Additional Images:
Description:
Capacity automatic wrapper to accomodate product max. width 45" x max. height 36". Max. length 36" and up. Controls: main panel Nema 12 (36" x 36" cabinet on each unit). Mitsubishi PLC. Touch screen operation selection (Nais). Main 575 Volt // 3 Phase // 60 Hz // 20 Amp disconnect switch. Main fuses 20a. Auto/manual selector switch. Main control power push illuminated button. Safety lockout switch on door (shuts off control power). Open/close film clamp. Jog ring push button. Jog in feed conveyor. Jog exit conveyor. All controls 24 Volt DC. Ring drive motor 3 HP AC frequency drive. A/C tech 5 HP controller. Photo-eye sensor for carriage home positioning and end band counter. Full detailed electrical schematic. Electrical controls name brand. Obtainable from local suppliers. Ring: 60" ID ring bearing - timing belt drive. Ring speed variable from 0 to 45 RPM. Pass through height of product at 40". Ring support frame 1/2" steel plate reinforced with 3" x 3" x 3/16" HSS tube. Mechanics: pneumatic film cut with hot wire impulse cutter. Heavy duty 3" x 3" x 3/16" HSS tubing frame consturction. Fully guarded for operator protection. Standard name brand parts which can be obtained from local supplier. In-Feed and Exit Belt: 8' belt conveyor with 48 wide rough top belt in-feed and 8' long belt conveyor with 48 wide rough top belt at exit. 6" head roller & 4" tail roller. Speed 0 - 15 feet/min. 1 HP DC variable speed motor and controls. Soft start/stop control. Auto indexing of loads by photo eyes. Film Carriage: 10" Fox LINEAR pre-stretch film carriage. Supports film rolls 10" long x 10" diameter. Easy fill tensioning adjustment on carriage control. 1/2 HP DC 90 Volt motor film delivery drive. Power provided to film carriage by slip rings. Film prestretch set at 200% by factory. Delivery 10 to 11 weeks from date of purchase order and deposit. Warranty: 2 years on parts. Customers misuse or lack of maintenance will void parts warranty. Labor not included. These machines can not be operated out doors.
Condition:
Brand new with warranty supplied by manufacturer
Voltage:
575/3/60.
Year:
2007
Location:
Canada  | 0 Recently Viewed 
Back to Catalog Listing
|
