Jointers

Site Languages:

Credit Cards Accepted:

FEATURED PRODUCTS

FEZER [JAT28 MF] - 2800 MM CROSS FEED SPLICER...

ACTIVA [ALVS] - LONGITUDINAL VENEER SPLICER...

ACTIVA [AVS] - VENEER ZIG ZAG STITCHER...

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

DIEHL [VS-81] - VENEER SPLICER

Inventory #9471

Capacity table size 76" x 100".
1-1/2 HP feed motor - variable approx. (15-100 FPM).
Matching rolls and feed chains hold veneer strips flat.
Two chrome plated heater bars (approx. 9000 Watts) upper and lower temperature controls (200-550°s) for heater bars.
Throat - 42".
Handles stock from 1/64" thick.
Min. length is 6".
Stock guide.
Manual raise/lower upper pressure chain with handwheel.
New heating element.
New track 5 years ago and only used 1 year since...

View Specifications >

		Learn about Machines of Interest to Me >

DIEHL [VS-81] - VENEER SPLICER

Inventory #15263

Capacity stock min. thickness 1/64".
Min. length 6".
Max. width to right 42".
Variable feed speed 15 - 85 fpm.
Feed motor 1-1/2 HP.
Heating elements 9,000 watts.
Magnetic push button control.
Thermal over/under Voltage motor protection.
Thermostat control for heater bar.
14-75 stitches/min...

View Specifications >

		Learn about Machines of Interest to Me >

DIEHL [VS-81] - VENEER SPLICER

Inventory #19983

Capacity 1/64" thickness and 6" min. length.
Up to 42" width.
1.5 HP motor with variable feed speed from 15-85 FPM.
Start/stop push buttons for feed motor.
Digital thermostatic controls for upper & lower heater bars (200-500°s).
Overload and under Voltage protection...

View Specifications >

		Learn about Machines of Interest to Me >

KUPER [FWQ 2800] - ZIG ZAG VENEER SPLICER

Inventory #19982

Capacity max. working width in grain direction 2800 mm.
Minimum working width in grain direction 900 mm.
Max. joined across grain 1900 mm.
Minimum joined across grain 200 mm.
Max. thickness of veneer 2.5 mm.
Min. thickness of veneer 0.25 mm.
Total power 8Kw.
Feed speeds of zig-zag gluing head 40 or 60 m/min.
Integral clipper to cut pre selectable dimensions.
Width of veneers across the grain from 65 mm.
The veneer strips are pulled together along the cut edges by two opposite-rotating friction shafts.
These are tightly joined with a special Kuper glue thread.
The veneers are transported through the machine across the grain and spliced together to an endless sheet.
An integrated clipper cuts the sheet to sheets of preselected length.
Which are then automatically stacked in a stacking unit set up behind the Zig-Zag-Crossfeed-Splicer for further process...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [AVS] - VENEER ZIG ZAG STITCHER

Inventory #20735

Capacity veneer stitcher with adjustable Zig Zag, throat capacity 920 mm, max. thickness 0.4-2 mm, jointing speed 15m/min., main motor 0.18 kW.
Heater 0.3 kW.
Total power 0.5 kW, the hot melt thread is applied in a longitudinal zig zag pattern across the splice line with the veneer pulling the thread through the heater to activate the glue, foot pedal operation, operation manual and parts list included...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [ALVS] - LONGITUDINAL VENEER SPLICER

Inventory #21535

Capacity minimum veneer strip length 300 mm / 11.8" - unlimited length.
Thickness of veneer in some cases depending on kind of veneer 0.3 - 3.0 mm / 0.012 - 0.12".
Veneer strip width 45 - 1200 mm / 1.77 - 47.25".
Moisture content 8 - 15%.
Throughput speed 10 - 35 m/min. / 33' - 115'/min.
Length of heating zone 1000 mm / 39-1/3".
Heating zone uses approximately 3 kW of power.
Heating temperature 100 to a maximum of 250°s C / 482°s F.
UREA or PVAC based glue.
Working height approximately 36".
Average energy consumption 3 kW.
Also requires air hook up...

View Specifications >

		Learn about Machines of Interest to Me >

FEZER [JAT28 MF] - 2800 MM CROSS FEED SPLICER

Inventory #23136

Capacity for maximum width 2800 mm (110").
Total heated length 2800 mm.
Veneer thickness .6 to 3 mm.
Minimum veneer width 80 mm.
Infeed speed 0 to 45 meter/min.
Outfeed speed 0 to 60 meter/min.
Slow speed 0 to 15 meter/min.
Width of heating plate 113 mm.
Adjustable working temperature from 100 to 200° C.
Splicing pressure 5 to 16 bar.
Installed heating power 18 kW.
Heating time 12 minutes.
Total installed power 23 kW.
Built-in hydraulic unit with air cooler to keep temperature rising above recommended limits.
Built-in clipper with hydraulic command.
Knife cutting against a rotating roll.
A protection valve is installed in the hydraulic circuit in order to prevent movement of knife during maintenance.
A counter in the front of the machine shows the number of cuts.
Stainless steel heathers independently fed by an electronic controller.
Automatic sheet alignment after every cut of the clipper which allows the operator to keep feeding the machine automatically without need for opening the bar to promote alignment by hand.
Easy operating controls for access of setting the working temperature and splicing pressure and time.
Front table are made of steel with chromium plating.
Front protection of operator by means of photo-cell wich block pressure beam operation...

