye for load height sensing.
90" wrap height.
Uses 20" machine film with 100% stretch.
Machine features the most rugged base frame in the industry.Programmable Key pad controls with LCD display.
Cycle counter.
Manual raised and lower carriage control.
Turntable jog with auto home aligment.
Large emergency push button power on/off switch with indicator light.
Standard wrap up/down program.
12 Volts DC control system (for operator safety).
Fork lift portable from rear.
Table 56" diameter with 24" clearence from post...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [1L] - TURNTABLE

Inventory #20237

Capacity rigid base frame construction.
2 3/4" from floor to top of turntable.
Suggested maximum load size 55" x 55...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [C3 WITH TOP PLATEN] - SEMI-AUTOMATIC WRAPPER WITH TOP PLATEN

Inventory #20242

Capacity large formed heavy duty steel tower.
Rigid unibody base frame construction (formed lift tubes full length welded to base 5/16" steel plate).
5/16" flat steel base plate (thickest gauge in industry for this machine model) 56" diameter 3/8" steel plate with full base frame 60" surround.
40 Table support wheels requiring no lubrication (600lbs dynamic each wheel) heavy duty #50 chain and sprocket drive system.
3-1/8" from floor to top of turntable.
Maximum load size: 55" x 55" (78" diagonal x 96" (optional height) .
Weight capacity 5,000 lbs dynamic (20,000 lbs static).
Programmable key pad controls.
LCD display screen (providing detailed function and control viewing).
Flush mount control panel (electronics built into tower).
Panel face screen printed (details button functions & operation).
Power on / off switch and indicator light.
Large Emergency push button power On / Off switch with indicator light.
Start cycle push button.
Standard wrap up / down program.
Separate top and bottom wrap selectors (1-10).
Separate film height over load selector (1"-10").
Reinforce wrap function (2 wraps).
Cycle counter (keeps track of each load wrapped).
Electronic film force to load control on panel.
Variable turntable rotation speed control (0-14 RPM).
Variable speed carriage up / down control.
Manual carriage raise and lower push buttons.
Turntable jog control with auto alignment feature.
PLC with LCD SCREEN built in current overload.
Protection and permanent E-Prom memory.
24 Volt control systems (for operator safety).
Circuit breakers on the panel face for main power and DC drive boards.
Nonproprietary.
User-friendly push button and switches.
FILM DELIVERY: FOX "Linear" 20 inch powered prestretch film delivery system.
Easy thread film carriage.
No hinges.
Latches or idler rollers to wear and cause inconsistent film stretching electronic film force control on panel.
Adjustable mechanical force to load.
Linear analog proximity sensor film feed speed control.
1/2 HP DC SCR variable speed film drive.
Heavy duty ANSI chain & sprocket gearing.
Prestretch 50-300% upon request (200% standard settings).
Triple beam auto height eye capable of recognizing all colours including black.
CARRIAGE LIFT: heavy duty ANSI #50 chain carriage lift.
1/2 HP DC SCR variable speed drive.
V-groove bearing wheels support providing effortless movement (Qty 4).
STRUCTURAL FEATURES: fork lift portable front or rear.
Formed steel tower.
Rigid unibody base frame construction.
TURNTABLE DRIVE: 0 - 14 RPM turntable speed.
1/2 HP DCR SCR variable speed drive.
Adjustable electronic soft start / stop.
Additional $500(Can) for ramp...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [C3PA] - FULLY AUTOMATIC PORTABLE WRAPPER

Inventory #20236

Capacity clamps/cuts & wipes (Pneumatic operated).
Fox unique cam operated film clamp assembly on FOX C3PA.
Fox "Linear" 20 inch powered pre-stretch film delivery system.
Suggested maximum load size 48"L x 54"W x 90" High.
3 1/8" from floor to top of...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [MLP] - MANUAL WRAPPER

Inventory #20234

Capacity rigid base frame construction.
Counter balanced film carrige for ease of lifting by operator (non powered lift).
Friction dispenser film carriage ( 14" to 20" film web width).
11" from floor to top of turntable.
Four swivel table support casters (swivel casters eliminate excessive wear) suggested maximum load size 52"L x 52"W (72" Diagonal) x 74" High...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [9] - CHAIR LEGS SPECIAL WRAPPER

Inventory #20258

Office chair legs stacked on mandrel.
Bands legs with 10" film.
Automatically applies and cuts film.
Film carriage moves vertically and horizontally.
Stretch wrapped bundle is secured.
Customer eliminated corrugated and other consumables...

