Additional Images:
Video:
Click to view Video of this machine
Description:
Capacity work area size 5' x 12'. Frame made from a combination of tubing and fabricated plates. TABLE: Made from heavy-duty tubing and equipped with 1 mm thick grid system which support up to 900 LBS of work piece. Optional support for heavier work piece is available. LOCATING PINS: Combination of 3 sides and 2 fronts. Heavy duty locating pins controlled through program for squaring the piece on the table. AXES DESCRIPTION AXIS 1: X AXIS moves back and forth along the length of the machine. AXIS 2: Y AXIS moves back and forth along the width of the machine. AXIS 3: Z AXIS moves up and down along the height of the machine. AXIS 4: Laser control is to adjust power of the laser beam. GENERAL DESCRIPTION OF THE MACHINE A double sided supported gantry type CNC with the following specifications: Work area 5' x 10', traverse speed:(Maximum point-point positioning speed) X=60 m/min., Y=60 m/min., Z=20 m/min. AXIS 1 (X) DESCRIPTION (INCLUDED) X is a linear axis along the length of the machine moving to back and forth of the work area. This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability. X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system. Power and transmission on the X-Axis is provided by a powerful 1 kW digital. Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution). X-Axis is coupled to a high precision rack and pinion for ultimate accuracy and reliability. AXIS 2 (Y) DESCRIPTION (INCLUDED) Y is a linear axis along the width of the machine moving to left and the right of the work area. This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability. Y-Axis is mounted on four sets of four rows size (30) linear bearings and rail system. Power and transmission on the Y-Axis is provided by a powerful 1.5 kW digital. Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution). Y-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. AXIS 3 (Z) DESCRIPTION (INCLUDED) Z is a vertical axis along the height of the machine up and down of the work area. This axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability. Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system. Power and transmission on the Z-Axis is provided by a powerful 900W digital. Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution). Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. AXIS 4 (ABRASIVE CONTROL)(INCLUDED) Spindle speed axis is a virtual axis commanding proper volume of abrasive to the cutting head. ELECTRICAL CABINET (INCLUDED) All of our electrical components are CSA and CUL approved. The electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership. Our electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform. We use high flex shielded cables for all connections. The cables are carried by all enclosed cable tracks to protect them from chips and external elements. The whole electrical system is approved by Ontario hydro and carries approval sticker. CONTROL SYSTEM (INCLUDED) HANDHELD PENDANT (INCLUDED) The handheld pendant is equipped with the following functions: Jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode. Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece. Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program. Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes. The pendant also supports incremental jogging for fine tuning adjustment for all axes. Safety barrier (optional) installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button. This option is an excellent safety feature to protect the operator from accidental contact with moving axes. OTHER SPECIFICATION Power requirements: 600V 3 Phases at 55 Amps. Air requirements: 7 bars or 100 psi. WARRANTY Please note that our liability is limited to defects of the items supplied by us. Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production, profit losses etc. PRICE OF THE CNC MACHINE 5' x 12' Net: CAD$99,000.00 This price is only for the CNC machine and does not include the price of the high pressure intensifier pumps, abrasive delivery system, cutting head and high pressure tubing's. PART B: HP Intensifier Type HP19/37-S 1.1 1 Recommended Spare Parts Package No. II for HP Intensifier Type HP19/37-S For the detailed scope of supply, please refer to the attached spare parts list. Special Tool set Set consisting of: 2.1 1 Mounting Trolley for HP Intensifier for simplified disassembly of the HP pump head (HP cylinder) Synthetic plunger for easy packing removal Material No. 11-008827. Plunger assembly tools PL-19 Material No. 11-008683. Packing assembly tool 19/29 Material No. 11-009048. Blind plug AP60 Material No. 05-120712 2.6 1 kit Minimess flexible hose DN2 length 1,500 mm; 400 bar with special gauge connection ISO228-G1/4 Material No. 80-008329 2.7 1 kit Minimess gauge 0 - 400 bar Material No. 80-008225 3.0 1 Training and Instruction Video 4.0 1 HP Jet Valve PN 3800 with pneumatic actuator including collimation tube. Holder. Jet e.g. 0.25 mm excluding 3/2-way solenoid valve Technical data Operating pressure: min. 100 / max. 3,800 bar HP connection: M16 x 1,5 for tube 6.35 mm Actuation: electric /pneumatic. Instrument air: min. 6 bar. Max. 8 bar Control: via the plant control unit Safety position: closed when dead and depressurized Jets to be used: 0.10 to 0.35 mm max. dimensions: 70 x 275.5 mm Weight. Complete. : Approx. 1.2 kg 4.1 1 kit Tools for HP Jet Valve PN 4200 Material No. 05-139165 4.2 1 High-Performance Abrasive Cutting Head Type CENTERLINE R Inclusive ,extended life" focusing tube 0.8 or 1.0 mm. Article No. 635-0762-102. OD = 6,35 mm / L = 76,2 mm / ID = 1,0 mm The abrasive cutting head is suitable for The collimation tube of the HP jet valve So that rapid change-over from pure aqua Jet cutting to abrasive aqua jet cutting is possible. 5.0 Abrasive Storage and Metering System Consisting of: 5.1 1 Abrasive sand-metering unit Potentiometer or external signal from CNC Technical data Advantages Self limited abrasive suction. No forced metering. No abrasive head flooding. Infinitely variable metering with high precision. Easy to clean Plexiglas cover for visual monitoring. 1 Bulk abrasive transfer system / reservoir Type II. Abrasives are stored in a separate...
Condition:
Brand new with warranty supplied by manufacturer
Year:
2007
Location:
Canada  | 0 Recently Viewed  
Back to Catalog Listing
|
