Misc.

Site Languages:

Credit Cards Accepted:

FEATURED PRODUCTS

NASH [85] - 9" CHAIR BACK SANDER...

DELTA [31-250] - 18" DRUM SANDER...

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

NASH [88] - TURNING SANDER

Inventory #10135

Capacity 4 spindles.
Up to 12" long and 5" dia.
3 HP motors.
Sands 10 pcs/ min.
Has three sanding racks and one buffing station.
Tailstock cam lever rollers were upgraded to ball bearing rollers.
Tailstock spindle assemblies were rebuilt.
Sanding racks were upgraded to accept the neoprene sandpaper clamps.
All original parts will come with the machine...

View Specifications >

		Learn about Machines of Interest to Me >

VERSA CRAFT [VC 385 C] - SINGLE PHASE DRUM SANDER

Inventory #21408

Capacity 38 inch.
5 HP variable speed infeed conveyer.
6" wide abrasive cloth wrapped around the drum.
The 6" aluminum drum is covered with 1/2" felt for smoother sanding.
The bed will lower enough to accept a 5" thick stock.
The bed rests on 4 jack screws that is attached to a side mount handle for a smooth up and down adjustment...

View Specifications >

		Learn about Machines of Interest to Me >

OLIVER [381D] - TILTING ARBOR SPINDLE SANDER

Inventory #23766

Capacity 1 HP, 1800 RPM oscillating 1" diameter spindle.
3" vertical spindle adjustment.
1/18" oscillation travel.
Spindle and motor unit tilts 45°s forward and 5°s backward.
Large 37" x 37" steel table top.
Large hand wheel for spindle height adjustment.
Push button magnetic controls...

View Specifications >

		Learn about Machines of Interest to Me >

PROGRESS MACHINE COMPANY [P-200] - PNEUMATIC DRUM AND BRUSH SANDER

Inventory #25468

Capacity 2 HP double drum sander.
Pneumatic bags with sanding sleeves on twin horizontal shaft.
Pedestal stand with starter...

View Specifications >

		Learn about Machines of Interest to Me >

PEERLESS - 15" VERTICAL SANDER

Inventory #26113

Capacity 15" Wide x 21" high.
Platen belt size 15" x 180".
Tilting table 9-1/2" x 30".
5 HP Motor.
Belt drive...

View Specifications >

		Learn about Machines of Interest to Me >

NASH [85] - 9" CHAIR BACK SANDER

Inventory #26430

Capacity This machine is designed to sand curved or serpentine stock.
Abrasive belt motor 7-1/2 HP.
Feed drive motor 1/2 HP.
Variable speed 18 to 55 FPM.
Height range to 9".
Thickness range to 3".
Drive drum 10" diameter x 15" long.
Belt size 10" x 107".
6" Dust outlet...

View Specifications >

		Learn about Machines of Interest to Me >

OAKLEY [H-12] - 12" DRAWER SANDER

Inventory #26313

Capacity 12".
(2) 3 HP Direct drive motors.
13" x 66" Platen size.
12" x 180" Sanding belt.
Foot pedal with ceramic lip attachment.
Dust hood 60" Wood back table...

View Specifications >

		Learn about Machines of Interest to Me >

SAND MAN PRODUCTS [7236] - DOWNDRAFT SANDING STATION

Inventory #27054

Capacity 2600 CFM.
3/4 HP Motor.
2" Deep microfine filters.
5" Casters for portability.
ABS Plastic tops with 1/8" PSA industrial felt strip surface...

View Specifications >

		Learn about Machines of Interest to Me >

DELTA [31-250] - 18" DRUM SANDER

Inventory #27979

Capacity 18" open end, will do 36".
1 - 12 sfpm.
1 1/2 HP motor...

View Specifications >

		Learn about Machines of Interest to Me >

RITTER [CR365] - SINGLE SIDED SHAPER SANDER

Inventory #27029

Capacity 1-1/4" Diameter x 5" Usable Length Spindle, .0005 Spindle accuracy.
Single cutter capability.
3-Station arching, Shaping & sanding system.
4" to 7"Cutter diameter capacity.
7-1/2 HP Spindle drive motor.
TEFC.
5,000 to 7,000 Spindle RPM.
Timing belt driven.
1-Ton cutterhead height.
Precision adjustment screw jack.
Precision ground bronze ball swing Arm.
1-1/2" Diameter swing arm shaft.
Front and rear spindle height.
Adjustment station.
2 Electronic display tilting sanding stations.
(2) ÿ ÿ1-1/4" X 4" Sanding spindles.
Air-jet sanding head cleaning.
Inverter Variable RPM spindle speed.
Reversing.
Inverter spindle brake.
Pneumatic floating spindle for arch shaping applications.
Digital display.
Horizontal and vertical spindle adjustment.
Heavy cast iron shaper station assembly.
6" Diameter safety hood.
900 CFM Required...

View Specifications >

		Learn about Machines of Interest to Me >

WYSONG & MILES - 36" DOUBLE DISK SANDER

Inventory #28980

Capacity 36".
3 HP Motor.
Belt drive motor.
Tilting tables.
Good bearings.
It spins for a long time after the power is cut.
70's or 80's...

View Specifications >

		Learn about Machines of Interest to Me >

NASH [150-72] - 72" AUTOMATIC TURNING SANDER

Inventory #28938

Caoacity 72".
Ten (10) Spindles.
Five (5) stage sanding rack.
56" Long.
Hopper feed.
Spindle drive motor approxmately 10 HP.
3/4 HP Oscillation motor...

View Specifications >

		Learn about Machines of Interest to Me >

GRIZZLY [G1066R] - 24" 2 HEAD DRUM SANDER

Inventory #29139

Capacity 23-1/2" x 4-1/4"H.
2 Heads.
24" X 35" Table size.
5 HP.
1/4 HP Conveyor motor feed speed at 11 FPM.
2 Aluminum grinding drum heads.
Very good condition, Originally purchased new...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.