View Specifications >

		Learn about Machines of Interest to Me >

DAMARK - SEMI AUTO L BAR SEALERS WITH POWER FILM DRIVE

Inventory #23197

Capacity semi-automatic "L" bar sealer with power film drive.
Shrink tunnel in picture NOT INCLUDED and no longer available...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [C 4 EXTENDED] - SEMI AUTOMATIC PALLET WRAPPER FOR 5' X 10'

Inventory #23473

Capacity control features flush mounted control panel built into tower.
Lcd display screen providing detailed function control viewing.
With detailed operations printed on panel face for easy operator reference.
Plc with back lit lcd screen and e-prom memory.
Large emergency push button power on / off switch with indicator light.
Start cycle push button.
Standard wrap up / down program.
Separate top and bottom wrap selectors (1-10).
Separate film height over load selector (1"-10").
Variable turntable rotation speed control (0-14 rpm).
Variable speed carriage up / down control.
Reinforce wrap function (2 wraps).
Cycle counter (keeps track of each load wrapped).
Manual carriage raise and lower push buttons.
Turntable jog control with auto alignment feature.
24 Volt control systems (for operator safety).
Circuit breakers on the panel face for main power and dc drive boards structural fork lift portable front or rear large formed steel tower base plate 5/16" thick steel rigid unibody base frame construction technical information all switches, relays, scr controls are available locally throughout north america.
Power requirements: 115 vac @ 15 Amp.
60 Hz complete manual with electrical schematic provided with machine.
Film delivery fox "linear" 20 inch powered pre-stretch film delivery system.
Easy thread film carriage.
No hinges, latches or idler rollers to wear and cause.
Inconsistent film stretching.
Electronic film force control on panel.
Adjustable mechanical force to load.
Linear analog proximity sensor film feed speed control.
1/2 HP dc scr variable speed film drive.
Pre-stretch 50-300% upon request (200% standard settings).
Triple beam auto height eye capable of recognizing all.
Colors including black.
Carriage lift v groove wheel supports providing effortless movement and maximum stability (qty4).
Heavy duty ansi #50 chain carriage lift.
1/2 HP dc scr variable speed drive.
Turntable drive positive home alignment.
0 -14 RPM turntable speed.
1/2 HP scr variable speed drive.
Adjustable electronic soft start / stop.
Options ramp (fox c3).
Heavy duty ramp for electric.
Powered hand truck (fox c3).
Ramp extension (fox c3).
Tower height extension (fox c3-c4).
Base extension (fox c3-c4).
Roping bar (fox c4).
Scale package (fox c3-c4).
Automatic end of cycle film.
Cut off (fox c3-c4).
Dual turntable (fox c3-c4).
Top platen (fox c3-c4).
FOX C4 (High Profile) rigid base frame construction.
48" octagon steel turntable plate.
No face lubrication required.
Lubrication points on caster roller bearings and swivel.
4 support swivel casters under table.
Heavy duty #50 chain and sprocket drive system.
10 7/8" from floor to top of turntable.
Standard base with 2 extension to accommodate up to 10 feet long panel...

View Specifications >

		Learn about Machines of Interest to Me >

DYNARIC [DF - 11] - BOTTOM SEAL STRAPPING SYSTEM

Inventory #23482

Capacity 3/8" or 1/2" strap width.
23.6"H Arch x 27.6" W.
Min.
Package size 1.5" H x 3.5" W Heat seal.
Bottom sealing head location.
Automatic strap feeding.
Digital display reflects the operations status, including an error code read out.
Easily adjustable external tension control.
Motor automatically shuts down when machine not in...

View Specifications >

		Learn about Machines of Interest to Me >

NEW-MA [VERT560] - PACKING LINE FOR FURNITURE HARDWARE

Inventory #23765

Capacity vertical form fill and seal machine mod.
Vert 560.
Poly version.
Controlled by PLC Siemens.
Electronic card for immediate detection of the sealing bands breakage and consequent automatic machine stop.
Single synchronization basket.
Outfeed belt.
Dynamic weight checker mod CPV 30.
Counter for flat products diameter 450-550 mm.
Supplement for RNA-BOSCH counter.
diameter up to 450 mm.
Support frame for 2 counters.
Double syncronization basket.
Modem for remote assistance.
Knee belt for Vert 560.
Support for thermo-transfer printer.
Sorting table for manual loading procedures on vert 560.
With legs and push button panel on the table.
DWC double loading cell weight/count machine.
Supplement for PC-run packing line.
Push button panel to control counter's speed.
Placed directly on the counter.
60 lt hopper placed on the counter.
Predisposition for 10 counters.
Additional forming tube having max. external diameter up to 110 mm.
C/W Markem SmartDate Intemittent Motion Thermal Transfer System 107 X 70 mm...