View Specifications >

		Learn about Machines of Interest to Me >

FISHER RUCKLE [EFA 28] - VENEER JOINTER 2780 MM

Inventory #24017

Capacity for jointing and gluing of both veneer edges on single veneer sheets in a continuous operation.
Working height 36".
Veneer strip length 420-2780 mm.
Veneer strip thickness 0.8-6 mm.
Veneer strip width 60-800 mm.
Machine C/W electric motors and normal accessories.
Without chip exhaust system.
With one set of cutters.
Incl. refrigerated glue pots.
As per enclosed leaflet and technical description.
Freight and installation not included in price...

View Specifications >

		Learn about Machines of Interest to Me >

DIEHL [890] - VENEER SPLICER

Inventory #25498

Capacity manual.
Chain feed.
Feed motor 1 1/2".
3 PH.
Reeves variable (15 to 85 FPM).
Matching rolls feed jointed strips of veneer past pressure bars.
Then heat above and below sets the glue.
Dial temperature control for heater bars.
Table size 100" x 77".
Throat approx. 40".
66" long knurled.
Driven outfeed roller at end of table.
Robert Shaw thermostats.
Heating elements 9000 watts total.
Min. thickness 1/64".
Min. length 6".
Max. width to the right 42...

View Specifications >

		Learn about Machines of Interest to Me >

KUPER [FW1150] - ZIGZAG VENEER STITCHER

Inventory #26809

Capacity Stiches veneers from 0.4 - 2.2 mm (0.015" -0.09") thickness.
Throat depth 45-1/4".
0.55 kW Feed motor with variable feed speed from 33 - 98 FPM.
Table size 59" x 25".
Standard III/K built-in hot air heating tube.
Glue applied in zigzag fashion via heated guide.
Foot pedal activated.
Joins decorative and constructional veneers...

View Specifications >

		Learn about Machines of Interest to Me >

KUPER [FWJ920] - 36" ZIG-ZAG VENEER STITCHER

Inventory #27761

Capacity 36" Throat.
Zig-zag stitcher.
In working order.
Includes drive belts, Thread, Heater bar.
Veneer thickness range 0.4 mm to 2 mm, With adjustable feeding speed from 10 to 30 m/min...

View Specifications >

		Learn about Machines of Interest to Me >

KUPER [FWJ920] - 36" ZIG-ZAG VENEER STITCHER

Inventory #27763

Capacity 36" Throat.
Zig-zag stitcher.
In working order.
Includes drive belts, Thread, Heater bar.
Veneer thickness range 0.4 mm to 2 mm, With adjustable feeding speed from 10 to 30 m/min...

View Specifications >

		Learn about Machines of Interest to Me >

DIEHL [VS-81] - TAPELESS VENEER SPLICER

Inventory #28462

Capacity 1.5 HP.
Variable speed feed ratiotrol from 0-8- (bottom gear).
Table 76.5"L x 113"W x 26-3/4"H.
Transformer 5 KVA, Primary 280 // 480, Secondary 120 // 240.
Complete service by Diehl on 1/25/10, 5 Hours operating time since.
Hot melt glue.
Includes 1 case hot melt...

View Specifications >

		Learn about Machines of Interest to Me >

KUPER [FL/INNOVATION] - INLINE SPLICERS

Inventory #29482

Capacity throat depth 1250 mm.
For the longitudinal joining of flat veneers from about 0.3 to 2.5 veneer thickness approx 0.3 to 2.5 mm.
Veneer length from approx 500.
Veneer strip width from approx 45 mm.
Feed speed approx 20 - 50 m/min.
Length of heating zone 1200 mm.
Heating temperature approx 220 C.
Total connected load approx 9.3 KVA.
Average power consumption approx 5 kW.
For the longitudinal joining of flat veneers from about 0.3 to 2.5 mm thickness.
Specially developed for the joining of veneers.
Which are exposed to high temperatures and tensions during the further processing (e.g. wrapping or membrane-press technology).
These veneers are spliced with urea-glues applied to the edges.
This glue-application can be done with the pregluing machine or with the pre-gluing device integrated in the FL/Innovation.
Integrated glue-application.
Solid steel C-base contruction.
Resistant PUR paint.
Disc-drive in feed.
Stainless steel chain transport.
Chain transport by solid spur gear with drive shafts.
Especially long.
Individually powered heating zone.
Movable operating panel for control of all main operating elements...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.