Online Catalog - Tenoners - Double End

Site Languages:

Credit Cards Accepted:

FEATURED PRODUCTS

MEREEN JOHNSON [660] - 14 HEAD DOUBLE END TENONER...

CELASCHI [TSA 360 C] - 12 HEAD DOUBLE END TENONER...

FRIULMAC [FN-5-1800] - DOUBLE END PROFILER...

J P MACHINES [4HTS430] - DOUBLE END TENONER...

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

CHALLONER [3000] - 17 HEAD DOUBLE END TENONER

Inventory #9529

Capacity 120" opening.
76" load space.
15 HP right and left hand tilting scoring and hogging heads.
5 HP right and left hand top and bottom scoring saw heads.
10 HP right and left hand top and bottom tenon heads.
15 HP right and left hand vertical cope heads.
15 HP right and left hand horizonal cope heads.
3 - 5 HP jump dado heads on full length rail.
Programmable vertical and horizontal head positioning with digital readouts and laser light alignment.
8" adjustment of pressure beams.
Sound enclosure.
Programmable logic controller (P.L.C.).
Free standing programmable control pedestal with equipment monitoring.
Stacked tooling programming.
Auto traverse.
Speed control and data readout.
Currently arranged for 230 Volt operation.
Low usage.
Only used 3 years...

View Specifications >

		Learn about Machines of Interest to Me >

CHALLONER [780] - DOUBLE END TENONER

Inventory #10409

Capacity opens to 86".
Good accuracy.
Four heads per side: tenon 3 HP.
Tenon 2 HP.
Cope to tenon or anywhere in between 2 HP.
Cope 3 HP.
Variable speed.
Adjusted by handcrank from the front of the machine.
Feed rate from 12 to 21 pieces/min.
Will handle stock 3/4" to 1-3/4" thick 5-1/4" wide up to 92" long.
Tenoner portion of machine has block-type steel feed chains with every fourth link milled for feed dogs.
Rubber padded traveling chain holddowns provide the pressure necessary to hold the stock firmly...

View Specifications >

		Learn about Machines of Interest to Me >

CHALLONER [527-TS] - 12 HEAD DOUBLE END TENONER

Inventory #11211

Capacity 54" of loadspace in front of the holddowns.
84" of length capacity.
Double screw stock guide.
Smooth topped feed chains with pop up dogs on 16" centers.
Feed chain in good condition.
Variable speed drive with motor brake.
(2) 5 HP tilting trim saw motors.
With 1-1/2" diameter x 3-1/4" long spindles.
(4) 2 HP scoring saw motor units with 7/8" diameter x 3-1/4" long spindles.
(4) 5 HP tenon units with 1-1/2" diameter x 3-1/4" long spindles.
(2) 7.5 HP high speed cope units with 1-1/4" diameter x 4-1/4" long spindles.
Dust hoods on all motor units and all related equipment...

View Specifications >

		Learn about Machines of Interest to Me >

J P MACHINES [4HTS430] - DOUBLE END TENONER

Inventory #12665

Capacity hopper magazine and digital mechanical indicators for fast and accurate setup.
Electronic Keypad to open and close the machine to the desire size.
Two saw motors 4 HP direct drive 3600 to 6000 RPM 600 VAC.
Saw diameter 200 mm, 30 mm bore.
Two shaping heads direct drive 4 HP each adjustable speed up to 6000 RPM Shaping head adjustable on Z and X axis.
Shaping diameter 200 mm.
30 mm.
Linear bearings on moveable opening and closing side of the machine.
Precision Linear bearings on the pusher.
Minimum working length 5 "Maximum 36" (other sizes available upon request).
Minimum working width 1", Maximum 6".
Tooling not included.
Delivery 14-16 weeks...

View Specifications >

		Learn about Machines of Interest to Me >

MEREEN JOHNSON [MJ 660] - DOUBLE END TENONER

Inventory #23166

Capacity 12' x 7'6".
(2) 2 HP jump scoring.
(2) 15 HP tilting trim saws.
(4) 5 HP non-tilting floating scoring motors.
(4) 5 HP tenon motors.
(4) 7-1/2 HP.
7200 RPM tilting single pivot air jump for corner radiusing on leading edges & trailing edges.
(1) DADO/router beam with timing disc - equipped with (6) 5 HP jump DADO units and (2) high speed router heads variable speed on feed...

