Additional Images:
Description:
Capacity (16) Cutter Stations. Dual carving heads. Has 360º swivel. 2 motor speeds 12,000 and 18,000. 16 spindles but 1 does not work, runs with 15 and worked great. Lots of tooling. 60 inches a minute and can hog out up to 1/4 inch per pass (lots of power). Used large servo motors 10x trans on Z. PC based controller. 10.5 inch between spindles. Set-up for 10 inch by 24 inch flat work in CNC mode with table. Great low hour machine, total rebuild a few years back, ran in CNC mode for three years 4 hours a day and never failed. C/W tooling and manuals,
Condition:
Good
Location:
South US  | 0 Recently Viewed  |
