Additional Images:
Description:
Capacity (short description) 3 axes 5' X 10' CNC router. Utilizing nested based manufacturing technology. C/W 10 HP spindle. 4 tool tool changer (ATC). C/W regen vacuum pump. All spindles, drives, bearings etc. are European made and the actual machine is completely manufactured in North America. The price as per the quote includes all the above including a slotted phenolic vacuum table top. Options such as larger rotary tool changers, wet or dry vacuum pumps, aggregates such as boring blocks with horizontal and/or vertical drills, 0-90º rotating saws, auto lube, hand held programmers, a larger z-axis, HSK 65 or ISO 30 tool holders etc. can be quoted seperately if requested. FULL DESCRIPTION FOLLOWS BELOW: moving gantry CNC router designed to cut. Capacity 3 axes CNC router designed to cut and mill wood and plastic materials. FRAME Made from a combination of tubing and fabricated plates. Tubes have minimum of 6 mm wall thickness. Stress relieved and sand blasted for final finishing. TABLE Combination of ribbed tubes and plates machined and finished with grooved tabletop. OPTIONAL LOCATING PINS Combination of 3 sides and 2 fronts. Heavy duty locating pins controlled through program for squaring the piece on the table. AXES DESCRIPTION AXIS 1: X AXIS. Moves back and forth along the length of the machine, AXIS 2: Y AXIS. Moves back and forth along the width of the machine, AXIS 3: Z AXIS. Moves up and down along the height of the machine, SPINDLE CONTROL Is to adjust the speed of spindle, The spindle can turn from 3000-18000 RPM and this speed is selectable through the program. GENERAL DESCRIPTION OF THE MACHINE A double sided supported gantry type machining center with the following specifications: Work area: X=121", Y=61", Z=6". Traverse speed:(Maximum point-point positioning speed) X=40 m/min. Y=40 m/min. Z=20 m/min. AXIS 1 (X) DESCRIPTION (INCLUDED) X is a linear axis along the length of the machine moving to back and forth of the work area. X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system. Power and transmission on the X-Axis is provided by a powerful 750W digital. Brush less AC servo motor and drive system with extremely accurate encoder feed back . X-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. AXIS 2 (Y) DESCRIPTION (INCLUDED) Y is a linear axis along the width of the machine moving to left and the right of the work area. Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system. Power and transmission on the Y-Axis is provided by a powerful 750 kW digital. Brush less AC servo motor and drive system. With extremely accurate encoder feed back. Y-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. AXIS 3 (Z) DESCRIPTION (INCLUDED) Z is a vertical axis along the height of the machine up and down of the work area. This axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability. Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system. Power and transmission on the Z-Axis is provided by a powerful 400W digital. Brush less AC servo motor and drive system. With extremely accurate encoder feed back . Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability. Z-Axis is balanced pneumatic counterbalance cylinders for high repeatability and positioning speed. AXIS 4 (SPINDLE SPEED) Spindle speed axis is a virtual axis. Commanding proper speed to the spindle drive. Our machine is equipped with variable speed spindle. Which can turn from a minimum of 3000 RPM to a maximum speed of 18000 RPM The spindle speed is configurable through the programming menu. SPINDLE MOTOR Permanent air cooled. 4 poles ISO-30 spindle motor for this application. Power of the spindle is 7.5 kW (10 HP) at 380V. AUTOMATIC TOOL CHANGE (ATC) Rotary type ISO-30 ATC with 4 tool capacity. Tool crib is located on the left side of the x-axis. (ISO tool holders. Included. Collets and tooling is not included) ELECTRICAL CABINET. (INCLUDED) All of our electrical components are CSA and CUL approved. The electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership. Our electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform. We use high flex shielded cables for all connections. The cables are carried by all enclosed cable tracks to protect them from chips and external elements. The whole electrical system is approved by Ontario hydro and carries approval sticker. CONTROL SYSTEM (INCLUDED) Powerful. PC based CNC controller with Windowsc XP operating system and 3 interpolated. 2 linear positioning axes. Controller is capable to work on 3 surfaces of front. Back and the top. DXF converter generating machine codes automatically. G_code import capability. Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windowsc environment. User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming. MDI menu for manual operations. Tool database allows for information of up to 50 tools to be stored and called through the program, The machine would pick up first 10 tools available in ATC automatically and asks the operator to insert manually the rest of 40 tools. Which are not in ATC, With this method although the number of ATC is only 4 but the tool change process extends to 50 tools during a programming cycle which speeds up the operation drastically. Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time. Automatic spindle warm-up cycle. Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process, (Not included) Optional CAD/CAM program, (Not included) OPTIONAL HANDHELD PENDANT The handheld pendant is equipped with the following functions: Jog function on X,,Y and Z axis enables the operator to jog the machine in forward and reverse mode. Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece. Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program. Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes. OTHER SPECIFICATION Power requirements for Europe and Asia: 220V 3 Phases at 35 Amps. Air requirements: 7 bars or 100 psi.
Condition:
Brand new with warranty supplied by manufacturer
Year:
2008
Location:
Canada  | 0 Recently Viewed 
Back to Catalog Listing
|