View Specifications >

		Learn about Machines of Interest to Me >

SILVER [SMX3820] - DOUBLE END TENONER, 6 HEAD

Inventory #23225

Capacity length 250 mm to 2000 mm.
Width 20 mm to 200 mm.
Thickness 5 mm to 85 mm.
4 HP stepless variable feed speed 4.25-17.3 m/min.
Top hold down by rubber track belt.
Consist of end scoring, end cutting and milling unit on each side, (1 + 1) end scoring with 30 mm spindle 4 HP, (1 + 1) cutting unit with horizontal spindle 40 mm diameter with 7.5 HP motor, 7600 RPM, top/bottom, (1 +1) milling unit with horizontal fixed spindle 40 mm and 10 HP motor 7500 RPM.
Sealed safety hood.
Active pressure feed.
Spindle adjustment display.
Digital Control for width adjustment (w/ 2 HP motor)...

View Specifications >

		Learn about Machines of Interest to Me >

MEREEN JOHNSON [MJ-400] - DOUBLE END TENONER

Inventory #25174

Capacity Chain & race less than 1 year old.
Right side fixed.
All spindles are 1-1/4" diameter.
Spare working units available for most stations.
First station: 3 HP Trim saw with jump scorer.
Second station: top & bottom tenon tilting 5 HP.
Third station: cope tilt.
Fourth station: cope jump.
Fifth station: cope jump.
Sixth station: top dado bar with 4 routers.
144" Opening.
Auto lubrication chain.
Top beam non-powered with belts.
Controller...

View Specifications >

		Learn about Machines of Interest to Me >

JENKINS [14605] - 6 STATION - 8' DOUBLE END TENONER

Inventory #25310

Capacity 8' maximum opening, opens right and left from center.
Variable speed feed.
7.5 HP tilt trims.
5 HP tenon/score.
7.5 HP tilt tenon.
5 HP cope.
5 HP belt sander.
Dogs on 32" centers (can be 16" center).
Six dust ports per side approx. 16" diameter manifold inlet.
Chan and race in good condition...

View Specifications >

		Learn about Machines of Interest to Me >

MEREEN JOHNSON [620] - DOUBLE END TENONER

Inventory #25311

Capacity single column, two stations.
Trim saw, coping station.
Right hand fixed, left hand adjustable.
48" loading zone, opens to 96" wide.
Trim station, overhead mounting, 5 HP, 3460 RPM, 1 1/4" diameter arbor.
Cope station 7 1/2 HP, 3460 RPM, 1 13/16" diameter arbor, 4" usable shaft lenth, Pro Scale readouts on vertical adjustment.
1 HP traversing drive.
1 1/2" wide chain, 2 1/2" pitch padded top (new pads).
Total HP 29.
Variable feed speed.
Non powered rubber padded pressure beam hold-downs.
Pedestal controls.
Some snap-in dogs available...

View Specifications >

		Learn about Machines of Interest to Me >

PROGRESSIVE [DOUBLE END] - DOUBLE END TENONER

Inventory #25299

Capacity 76" Opening.
54" Loadspace.
Rubber padded feed chain track.
Dogs on 10" centers.
Upper rubber padded holddown chains.
(2) Bottom jump scoring units in the first station.
3 HP With (2) top scoring units in second position 3 HP.
(2) Trim saw units in third position 5 HP.
(2) 10 HP Jump high speed cope units in the fifth position.
5 HP.
(2) 10 HP high speed cope units in the sixth position.
5 HP Variable speed feed.
Accurate technology proscale units on all horizontal axis.
Apple MAC OS operating system for automatically setting up some of the tooing units through servo motors.
Dust manifold...

