Additional Images:
Description:
Capacity max. width 305 mm (1'). Bedframe 8 m long. Composed of 32 groups of 2 transport wheels of 15 mm (0.6") width. Driven by a motor with inverter control for speed variation from 10/60 m/mm. Through a 90º helicoidal gear transmission. Hot melt glue application head with forced glue circling. Melting tank. Tray for veneer or laminate strips. Quick adjusting guides for wrapping material access and knurled glue applicator roller (laterally easy to replace) with electronic speed control for veneer sheet and profile overlay synchronization. Gluing head raising system with analogic read out. Supports for laminating tools fastening. Set of standard wrapping tools. Quick adjustable guides for profile access. Conterpressure roller pneumatically controlled. Composed by silicon rubberized segments. Interchangeable to comprise all required sizes. Heigh adjustable first moulding roller. Turbine central air supply for the connection of air heaters. Electrical cabinet completely wired with raised independent control board. Using radiofrequency filters. According to electromagnetic compatibility 89/336/EEC norms. Security system with cable for emergency stop along the whole machine and protection grid for hot melt glue application roller according to EC standards. Transport wheels fast opening system (symmetric). Worm gear extruder to supply premelted glue according to the gluing head requirements. It includes a steel feed hopper for granulated hot melt glue with a peephole for level control. Motor power 22 kW. Tefloned lead screw with 8 kW heating power at the extruder outfeed. Max. glue melting capacity 100 kg/h (according to glue thermal hardness). Temperature probe and PID control display with programmed and actual temperature. Teflon-coated application head for PUR glue application. Top cleaning brush. 0.37 kW motor power. Rotating at 920 RPM. Brush 320 mm x 0 (5-1/2") 140 mm with protection cover and dust outlet 0 (3") 80 mm. 2 profile sid cleaning brushes. 0/18 kW motor power each one. Rotating at 1500 RPM. Brushes 70 mm (2-3/4") x 0 (4") 110 mm with protection cover and dust outlet 0 (2-1/3") 60 mm. 2 trimmers for lateral veneer surplus cut. With (2 x 0.55 kw) high frequency motors and electronic inverter in a safety housing. According to EC standards. Cutting device of coiled veneer or laminate behind the last profile or when the production stops. Special unwinding unit for rolled veneer with aluminum joint detection and a large guiding roller. (universal profile feeder op.0205 is a must). Unwinder air shaft 0 - 150 mm (6") with pneumatic brake and centering system for spools up to 0 600 mm (23-5/8"). 2 air heaters type PL for core preheating or glue reactivation. Including all electrical elements. Supports and wiring. Transformer 415-440 Volt to 220-380 Volt for up to 4 air heaters. Second conveyor driving motor with electronic speed control for profile speed-up of stand-by control for profile speed-up or stand-by for sheet overlay synchronization. Primer station with tank and 6 pads for profile scouring and preparing. Primer station safety housing. Hot melt glue dosage regulation with numerical read out. Tamping roller fast changing system. Optional automatic profile feeder with lateral loading system for additional $19,000.
Condition:
Brand new with warranty supplied by manufacturer
Year:
2002
Location:
Europe  | 0 Recently Viewed 
Back to Catalog Listing
|