View Specifications >

		Learn about Machines of Interest to Me >

REALTUFF - SHAVINGS BALER

Inventory #17738

Capacity 50 to 75 bales/hr.
30 HP motor on hydraulic unit.
Starter not included.
25 G.P.M. pump.
50 gallon reservoir.
Takes planer or moulder sized shavings.
Will bale a 3.5 cu. ft. compressed bale and push it into a bag.
Bale size 12" x 16" x 32".
By making the bale 36" long you have 4.0 cu. ft.
Baler can be built to your specifications if other sizes of bales are required.
Hopper feed for the shavings.
Rest of the machine is horizontal.
Operation of baler: plastic bag of required size is pulled over the horizontal compression chute.
End of the chute is closed off by a hinged gate.
Shavings are fed into the top of fill chute and can be seen through window.
Compression ram compacts shavings in the baler.
The number of strokes needed to make bale will vary with bale size and type of material used.
After required amount of shavings are compacted in chute the end of the chute is opened and shavings are pushed out filling the bag as it expels from the baler chute.
Top of bag is tied or taped and bale is finished.
50% deposit required.
Balance due upon completion.
Lead time approximately 30 can be 575 Voltage with additional charge.
Machine can be made that the bale comes out on the operators right or left side.
1 year warranty supplied by manufacturer...

View Specifications >

		Learn about Machines of Interest to Me >

SIGNODE [B300] - STRAPPING MACHINE

Inventory #24079

Capacity 3/4 HP motor.
10.5" strap size.
2' x 4' maximum package size...

View Specifications >

		Learn about Machines of Interest to Me >

WULFTEC [WSML 200-S] - SEMI AUTOMATIC VERTICAL STRETCH WRAPPER

Inventory #24920

Capacity 65" standard base turntable.
80" wrap height.
20" NO-THREAD powered pre-stretch carriage.
Allen Bradley electrical componants.
Dual chain carriage lift.
All steel structure.
Vertical stretch wrapper for cabinets, doors or windows.
Includes additional rolls of stretch film...

View Specifications >

		Learn about Machines of Interest to Me >

COUSINS PACKAGING [LP2200A] - STRETCH-WRAPPING MACHINE

Inventory #25133

Capacity This model can be operated in automatic or semi-automatic mode.
Low profile (2-1/4" elevation).
Designed to be loaded either by forklift or pallet jack in conjunction with the access ramp included.
Accepts all commercial stretch films to 1.2 mils thick, 10 " in roll diameter, Up to 20" web height.
Programmable Logic Controller (PLC) in conjunction with an Operator Interface Panel (OIP).
Turntable speed is manually controlled from 0 to 15 RPM by potentiometer inside the control panel.
Film carriage elevation speed is manually controlled from min. stall to max. speed by potentiometer, seperate speed potentiometer for raise and lower speeds.
Loading capacity 4000 lbs turning and 17000 lbs static, Pallets up to 50" square (71" max. diagonal and 84" overall height.
Unit is provided with fork pick up channels.
Auto load height sensing by photo-eye to automatically detect the top of the load...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [SS2- 48] - 48" SEMI AUTOMATIC RING WRAPPER

Inventory #25909

Capacity to accommodate product: Width 45", max.
Height 5", Length 36" & up.
Controls: Main panel Nema 12 (16" x 12" cabinet on each unit).
FOX PC Logic Controller.
Main 240V/3PH/20A/60HZ disconnect switch.
Main fuses 20A.
Touch screen controls.
Auto/Manual Selector Switch.
Main control power push illuminated button.
Safety lockout switch on door (shuts off control power).
Jog ring push button.
Open close clamp.
Foot pedal run ring and sequence control.
All controls 12V DC.
Ring drive motor 1 HP DC 180V.
Film carriage home position detection.
Full detailed electrical schematic.
Electrical controls name brand.
Obtainable from local suppliers.
Ring: 48" ID precision machined steel ring.
Machined urethane ring support wheel with two sealed bearings (qty of 5).
12" dual urethane drive wheels with 1-15/16" axles.
#50 chain and sprocket drive.
Ring speed from 0 to 50 RPM.
Pass through height of product at 36".
Ring support frame 1/4" steel plate reinforce with 2" x 2" x 3/16" HSS tube.
Mechanics: Pneumatic film clamp.
Pneumatic film cut with knife blade (fully guarded for operator protection).
Heavy duty 2" x 2" x 3/16" HSS tubing frame construction.
Fully guarded for operator protection.
Standard name brand parts which can be obtained from local supplier.
Film carriage: 10" mechanical "Dynamic" friction film carriage.
Supports film rolls 10" Film web width 9 1/2" diameter.
Easy fill tensioning adjustment.
Conveyance: Powered rubber roller on the in-feed and one powered rubber roller on the exit.
1/2 HP 90V DC motors with variable speed...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [SS1-65] - 60" MANUAL RING WRAPPER