View Specifications >

		Learn about Machines of Interest to Me >

CELASCHI - 14 HEAD DOUBLE END TENONER

Inventory #25322

Capacity 1st head trim.
2nd top and bottom.
3rd top and bottom.
4th - 13" cope stack.
5th - 17" cope stack.
6th - 17" cope stack.
7th - Angler gain 1 1/4" vertical and 45° bevel.
96" opening.
All heads have Seiko counters...

View Specifications >

		Learn about Machines of Interest to Me >

JENKINS - DOUBLE END TENONER

Inventory #25356

Capacity 1st Station: 2 HP trim saw.
2nd Station: 10 HP Universal cope.
3rd Station top 7-1/2 HP tenon, 3rd Station bottom 10 HP universal cope.
Ten foot powered opening.
Machine wired 460...

View Specifications >

		Learn about Machines of Interest to Me >

FLETCHER TOLBERT [FM250D] - DOUBLE END TENONER WITH SANDING

Inventory #25477

Capacity 1-3/4" Wide rubber type feed chain.
Flip up dogs every 5".
Top caterpillar rubber padded hold down chain.
52" Infeed load space.
3" x 80" Right hand fence.
Approx 72" max. part width cap.
7.5 HP.
1 Station: left & right hand tilting adjustable height trim saws.
2 Station: left hand & right hand top & bottom tilting tenoner heads.
3 Station: left hand & right hand tilting high speed shaper heads.
4 Station: left hand & right hand tilting sanding heads with variable speed controls hydraulic feed works with free standing.
15 HP Hydraulic pump and tank Proscale electronic digital readout displays on 2 and 3 and 4 stations.
Electronic digital displays for 1 station.
Motorized raise and lower of hold down bar.
Swing arm operator control station with push button controls.
Electronic digital readout display for width control.
Includes extra high speed jump cope heads and parts on pallet...

View Specifications >

		Learn about Machines of Interest to Me >

J P MACHINES [4HTS430] - DOUBLE END TENONER

Inventory #25461

Capacity hopper magazine and digital mechanical indicators for fast and accurate setup.
Electronic Keypad to open and close the machine to the desire size.
Two saw motors 4 HP direct drive 3600 to 6000 RPM 600 VAC.
Saw diameter 200 mm, 30 mm bore.
Two shaping heads direct drive 4 HP each adjustable speed up to 6000 RPM Shaping head adjustable on Z and X axis.
Shaping diameter 200 mm.
30 mm.
Linear bearings on moveable opening and closing side of the machine.
Precision Linear bearings on the pusher.
Minimum working length 5 "Maximum 36" (other sizes available upon request).
Minimum working width 1", Maximum 6".
This machine was only run for testing but never used for production...

View Specifications >

		Learn about Machines of Interest to Me >

MEREEN JOHNSON [MJ 400] - DOUBLE END TENONER

Inventory #25559

Capacity 144" Opening x 80" load space.
Double vee 2-1/4" wide padded chain.
Two (2) tilting trim saws, 10 HP 3600 RPM, Four (4) Tenon head motors: 5 HP tilting via worm gear, Two (2) tilting copes, 15 HP Two (2) hi-speed jump copes, 10 HP.
Dado beam with four (4) 2 HP 14000 RPM jump router motors.
Hydraulic feed system.
Rubber padded holddowns.
2 HP Traverse motor panel.
Control panel...

View Specifications >

		Learn about Machines of Interest to Me >

GREENLEE [545] - 3 HEAD 96" DOUBLE END TENONER

Inventory #25767

Capacity 96".
51" Load space.
Top pressure holddown.
Motorized open/close (1 HP).
Head configuration: (2) 7.5 18 Amp, 3470 RPM Extended tilting cut-off (1" arbor, max. 12" blade).
(4) 5 HP 15 Amp 3480 RPM Tenons (1-15/16" arbor).
(2) 5 HP 15 Amp 3480 RPM Tilting copes (1-1/4" arbor).
10 HP Jump dado.
3 HP Feed motor.
Corrugated feed chain with dogs spaced (min.) 16".
Prewired for scoring saws.
Provided with dust manifold...

