Online Catalog - Recently Added (Within The Last Month)

Site Languages:

Credit Cards Accepted:

Price Range:

Age Range:

Condition:

Manufacturers:

Page 1 of 12

<< First Page | < Prev. Page | Next Page > | Last Page >>

L-M EQUIPMENT COMPANY [HMPC-7-24] - 7' TRAVELING ARCH SAW

Inventory #28008

Capacity 48" high x 52" wide x 18' long max. package cross cut saw.
Steel guide arch w/ rigid bottom mounting support.
15 HP TEFC electric saw motor.
2 HP hydraulic unit motor.
Hydraulic controls for saw cutting and cut positioning.
Heavy duty steel construction.
7' DE satellite inlaid saw bar.
Automatic saw chain lubrication system.
Standard .404 pitch saw chain w/ 5/16" kerfs.
Safety shields for operator protection.
Laser light to indicate saw cut position.
Electronic digital length measurement.
Extras included: (1) additional carbide tip cutting chain (new),(2) additional carbide tip cutting chains (used).
(2) new belts.
Wiring from machine to electrical source.
Bought new in...

View Specifications >

		Learn about Machines of Interest to Me >

DUSENBERY [635 BL DUPLEX] - 45" DUPLEX CENTER SLITTER

Inventory #28007

Capacity 45".
Drive System Components, Fincore DC drive.
7.5 HP.
Top riding roll capable.
Max. rewind diameter of 24" without top riding rolls, With top riding rolls is 21".
Duplex rewind with core spacer differential rewind tension control, All the slit roll have individual tension control.
Four zone individual tension control, You can run four different slit widths at the same time.
3" Rewind mandrels.
Trumeter predetermining footage counter.
Cork covered pull rolls.
Razor slitting.
Can be tooled for slit widths down to 1" wide.
32" Diameter integral unwind with Fife A-9 signal processor automatic edge guide control for line or edge guiding and a standard pneumatic brake.
1-15/16" Steel unwind shaft with 6" unwind chucks.
This machine was running production prior to remove.
Single Position Integral Unwind.
Max. uwind Roll Diameter of 32.
Manual pneumatic unwind braking.
Duplex differential rewind.
Max.
Rewind roll diameter of 24.
Slitting method razor.
This machine can run Paper, Film, Foil, Laminates...

View Specifications >

		Learn about Machines of Interest to Me >

DUSENBERY [635BF] - 45" SLITTER, 3" REWIND SHAFTS

Inventory #28010

Capacity 45" Width.
500'/ Minute max. speed.
18" Rewind diameter with top riding rolls, And 20" with out top riding rolls.
3" Aluminum rewind mandrels for core spacer differential tension control.
4 Zone tension control for running up to four different slit widths at the same time.
The 635BF is equipped with wrap shear cut (can be changed to razor or kiss shear) and shaft mounted male knifes.
Cork covered pull rolls and idlers.
New ride on predetermining footage counter.
30" Integral unwind stand with automatic edge guiding.
Fife P-25.
Edge only.
3" Unwind shaft.
Unwind edge guide side shift is +/- 1.5".
Around 1977...

View Specifications >

		Learn about Machines of Interest to Me >

DUSENBERY [635BL] - 45" SLITTER

Inventory #28006

Capacity 45" W.
500'/ Minute max. speed.
21" Rewind diameter with top riding rolls, 24" With out top riding rolls.
2" Chrome plated rewind mandrels for use with 2" x 3" core adaptors for extra fine rewind tension control, These are easily changed to 3".
Also 4 zone tension control for running up to four different slit widths at the same time.
The 635 is equipped with wrap shear cut (can be changed to razor or kiss shear) and shaft mounted male knifes.
Cork covered pull rolls and idlers.
New ride on predetermining footage counter.
The main drive for this machine has been up dated to a Seco SE 2000 3 HP DC.
30" Integral unwind stand with automatic edge guiding.
Fife P-25.
Edge only.
2" Unwind shaft with 2" x 6" chucks.
Unwind edge guide side shift is +/- 1.5".
Can be seen running...

View Specifications >

		Learn about Machines of Interest to Me >

REM [REM HPIM1073] - 24" DUPLEX CENTER SURFACE SLITTER/REWINDER

Inventory #28009

Capacity 24".
This machine was built in 1991 and can rewind a 24" to 28" diameter at 750 FPM.
It will run in a regular duplex or an automatic min. gap mode which is ideal for narrow slit widths.
A single motor drive runs the rewind shafts through two clutches.
We can set it up for either razor or shear slitting.
The integral unwind provides for a very small footprint with a pneumatic brake and edge guide.
This is an excellent all purpose slitter...

