Online Catalog - Recently Added (Within The Last Month)

IMA [K/1/R75/975/V/R3] - SINGLE SIDED EDGE PROCESSING MACHINE - SHAPES & BANDS - Inventory # 20528

No image available.

< Prev.

Zoom

Next >

SOLD

Additional Images:

Description:

Capacity for profiling and edging of panels.

Veneer/plastic from coil 0.4 - 3 mm max. contour depth 300 mm.

Workpiece length 300 mm - 2500 mm.

Thickness 12 mm - 28 mm infeed roller track divided into two.

Max. edging speed 10 meters/min.

Equipment includes 3 roller support track.

Infinitely adjustable from 5 - 25 m/min.

Left fence which is adjustable with servo-motor from 55 to 355 mm.

Lengthwise infeed with driven roller conveyors 1300 mm wide.

2000 mm long.

Crosswise with lay up for pieces up to 600 mm wide.

Profiling with 4 shapers.

Horizontal each with electronic positioning of the Y axis.

Manual Z adjustment with digital readout 7.5 kW 18000 RPM motors.

Waste removal conveyor belt to the right.

Sound absorbing safety hood.

Air jet.

Shaped edgebanding for contours: pneumatically swivelling with adjustable drive for double coil magazine.

Activation unit 10 kW with extraction system.

Strip sensor.

One main pressure roller and pneumatically swivelling additional pressure roller.

Electronic positioning control with AC servo drive for an infinite horizontally Y axis adjustment.

Manually adjustable bell type pressure device over the main pressure roller.

With angular stop approx. 35ş for 3 mm PVC edge.

Cutting knife for 3 mm PVC edge.

With glue application unit to put glue to the edging material in the machine.

Glue applicator 50 mm high.

Radii of at 100 mm diameter for 3 mm edgings.

For thinner material and outer radii depending on the bending range of edgebanding material.

Min. inner radius 70 mm due to the pressure.

Additional pressure track with electronic positioning control via AC Servo motor drive for an infinite horizontal adjustment of Y axis.

With swivel bearing counter pressure.

With pressure unit.

Additional set of roller for profile 20 mm bullnose.

End trimming unit for cutting the overhanging edging material at its front end and rear end.

Flush end trims with 5şs electronic positioning free adjustment range.

Control.

Two motor 0.2 kW 12,000 RPM.

Sound absorbing/safety hood.

Top and bottom trimming units with tracing.

Following along AC axis 2 x 1.5 kW with electronic position motors.

Flat scraping with tracing.

With electronic positioning for Y axis.

Combined grooving.

Scoring and cutting unit 4.4 kW motor.

Panel outfeed.

CNC line control.

PC 486 DX2.

IMATRONIC 231.

Software IMA win CAD System for Combi-Form (for programming complex contours).

Condition:
Excellent

Year:
1999

Location:
N/A

0 Recently Viewed

Back to Catalog Listing

Instant Email Quote:

Have a question? Ask Us! >

Learn about Machines of Interest to Me >