View Specifications >

		Learn about Machines of Interest to Me >

SILVER [SFX-3825] - 12 HEAD DOUBLE END TENONER

Inventory #26092

Capacity 6 heads per side.
Motorized opening min. 7-1/2" to max. 98".
Depth 5 to 85 mm.
2 motors 4 HP scoring.
2 motors 7.5 HP main.
2 motors 10 HP profiles heads.
1 motor 4 HP.
1 motor 2 HP for opening.
Variable feed speed 5.5 to 17.3 m/min.
9000 RPM.
Motorized belt on top.
Dimensions 122" x 174" x 50".
Sound enclosure.
Digital counters for spindle adjustment...

View Specifications >

		Learn about Machines of Interest to Me >

FRIULMAC [DUALFEED] - 60" DOUBLE END TRIM MOULDER

Inventory #26400

Capacity 60".
Trim saws: 4.8 kW, 3 Phase.
Hydraulic pump motor.
2.64 kW.
Working measures: length min. 260 mm, Length max. 1300 mm, Width min. 30 mm, Width max. 110 mm.
Thickness min. 15 mm.
Thickness max. 80 mm.
Cut-off unit: S Saw Blades diameter 400 mm.
Motors capacity: cut-off unit (1+1) 8.00 kW.
Hydraulic unit 2.20 kW2.
Movable shoulder shifting 0.15 kW.
New in 2002...

View Specifications >

		Learn about Machines of Interest to Me >

HOMAG [FL 20/06/25/II+ 500] - DOUBLE END TENONER NC CONTROLED

Inventory #26444

Capacity with opening of 3050 mm (120").
Workpiece overhang max. 110 mm.
Workpiece thickness 8 - 90 mm.
Working height to upper chain 950 mm.
Working with double sided min.
220 mm.
Variable speed feed from 10 to 40 meter/min.
Extended infeed fence with NC positionning.
Infeed device with 10 rollers with electropneumatic tilting.
Central support with automatic adjustment.
Pre-scoring unit with 2.2 kW motor.
Hogging unit with 8.1 kW with stepless axis adjustment.
Trimming column with 2 guides.
Pre-scoring unit with 2.2 kW motor.
Hogging unit with 6.6 kW motor with stepless horizontal axis.
Trimming column 2 guides.
Standard trimming unit 4.5 kW 100 cyc.
6000 RPM with pneumatic jump control and stepless horizontal and vertical and swiveling axis.
Intermediate transport at outfeed.
Electronic width and height adjustment.
Network ethernet system with TCP/IP enable the machine to be connected with network Ethernet.
Transmission speed 10Mbit/sec.
Maximum network length 100 meters.
Homatic control NC 121 with graphic surface, hardware industrial computer 68040 with 15 Mbytes RAM, 1 PCMCIA hard disk 170 Mbytes, software with real time operating system OS9 with Windows surface.
Bar code control.
Bar code reading device hand scanner Datalogic DL 910 with decoder for translating bar code information from a label .
Voltage: 575/3/60. reader.
Network ethernet system.
Homatic control...