Inventory #25907

Capacity To accommodate product max.
Width 60", max.
Height 5".
Controls: Main panel Nema 12 (12" x 12" cabinet on each unit).
Main 220V/1PH/15A/60HZ disconnect switch.
Main fuses 15A.
Main control power push illuminated button).
Selector switch run ring - stop ring rotation.
All controls 120v AC.
Ring drive motor 1-1/2 HP DC 180V.
Full detailed electrical schematic.
Electrical controls name brand.
Obtainable from local suppliers.
Ring: 65" ID precision machined steel ring.
Machined urethane ring support wheel with two sealed bearings (qty of 4).
12" dual urethane drive wheels with 1-13/16" axle.
#50 chain and sprocket drive.
Ring speed from 0 to 25 RPM.
Ring support frame 1/4" steel plate reinforce with 1 1/2" x 1 1/2" x 3/16" HSS tube.
Film carriage: 10" mechanical "Dynamic" friction film carriage.
Supports film rolls 9" diameter.
Easy fill tensioning adjustment.
One Idler roller on the in-feed and one idler roller on the exit to roll product over...

View Specifications >

		Learn about Machines of Interest to Me >

PREFERRED PACKAGING [PP80 128] - 18" X 24" IN LINE SHRINK WRAP MACHINE

Inventory #27299

Capacity Approx 18" wide x 24" long part.
Conveyor feed.
Enclosed shrink chamber.
Includes (1) roll shrink wrap...

View Specifications >

		Learn about Machines of Interest to Me >

WEIGHTPACK [XP800] - VERTICAL FORM FILL MACHINE

Inventory #27586

XPDius Form Fill Seal machine is designed to meet the automatic packaging requirement of various solids.
It automatically creates a strong fin seal bag using rolls of laminate or poly film.
The machine can be interfaced with many types of filling units or other auxiliary equipment.
Pack speed = 40-100 bags/min.
Bag size = Length = 4" to 11".
Width = 3" to 8".
Film Roll: OPP/CPP, OPP/PE, MST/PE, PET/PE.
Film thickness: .0016 to .0031 inches.
Total power: 3.5 kW...

View Specifications >

		Learn about Machines of Interest to Me >

SIGNODE [HB 4300] - SEMI AUTOMATIC PLASTIC STRAPPING MACHINE

Inventory #27943

Capacity 31" wide x 21" height (80 x 54 cm).
Speed 52 straps/min.
Plastic strips 9 to 10.5 mm wide...

View Specifications >

		Learn about Machines of Interest to Me >

PREFERRED PACKAGING [SFE 1100 NF] - SHRINK WRAPPING MACHINE WITH INLINE FEEDING

Inventory #27944

Capacity speed 10 to 20 ppm.
Fully automatic operation.
Photo eye activation on seal cycle.
Self cleaning hot knife seal bar for smoke free sealing (no maintence).
Re-circulating air chamber in tunnel provides for great looking package.
Pneumatic product holddown helps to stabalize product during transfer.
Sealing bag length 1070 mm.
Max. package height 400 mm...

View Specifications >

		Learn about Machines of Interest to Me >

BMR [1000] - BAGGING SCALE SYSTEM, CONVEYOR, HEAT SEALER

Inventory #28444

Capacity ESP GB-17 bagging scale, bag at a rate of 5-7 bags/min. with a +/- 4 ounce accuracy, used with open mouth 25 lb bags with a larger than 24" circumference.
12" belt x 9' long sewing conveyor 1/2 HP single phase with variable pitch sheave for speed tuning and foot pedal activation, includes backstop rail to keep bags upright and on conveyor.
BMR 1000 heat sealer with stand, adjustable speed control and control panel with Allen Bradley controls...

View Specifications >

		Learn about Machines of Interest to Me >

VERVILLE [VP-300] - BAGGER

Inventory #28656

Capacity 3 Stations.
Hydraulic Unit.
Three (3) Feeder Screws.
One (1) Main Screw.
Control Panel.
No Staple...

View Specifications >

		Learn about Machines of Interest to Me >

MANUAL L-BAR SEALER

Inventory #28920

Capacity Package Size Maximum 18" wide X 23" long.
Film Maximum 25".
Footprint 33" wide x 60" long.
Manual "L" bar sealer designed to cycle at speeds up to 10 packages per Sealing head is fully counterbalanced (no springs are used).
Temperature compensation circuit provides an accurate sealing temperature over a wide range of operating speeds.
Sealing system is a low Voltage impulse resistance .036 wire.
Constructed from heavy gauge sheet metal.
Stainless steel loading tray and table...

