|
|
 |
- Capacity cutterhead 24" diameter.
- 14" width.
- 16 knife rows.
- Carbide tipped.
- 7 knives per row.
- 112 knives in cutterhead.
- Feed system (2) 5" diameter feed rolls with positive feed tooth design allows infinitely variable speed throughout 15 fpm to 60 fpm.
- Workpiece opening 5" thickness x 14" wide.
- Actual cut capacity depends on material.
- Dimensions.
- Moisture content.
- Feed speed.
- Etc.
- Max. recommended cut 5" high x 6" wide.
- Optional motor head - 150 HP 1800 RPM.
- Standard motor feed - 3 HP gear motor.
- AC vari-frequency controller.
- Production is estimated at 1.5 to 3 tons/hr.
- Includes starter and blower...
|
|
|
|
|
|
 |
- Capacity 80" Orbital ring.
- Infeed driven belted conveyor 72" capacity.
- Variable feed speed to ring wrapper.
- Then to outfeed conveyor 72" wide x 130" long 3/4 HP.
- Will use 20" film with variable tension and ring rotation speed all thru a central control panel...
|
|
|
|
|
|
 |
- Capacity 1400 mm (54.5") Superfici roll coater with 250 mm diameter rubber coated applicator roller 100 mm chromed doctor roller adjustable opening.
- 2 HP conveyor drive motor with electronic controller encoders.
- Variable feed matching speed 26 to 131 fpm.
- With Sorbini panel cleaner.
- Superfici two lamp UV curing oven 60" with variable speed and power level.
- Control cabinet and available at extra cost (2) 4' x 8' lift tables and convayers (infeed.
- Outfeed) +$4,800...
|
|
|
|
|
|
 |
- Capacity 32" Saw blade-comes with spares (2 or 3/$1000.00 per blade-included).
- 10 HP 3 Phase 600 Volt motor with E brake.
- Table size: 51 1/8"W x 51 1/2" D x 31 1/2" T - 1/2" thick steel.
- Height to Top of arm: 67".
- Weight: 1300 lbs.
- Cutting capacity: 10" x 14".
- Mitre capacity: 50°s to right side.
- Pneumatic cylinder dampens the pull and push movement of the cutting arm (cylinder is off an aircraft door)...
|
|
|
|

|
|
 |
- NC21 controller.
- Extended in-feed fence for placing parts in front of stop cams.
- Tiltable in-feed device with 4 inclined driven rollers.
- Top pressure: power driven double V-belt.
- Continuous variable feed = 5-25 m/min.
- Minimum working width = 150 mm.
- Max. working width = 2500 mm.
- Stop Cams (dog) spacing = 200 mm.
- Max. projection height = 25 mm.
- 2) 2.2 kW 6,000 RPM scoring motors (1 top.
- 1 bottom) bottom is tiltable up to 90 deg.,. 1) standard profile trimming unit 4.5 kW.
- 6000 RPM.
- Tiltable 90 deg.
- Pole-changing switch for rotation direction. max. tool diameter = 200 mm.
- 1) controlled jump cutting profile trimming unit 4.5 kW.
- 6000 RPM.
- Tiltable 90 deg.
- Pole-changing switch for rotation direction. max. tool diameter = 200 mm.
- 1) profile sanding PS10 unit.
- Swiveling - 45° to + 30 deg.
- Sanding belt speed 5.5/11m/sec.
- Felt sanding pad with quick change device.
- 1) panel edge blow off cleaning device with suction.
- 1) preheat station with 2 I.R. lamps for preheating panel edge.
- 1) hot stamping unit with 2 stamping rollers.
- Works with Friz applicators or Voorwood applicator rollers. max. foiling speed 15m/min.
- 1) foil unwind and rewind station with foil cool down device and end of foil or foil breakage indicator.
- 1) 400 mm long out-feed transport device.Both side of the machine are equipped the same...
|
|
|
|
* Price may vary with exchange rate.
For a complete listing of Recent Arrivals click here!
|