View Specifications >

		Learn about Machines of Interest to Me >

TORWEGGE [H 733.5 + 11 FOR PVAC GLUE] - DOUBLE-END TENONER/DGE BANDER

Inventory #26860

Capacity For Solid lumber up to 3/4".
Working width: 2,600 mm / 102".
Feed speed 0 - 36 m/min., 0 - 118 FPM.
Feed motor: 7.5 - 15 kW , 10 - 20 HP.
Thickness of edgebanding: min. 10 mm, 3/8", max. 64 mm , 2-1/2".
3 x Extension of front loading section for approx. 1,500 mm / 60" workpiece length.
Double sided DC - drive / 2 x 7.5 kW.
Working motors: column rear side: 3.0 HP scoring saws from above 90 cycles, 5,400 RPM with jump attachment.
Second column front side: 8.5 / 11.5 HP cut-off motors 60 / 90 cycles.
3,600 / 5,400 RPM 35 mm spindle diameter.
Third (main) column: front side: 8.5 / 11.5 HP cut-off motors 8.5 / 11.5 HP cut-off motors 60 / 90 cycles, 3,600 / 5,400 RPM 35 mm spindle diameter.
Third (main) column: 6.0 / 8.5 HP milling motors 60 / 90 cycles.
3,600 / 5,400 RPM 40 mm spindle diameter.
Third (main) column: rear side: 60 / 90 cycles.
3,600 / 5,400 RPM 90°s tiltable.
35 mm Spindle diameter.
Frequency transformer 60 / 90 cycles, 3,600 / 5,400 RPM, 60 kva.
Secondary 600 Volts.
Edge banding section: Height of strips: 45 (65) mm, Thickness of strips: 0.5 mm, min. length: 350 mm eight of solid lippings: 45 mm, Thickness of solid lippings: 30 mm, min. length: 500 mm, Second carrier beam: Pressure section for strips.
Pneumatically controlled pressure rollers.
For installation below turret pressure section.
11 Pressure rollers.
Third carrier beam: end trimming unit on angular guidances for straight cuts or chamfering motors each 0.75 kW, 300 Cycles.
165 Volts.
18,000 RPM, With lateral feeding device.
Top and bottom rough trimming units up to 25 mm motors each 2 kW, Tools 70 x 20 x 20.
4 teeth.
Rebate / Groove / Profile shaping motors, Motor tiltable: working from top, Bottom or vertically, Laterally and horizontally adjustable, with pneumatic jump attachment.
Motor 3.0 kW.
300 cycles.
165 Volts.
9,000 RPM.
Motor spindle: 30 mm diameter.
Profile copying units from top.
2 Motor tracing, Vertically and horizontally adjustable.
Motor each 2 x 0.5 kW.
300 cycles.
18,000 RPM, Thickness of banding: max. 5.0 mm (wood), Thickness of workpiece: max. 45 mm.
Belt sanding units, Two belt speeds.
Oscillating devices.
Frequency transformer.
200/300 cycles.
40 KVA...

View Specifications >

		Learn about Machines of Interest to Me >

GREENLEE [545] - 96" X 48" DOUBLE END TENONER

Inventory #27139

Capacity 96".
Load space 48".
Top pressure holddown.
Motorized open/close (1 HP).
Head Configuration: (2) Tilting cut off 5 HP.
(4) Scoring saws 2 HP.
(4) Tenons 5 HP.
(2) Copes: 5 HP.
Jump dado: 7.5 HP.
Feed Motor: Approx. 3 HP.
Corrugated feed chain with dogs spaced (min.) 16".
Provided with dust manifold...

View Specifications >

		Learn about Machines of Interest to Me >

CELASCHI [TSA 360 C] - 12 HEAD DOUBLE END TENONER

Inventory #27162

Capacity 2500 mm x 550 mm (98 in x 22 in).
Motorized double end tenoner.
Single frame floor support base and ancilliary side beams for additional support.
5.5 HP variable speed feed works with feed speeds of 10 to 60'/min.
Top driven belt pressures.
Three vertical columns with (5) useable slide ways per side.
Digital readout displays for positioning on all heads.
The Unit will run direct on 460 Volt // 3 Phase // 60 Hz at approx 18 percent faster speeds.
Transformer (approx 75 KVA) required for operation on 230 Volt // 3 Phase // 60 Hz current.
Head sequence: (2) L&R 1.5/2 HP jump scorers, (2) L&R 5.5/9 HP hogging heads or cut off saws, (2) L&R 1.5/2 HP independent top scorers, (2) L&R 8.8 HP 6000 RPM auto jump shapers/cope heads with 230 mm (9") long spindles, (2) L&R 8.8 HP 6000 RPM stationary shapers/cope heads with 230 mm (9") long spindles, (2) L&R 2 HP disc wheel sanders with automatic wear recovery...

