|
|
 |
">
- Portable Hot-melt edgebander for the price of a hot-air machine.
- Ideal for on-site repairs or specialty and custom banding.
- Only 7 mins to warm up.
- Type of edgebanding ABS, PVC, melamine and veneer.
- Thickness 0.3 mm to 3 mm (1/64" to...
|
|
|
|
|
|
|
- Capacity thickness of edgebanding 0.5-3 mm.
- Working thickness 11-40 mm, minimum width 90 mm.
- Working length 280 mm.
- 1st aggregate guillotine end trim.
- 2nd aggregate top and bottom trim.
- 2nd aggregate 370w.
- Glue pot 1250w.
|
|
|
|
|
|
|
- Capacity thickness of edgebanding 0.5-3 mm.
- Working thickness 11-40 mm.
- Minimum width 90 mm.
- Working length 280 mm.
- 1st unit front and rear end trim saws.
- 2nd unit top and bottom trimmers with (2) 1.1 kW 12000 RPM motors.
- 3rd...
|
|
|
|
|
|
|
- Capacity thickness of edgebanding 0.5-3 mm.
- Working thickness 11-40 mm.
- Minimum width 90 mm.
- Working length 280 mm.
- 1st unit guillotine end trim.
- 2nd unit top and bottom trim 370w.
- 3rd unit buffing 90w.
- Glue pot 1250w.
|
|
|
|
|
|
|
- Capacity thickness of edgebanding 0.5-3 mm.
- Working thickness 11-40 mm.
- Minimum width 90 mm.
- Working length 280 mm.
- 1st unit guillotine end trim.
- 2nd unit top and bottom trim 370w.
- 3rd unit scraping.
- 4th unit buffing 90w...
|
|
|
|
|
|
 |
">
- Capacity end trim.
- Top and bottom fine trim.
- Scraping and buffing, PLC controlled, 200 Hz electronic frequency converter, .4 - 3 mm band thickness.
- Maximum width of edgebanding 3 mm x 60 mm high, panel thickness 10 mm - 60 mm, minimum...
|
|
|
|
|
|
|
">
- Capacity end trim.
- Top and bottom fine trim.
- Scraping and buffing, PLC controlled, 200 Hz electronic frequency converter, .4 - 3 mm band thickness.
- Maximum width of edgebanding 3 mm x 60 mm high, panel thickness 10 mm - 60 mm, minimum...
|
|
|
|
|
|
|
">
- Capacity end trim.
- Top and bottom fine trim.
- Scraping and buffing, PLC controlled, 200 Hz electronic frequency converter, .4 - 3 mm band thickness.
- Maximum width of edgebanding 3 mm x 60 mm high, panel thickness 10 mm - 60 mm, minimum...
|
|
|
|
|
|
|
- Capacity thickness of edgebanding 0.5-3 mm.
- Working thickness 11-40 mm.
- Minimum width 90 mm.
- Working length 280 mm.
- 1st unit guillotine end trim.
- 2nd unit top and bottom rough trim 0.5 HP at 12000 RPM.
- 3rd unit top and bottom...
|
|
|
|
|
|
|
- Capacity thickness of edgebanding 0.5-3 mm.
- Working thickness 11-40 mm.
- Minimum width 90 mm.
- Working length 280 mm.
- 1st unit guillotine end trim.
- 2nd unit top and bottom rough trim 0.5 HP at 12000 RPM.
- 3rd unit top and bottom...
|
|
|
|
* Price may vary with exchange rate.
|
