Additional Images:
Description:
Capacity machine length (26-1/2') 8080 mm. Maximum veneer width (15") 400 mm. Veneer thickness minimum (12mil) 0.3 mm. PVAc glue application roller (6") 150 mm diameter. IR glue curing screen 24 kW. Vacuum turbine motor power 1.1 kW. Conveying motor power 0.75 kW. Calendering top roller heating elements set 3x4.5 kW. Feed speed (13.79fpm) 4.24 m/min. Working height (35-1/2") 900 mm. Machine for fleece application on veneer strips. In order to make veneer more flexible and break-resistant for the wrapping of sharp edges and difficult profile shapes. The machine composition includes an infeed table with adjustable guides for veneer sheets. A roller application head for PVAc glue with doctor roller dosing system. An infrared drying tunnel with vacuum supported belt conveyor. A fleece roll uncoiling air shaft 76 mm (3") with centering system and pneumatic brake. A calendering pressure roller set and an outfeed table for the fleeced veneer. The glue is supplied to the gluing head. Just between the application and the doctor rollers. The glue dosing is realised by means of a spindle that controls the rollers separation. The fleece roll is loaded in its shaft adjusting the brake for a regular uncoiling. The veneer end is inserted into the gluing head under the application roller. The counter pressure roller raises automatically starting with the veneer gluing and feeding. The glued veneer enters then into the drying tunnel under the infrared lamps caught by the vacuum belt. Getting ready to stick against the fleece. The calendering zone contains three heated top rollers with pneumatic pressing power and three driven and cold counter pressure rollers. The electric heating elements inside the rollers achieve a roller surface temperature of 200C. The fleece gets in contact with the glued veneer surface in the first calendering roller set. The fleeced veneer exits the calendering zone in continue ready to get rewound or stacked. The machine is ready to get plugged to the factory's pressure net and includes air filter. Regulator and oilier. Electric cabinet with the necessary wiring and commanding according to EC standards. Pneumatic pump with electric glue level detector for automatic glue supply to the gluing head according to the glue requirements.
Condition:
Brand new with warranty supplied by manufacturer
Voltage:
575/3/60.
Year:
2007
Location:
Europe  | 0 Recently Viewed 
Back to Catalog Listing
|