View Specifications >

		Learn about Machines of Interest to Me >

GABBIANI [TMK 72/2600] - 12 HEAD MOTORIZED DOUBLE END TENONER

Inventory #27165

Capacity 102" x 20".
Heavy duty twin base arrangement.
Disappearing pop up dogs.
Top driven hold down pressures with motorized raise and fall.
CNC Digital width/opening adjustment.
55 kW (75 HP) Inverter to run all heads at high speed (saws.
Shapers and routers).
Head sequence: (2) 2 HP (right and left) jump scoring saw motors, (2) 7.5 HP (right and left) tilting hogging/trim motors, (2) 7.5 HP (right and left) tilting jump cope motors, 2) 7.5 HP (right and left) tilting jump cope motors, (4) 5 HP jump router motors mounted on top/overhead beam, (2) on front and (2) on rear of beam slide ways Complete walk-in type safety/sound enclosure covering all motors and heads, The unit will operate direct on 460 // 3 // 60 running approx 18 percent faster on feed speeds and spindle RPM, Transformer (approx 75 KVA) required for operation on 230Volt // 3Phase // 60 Hz current...

View Specifications >

		Learn about Machines of Interest to Me >

SCMI [CONCEPT 2000] - 10 FT. 8 HEAD DOUBLE END TENONER

Inventory #27166

Capacity Working width 3"-122".
Max. thickness 7".
10-60 FPM Variable speed feed.
Disappearing spring loaded dogs.
Head Sequence: Station 1: 10 HP, DMD.
Left and right tilting trim saws with CT trim blades and shaving hoods.
Station 2: Top and bottom, left and right, 6.6 HP Tilting tenon heads.
Station 3: 12 HP, left and right, Hi-speed Jump cope spindle, with shaving hoods.
Station 4: 10 HP Hi-speed tilting cope spindle with shaving hoods (cope spindles are 40 mm in diameter).
All stations have mechanical digital read-outs.
Top and bottom tenon heads and cope heads can be reversed at control panel.
Digital programmable open and close of moveable beam at control panel with LED read-out and memory.
Over-thick safety shut-off switches at infeed.
Remote set-up pendent with pigtail docked at control panel.
All motors are TEFC.
Fully motorized hold-down beams.
Mechanical infeed alignment fence with mechanical digital read-out.
Excellent selection of tooling including at least (6) carbide insert.
Disc type cope heads.
CT saw blades.
Tenon heads.
Etc.
Dust Collection manifold.
Includes spare parts, CD, tools and wrenches.
Machine is in excellent overall condition...

View Specifications >

		Learn about Machines of Interest to Me >

SCM [CONCEPT 2000] - 12 HEAD DOUBLE END TENONER

Inventory #27327

Capacity 122" (3100 mm) working width (max.).
7-3/32" (180 mm) working height (max.).
37" (940 mm) work surface height.
15-3/4" (400 mm) distance between workpiece referencing stops.
Workpiece feed motor 2.5 HP.
12 heads, 6 on each side.
Sound enclosure...

View Specifications >

		Learn about Machines of Interest to Me >

TORWEGGE [H636] - DOUBLE END TENONER 108" OPENING

Inventory #27434

Capacity 108" max. motorized opening.
60" front loading area, chain dogs every 36", air controlled "panel hold-back" feed rollers.
1st Column Front: (2) Jump score units 2.5 HP each.
(2) trim/hogging units jump type.
8.5 HP motor each, 3,600 and 5,400 RPM, 40 mm diameter x 120 mm long spindles.
NC controlled for (1) axis.
1st Column Rear: (4) top and bottom tennon.
6 HP motor each, 3,600 and 5,400 RPM, 40 mm diameter x 120 mm spindle length, NC controlled for (1) axes.
2nd Column front: (2) 11.5 HP Cope heads, 3,600 and 5,400 RPM, with stack spindles, 270 mm usable spindle with (2) axes NC control.
2nd Column rear: (2) 11.5 HP Cope heads, 3,600 & 5,400 RPM, with stack spindles.
270 mm usable spindle with (2) axes NC control.
Special corner shaping units, "Electronic Line Control" (replaces all standard limit switches) for all jump type operated units.
NC control with tape cassette for program memory and CRT screen.
Memory for (128) fixed width / height dimensions with NC control of trims, copes, tilting copes and tenons.
Variable feed speed 0 - 92 FPM (double sided DC drive), 6" max. opening, 8-1/4" min. panel width, 4-3/4" min. width used as a single side.
C/W: Full sound enclosures, central dust extraction, automatic lubrication of feed chain, drive shaft and drive gear...

