Additional Images:
Description:
Capacity frame made from a combination of tubing and fabricated plates. Tubes have minimum of 9 mm wall thickness, stress relieved and sand blasted for final finishing. Table made from heavy duty tubing and sheet metal with 36" deep water reservoir and equipped with 1.5 mm thick grid system which support up to 1200 LBS of work piece, optional support for heavier work piece is available. Locating pins: combination of 3 sides and 2 fronts. Heavy duty locating pins controlled through program for squaring the piece on the table. Axis description AXIS 1: X AXIS moves back and forth along the length of the machine. AXIS 2: Y AXIS moves back and forth along the width of the machine. AXIS 3: Z AXIS moves up and down along the height of the machine. AXIS 4: Abrasive control is to adjust the volume of the abrasive supply. General description of the machine a double sided supported gantry type CNC with the following specifications: available work area sizes: 4' x 8'. Traverse speed: (Maximum point-point positioning speed) X=40 m/min./Y=40 m/min./Z=20 m/min. Axis 1 (x) description (included), X is a linear axis along the length of the machine moving to back and forth of the work area. This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability. X-Axis is mounted on four sets of four rows size (30) linear bearings and rail system. Power and transmission on the X-Axis is provided by a powerful 1.5 kW digital. Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution). X-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. Axis 2 (y) description (included) Y is a linear axis along the width of the machine moving to left and the right of the work area. This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability. Y-Axis is mounted on four sets of four rows size (30) linear bearings and rail system. Power and transmission on the Y-Axis is provided by a powerful 1.5 kW digital. Brush less AC servo motor and drive system. With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution). Y-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. Axis 3 (z) description (included) Z is a vertical axis along the height of the machine up and down of the work area. This axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability. Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system. Power and transmission on the Z-Axis is provided by a powerful 900W digital. Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution). Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. Axis 4 (abrasive control) (included) spindle speed axis is a virtual axis. Commanding proper volume on abrasive to the cutting head. Electrical cabinet (included) all of our electrical components are CSA and CUL approved. The electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership. Our electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform. Use high flex shielded cables for all connections, cables are carried by all enclosed cable tracks to protect them from chips and external elements. Electrical system is approved by Ontario hydro and carries approval sticker. Control system (included), powerful PC based CNC controller with Windows XP operating system and 3 interpolated. 2 linear positioning axes. DXF converter generating machine codes automatically. G_Code import capability. Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windows environment. User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming. MDI menu for manual operations. Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time. Automatic spindle warm-up cycle. Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process (Not included). Optional cad/cam program (not included). Handheld pendant (included) is equipped with the following functions: Jog function on X/Y/Z axis enables the operator to jog the machine in forward and reverse mode. Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece. Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program. Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes. Pendant also supports incremental jogging for fine tuning adjustment for all axes. Safety barrier (optional) installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button, this option is an excellent safety feature to protect the operator from accidental contact with moving axes. Other specification power requirements: 600V 3 Phases at 55 Amps. Air requirements: 7 bars or 100 psi. warranty Advance Robotic Technology free of charge covers warranty service for 12 months after delivery. Customer would be charged for any warranty service call if the breakdown were caused by misuse or negligence. Please note that our liability is limited to defects of the items supplied by us. Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production. Profit losses. Etc price of the CNC machine 4' x 8' Net: CAD$82,000.00. 5' x 10' Net: CAD$98,000.00. 5' x 12' Net: CAD$116,000.00. Price is only for the CNC machine and does not include the price of the high pressure intensifier pumps . Abrasive delivery system. Cutting head and high pressure tubings. PART B: HP Intensifier Type HP19/37-S. Operating pressure : 400 - 3,800 bar. Design pressure : 4,000 bar. Volume flow : 0 - 3.8 l/min. or 1 GPM. Plunger diameter : 19 mm. Stroke length : 240 mm. No. of strokes : max. 33 1/min. Hydraulic pressure : max. 260 bar. Main motor : 37 kW. 600 V. 60 Hz. Noise level :75 dB (A). Including LP feed water filter (10 / 1 æm). Oil/air cooler. External HP filter (1 æm). HP pulsation dampener (V = 2.0 l). Automatic HP relief valve system. Sound-proofing insulation. Switch/control cabinet. Siemens C7 (S7) control system. Cutting water pressure control with proportional pressure controller. Maintenance Video-CD. German or English. Recommended Spare Parts Package No. II...
Condition:
Brand new with warranty supplied by manufacturer
Year:
2007
Location:
Canada  | 0 Recently Viewed 
Back to Catalog Listing
|
