Additional Images:
Description:
Capacity for coating flat and moulded MDF workpiece with thermoplastic foils. Thermoforming press without membrane consisting of: Burkle-multifoiler model BTF1628/60 m heating plate 1600 X 2800 mm. Loading width 1600 mm. Operating area 1330 mm X 2630 mm. Minimum foil width 1450 mm. Workpiece thickness 6 - 35 mm. Backing panel 8 - 16 mm. Daylight opening 250 mm. Steel plate thickness 90 mm. Heating plate thickness including isolation 66 mm. Maximum heating temperature 140 deg.C. Heating power top plate 31 kW. Thermo oil recirculating 1.5 kW. Control Seimens SPS. Operating side right. Vacuum pump and reservoir. 2 off lay-up and feeding stations. Unloading respectively before and behind the press. 2 tables with separators and rapid clamping system motor driven. 1 table with Rapha jig system (manual pin system). 2 of decoil-stations. each for 2 coils with automatic foil cutting system. Maximum coil dimension 400 mm. Ionisation system. 5 of foil magazine carts each with 6 rollers. With cabinet. This machine was reconditioned in 2004 and new control was fitted.
Condition:
Very good
Voltage:
380/3/50.
Location:
Europe  | 0 Recently Viewed 
Back to Catalog Listing
|