View Specifications >

		Learn about Machines of Interest to Me >

GABBIANI [SI 64/1660] - 8 HEAD DOUBLE END TENONER

Inventory #27764

Capacity max. working width 3000 mm.
Min. working width 220 mm.
Chain track of 80 mm.
Max. working height 120 mm.
Left hand fixed beam, right hand movable beam.
Feed stepless speed adjusting from 6 to 36 m/min.
Top pressure beam with rubber belts.
Independent electrical cabinet.
Sound and protection enclosure "CE".
(1) central support for large panels (fitted in the middle of the machine bed).
SMSTP/1-2/13 Siemens numerical control (touch panel version).
(2) 471R jump scoring saws with 1.4 kW (2 HP) motors.
(2) Hogging units with 7.35 kW (10 HP) motors.
(2) jump milling/moulding units with 4 kW (5.5 HP) motors.
(2) 480R tiltable pneumatic jumping device.
(2) fixed milling/moulding units with 5.5 kW (7.5 HP) motors.
(1) 45 kW, 93.5 Amp inverter...

View Specifications >

		Learn about Machines of Interest to Me >

CHALLONER [CHALLONER/WISCONSIN AUTOMATION C900] - 2-PASS DOOR/PANEL LINE

Inventory #27711

Capacity - two tenoners equipped with trims, stackable cope and sanding heads.
1st pass equipped with 90" max. motorized opening with LED readout, 56" infeed in front of holddowns, left side fixed, right hand fence with hand wheel adjustment.
Each side equipped with: 1st station, trim/hog head (non tilting), 7.5 HP.
2nd station - high speed tilting cope head and 5" stackable tooling capacity, 10 HP motor.
3rd station disc/rotary tilting sanding head, 15" diameter disc capacity, variable speed control with LED readout for disc RPM.
Variable feed drive approx. 30-90 FPM, 3 HP drive with LED speed indicator, V style chain design with flip up dogs on 16" centers, rubber top chain pads, non-driven overhead holddowns with continuous belt holddown, 22" outfeed with finger conveyor belts feed to a 90° transfer.
Transfer to 2nd pass tenoner, 98" x 48" automatic transfer system designed for feeding/transfering small parts with close spaced driven pop-up belts and small diameter driven rollers, fixed side spacing starts with 2" centers for the 1st (4) belts and rollers.
2nd tenoner on the left with left side fixed, 74" max. motorized opening with LED readout, 56" infeed in front of holddowns with powered infeed finger belt conveyors from the transfer unit, right hand fence with hand wheel adjustment...

View Specifications >

		Learn about Machines of Interest to Me >

HOMAG [FL022] - DOUBLE END TENONER

Inventory #24253

Capacity hogging/ scoring and 2 milling heads.
Work piece width min. 190 mm, max. 2600 mm.
Work piece thickness min. 8 mm, max. 90 mm.
Work piece overhang min. 10 mm, max. 120 mm.
Total extraction capacity at 28 m/sec 6400 m3/h.
Feed 5 to 25 m/min...

View Specifications >

		Learn about Machines of Interest to Me >

WADKIN [EKA] - 5 HEAD TENONER

Inventory #25651

Capacity 5 heads.
Top and bottom tenon.
Top and bottom scribe Saw.
Motor power for tenon heads 3 HP.
Motor power for scribing heads 2 HP.
Max. tenon length 152 mm in one cut.
Max. timber thickness 150 mm.
Length of table 1067 mm.
Reconditioning includes DC braking and modern disposable tip tooling to tenon heads, regulation guarding.
Top and bottom tenoning heads have individual adjustment for the production of various joinery components, including open end mortising, scribing and square turning...