View Specifications >

		Learn about Machines of Interest to Me >

MEREEN JOHNSON [431-DC] - 31" GANG RIP SAW

Inventory #28015

Capacity 31" wide capacity on arbor.
75 HP direct drive main arbor motor.
3-1/2" thickness capacity.
(1) 31" capacity saw sleeve arranged for 3-1/8" bore 14" max. diameter tooling.
Powered raise and lower of saw arbor.
3 HP variable speed feed of 30 to 150 FPM; rubber faced slats with precision double-vee chains and track.
Oil mist lubrication of chain and track.
(4) 3" diameter air loaded overhead idle pressure rolls.
Mereen Johnson laser set-up Stand, Model MJ-7121 with operations manual...

View Specifications >

		Learn about Machines of Interest to Me >

RAIMANN [KM-310-1M] - 12" WIDTH, 50 HP GANG RIP SAW

Inventory #28014

Capacity 12 1/4" max. width.
13 1/2" chain width.
50 HP 4,200 RPM V-belt driven arbor.
(1) moveable blade.
Saw blades 4" sleever.
Reversible laser station for blade positioning.
Sawblade diameter 9 3/4" to 14" max. diameter.
Arbor diameter 65 mm (2 1/2") arbor.
3" max. depth of cut.
3 1/2" depth of cut without pressure shoe.
Manual thickness adjustment of upper holddown rolls with indicator scale.
6" throat depth to the right of blade.
3/4" min. strip width.
16" min. stock lenth.
Equipped with frequency controlled feed speed of 13-158 FPM.
2.2 HP feed drive, chain spikes every 3rd chain link, automatic chain lubrication, 4 sets of top and bottom anti-kickback fingers, extended infeed with additional bed roll and adjustable infeed fence...

View Specifications >

		Learn about Machines of Interest to Me >

XIN WANG [SEMI-AUTOMATIC] - 54" SEMI-AUTOMATIC CASH REGISTER ROLL SLITTER

Inventory #28011

Capacity 54" wide slitter.
This machine is semi-automatic, Automation includes, Auto tucker, Auto air blast, Auto start and stop at predetermined footage.
Included is a assortment of male and female shear knifes.
End of roll inker controlled through the footage counter.
The machine is controlled through a PLC for easy maintenance.
Max. speed of the machine is 1500 FPM.
Min. rewind core diameter of 7/8" OD.
The unwind can handle a 50" diameter master roll and has a mill roll lift built in the unwind.
The unwind brake is electric and is closed loop controlled.
Manual edge guide for lining up trimmed edge.
AC Drive...

View Specifications >

		Learn about Machines of Interest to Me >

ANDERSON [PTP-1360IP] - 5 AXIS CNC ROUTER

Inventory #28024

Capacity table size 1300 x 6000 mm table.
Moving bridge (stationary table).
15 HP HSK63F router head.
20 position automatic tool changer.
(8) pod and rail system.
(2) pneumatic pop up pins located at each end of X axis.
1 pop up pneumatic pin for each pod and rail system.
4 lifting plates to align the workpiece against pop up pin.
2 controls for vacuum clamping.
1 vacuum pump 250 CBM and 25.5" Hg.
2 independent vacuum zones.
Siemans AC digital servo motors on X, Y and Z axis.
Automatic oil lubrication.
2 suction pods for each pod and rail system.
Working stroke X= 5930 mm driven by rack and pinion, Y= 1730 mm driven by ballscrew, Z= 450 mm driven by ballscrew.
A axis +/_ 180 Degrees.
C axis +/- 270°s.
Rapid travel X= 55 M/min., Y= 60 M/min., Z= 25 M/min., B and C axis 170'/sec.
Rotation speed from 10,000 to 24,000 RPM.
2 HP multi spindle boring unit with 16 independently and selectable spindles for vertical boring and 2 spindles for horizontal boring.
Siemens CNC System 840D, fast corner function.
Voltage 208v,,220v, 240v, 460v, 480v, 575v, or 600v.
Approximate 86 Amp at 220 Volt,compressed air requirement 100 PSI- 3/4"connection...

View Specifications >

		Learn about Machines of Interest to Me >

DANTHERM [ NFK 5HJ-1BL] - 100 HP DUST COLLECTION SYSTEM

Inventory #27988

Capacity 100 HP Blower.
25,000 CFM.
Filter area 4000 sq. ft.
C/W 16' support structure including 42' long leveling auger system and 12' auger for wagon loading area.
Return air ductwork included.
Summer and winter and fire gates included.
This unit can be expanded up to 100,000 CFM.
Plus additional piping...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 12

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.