View Specifications >

		Learn about Machines of Interest to Me >

WELDOTRON [5911-C] - FULLY AUTOMATIC SHINK WRAP L-SEALER

Inventory #28935

Capacity max. seal dimensions 30" x 16" x 6".
Max. film width 24".
Production speed up to 25 pkgs/min.
With hole punch MP-4019...

View Specifications >

		Learn about Machines of Interest to Me >

FOX [C1PA] - FULLY AUTOMATIC PORTABLE WRAPPER

Inventory #29082

Capacity clamps/cuts & wipes (Pneumatic operated).
Fox unique cam operated film clamp assembly on FOX C1PA.
Fox "Linear" 20 inch powered pre-stretch film delivery system.
Suggested maximum load size 48"L x 54"W x 90" High.
3 1/8" from floor to top of turntable.
Programmable Key Pad Controls.
LCD display screen.
Variable film carriage and turntable speed (0-15 rpm).
Seperate top/bottaom wrap selector.
Seperate film height selector 1-9".
Turntable jog with auto home alignment.
Triple beam auto height eye capable of recognizing all colors including black.
Weight capacity 5000 lbs.
Heavy duty 3/8" turntable plate.
Carriage chain fully guarded.
Pre-stretch 50-300% on request (200% standard setting).
1/2 HP DC SCR variable speed film drive...

View Specifications >

		Learn about Machines of Interest to Me >

CLAMCO [110-14] - 14" X 14" SHRINK WRAP SYSTEM

Inventory #29184

Capacity unitezed sealer tunnel combination.
Microprocessor controlled heat cycle with temperature compensation and film burn off switch.
Height adjustable heavy duty seal head with film clamps.
Adjustable height wrapping platform.
Adjustable heavy duty seal pads.
Heavy duty film cradle with brake.
High efficiency heat tunnel is thermostatically controlled up to 500°s.
Termperature control, variable speed, heated conveyor belt for excellent bottom shrink.
Celophane cutter NOT INCLUDED...

View Specifications >

		Learn about Machines of Interest to Me >

REALTUFF [81836] - COMPACTER, BALER AND BAGGER

Inventory #29577

Capacity 50 to 75 bales/hr.
30 HP motor on hydraulic unit.
Starter not included.
25 G.P.M. pump.
50 gallon reservoir.
Takes most compactable materialplaner or moulder swill bale a 3 cu. ft. compressed bale and push it into a bag.
Bale size 8" x 18" x 32".
By making the bale 36" long you have 4.0 cu. ft.
Baler can be built to your specifications if other sizes of bales are required.
Hopper feed for the shavings.
Rest of the machine is horizontal.
Operation of baler: plastic bag of required size is pulled over the horizontal compression chute.
End of the chute is closed off by a hinged gate.
Shavings are fed into the top of fill chute and can be seen through window.
Compression ram compacts shavings in the baler.
The number of strokes needed to make bale will vary with bale size and type of material used.
After required amount of shavings are compacted in chute the end of the chute is opened and shavings are pushed out filling the bag as it expels from the baler chute.
Top of bag is tied or taped and bale is finished.
50% deposit required.
Balance due upon completion.
Lead time approximately 30 can be 575 Voltage with additional charge.
Machine can be made that the bale comes out on the operators right or left side.
1 year warranty supplied by manufacturer...

View Specifications >

		Learn about Machines of Interest to Me >

HIGHLIGHT [MSB-90-10] - 88" STRETCH BUNDLER

Inventory #29622

Capacity 88" "MIMA".
Infeed driven tilt roller conveyor.
76" capacity x 77" long.
Rollers 76" long x 4" diameter on 8" centers.
.75 HP.
Feeds to flat belt conveyor.
80" wide x 132" long with roller holddown, 3/4 HP.
Feeds to ring wrapper, feeds to outfeed conveyor 80" wide x 130" long 3/4 HP.
Safety cage.
(this unit built by Highlight).
Will use 10" to 20" film...

View Specifications >

		Learn about Machines of Interest to Me >

HIGHLIGHT [REVOLVER 8020] - 80" STRETCH ORBITAL RING WRAPPER

Inventory #29648

Capacity 80" Orbital ring.
Infeed driven belted conveyor 72" capacity.
Variable feed speed to ring wrapper.
Then to outfeed conveyor 72" wide x 130" long 3/4 HP.
Will use 20" film with variable tension and ring rotation speed all thru a central control panel...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.