View Specifications >

		Learn about Machines of Interest to Me >

FRIULMAC [FLOORMAT EQ 004] - DOUBLE END TENONER

Inventory #28388

Capacity max. working width 2000 mm (78").
Min. working width 195 mm (7.8").
Max. thickness 45 mm (1.77").
Max. feed speed 25 m/min. (82'/min.).
2 scoring units, 2 trim saw units, 2 moulding units.
Automatic loading.
Sound enclosure.
Programmable control positioning...

View Specifications >

		Learn about Machines of Interest to Me >

MEREEN JOHNSON [660] - 14 HEAD DOUBLE END TENONER

Inventory #28389

Capacity: 60" opening x 72" load space.
Needle bearing chain 1-3/4" wide.
Snap in feed dogs on 4" centers.
(2) Tilting trim saws 15 HP each, (4) Scoring saws 5 HP each, (4) Tenon heads 5 HP each, (2) Tilting copes 15 HP each, Open Station, (2) Long belt sanders 1 HP each.
Feed Motor 7.5 HP variable speed.
Rubber padded holddowns.
Machine mounted sound enclosure...

View Specifications >

		Learn about Machines of Interest to Me >

FRIULMAC [FN-5-1800] - DOUBLE END PROFILER

Inventory #29035

Capacity min/max workpiece length 150/1800 mm.
Min/max workpiece width 20/150 mm.
Min/max workpiece thickness 10/35 mm.
Cycle speed 50/60 pieces/min.
Max. opening 1800 mm.
With hydraulic feed.
Equipped with 3 + 3 working units.
Each unit with 2.2 kW motor.
Total installed motor power 15.4 kW.
Suitable for processing end-cut and shaping of parquet.
Suitable for Venetian door components and clad parts.
Speed of the workpiece pushers can be set independently for forward and backward movements.
This is a small double end tenoner for high production but for lighter jobs.
Come with hopper . feed...

View Specifications >

		Learn about Machines of Interest to Me >

FRIULMAC [CONTOURAMAT 008] - DOUBLE END TENONER

Inventory #29345

Capacity Workpiece length 180-1000 mm.
Workpiece width 30-250 mm.
Workpiece thickness 12-50 mm.
Feed speed 0.45 kW.
Spindle motors scoring unit 2.2 kW.
Spindle motors trimming unit 2.2 kW.
Spindle motors profiling unit 3 kW.
Spindle diameter for scoring /trimming unit 30 mm.
Spindle diameter for profiling unit 40 mm.
Tooling diameter for scoring unit 125-150 mm.
Tooling diameter for trimming unit 125-180 mm.
Tooling diameter for profiling unit 160-220 mm.
Overall dimensions:3200x2500x1520 mm and 300x520x1110...

View Specifications >

		Learn about Machines of Interest to Me >

HOMAG [NFL 26/4/30] - DOUBLE END TENONER

Inventory #29467

Capacity .32 - 3.6" (8-90 mm) thickness.
7.6 - 104" (190-2600 mm) opening.
54" (1350 mm) load space.
2 1/4" wide chain with pop-up feed dogs, 38" between.
Station 1, (2) jump score, (2) tilting trim saws 3 HP with trim hogger 6 HP and 9 HP each.
Station 2, universal jump cope 6 HP, 9 HP each with 35 mm x 2 1/2" arbor.
Station 3, universal jump cope 6 HP, 9 HP each with 36 mm x 2 1/2" arbor.
Feed motor 1.4 HP variable speed.
Driven rubber belt holddowns.
Mounted sound enclosure with infeed guide on the left side...

View Specifications >

		Learn about Machines of Interest to Me >

J P MACHINES [2HTS480] - DOUBLE END MINI TENONER CUT SIZER

Inventory #29583

Capacity hopper magazine and digital mechanical indicators for fast and accurate setup to desired size.
Two saw motors 4 HP direct drive 3600 to 6000 RPM 600 VAC.
Saw diameter 200 mm, 30 mm bore.
Linear bearings on moveable opening and closing side of the machine.
Precision feed chain with dogs to receiving end Minimum working length 7" Maximum 48" (other sizes available upon request).
Minimum working width 1", Maximum 6...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.